00-10622-GEN3-10 Nitrous Outlet Hornet 3 Standard Wet 4150 Nitrous Plate Kit

Description: ** This Kit Comes With A Free Nitrous Outlet Tee Shirt. We Will Send An X-Large Shirt With This Order. If You Need A Different Size Please Message Us What Size You Need **Nitrous Outlet - Hornet 3 Standard Wet 4150 Nitrous Plate System - 10 lb Nitrous Bottle Included Description: Hornet Dual Stage, Generation 3: The Hornet 3 is based on the Stinger 3 - the winningest nitrous plate on the market. Its conception is based in the idea that nitrous plates are not one-size-fits-all. Unlike the Hornet 2, the Hornet 3 discharges are designed to discharge right above the intake runner on deep plenum intakes. Design: The Hornet 3 is a dual-entry, dual-stage nitrous plate that provides a max flow of 870hp! The fuel discharge ports are on top and discharge at a downward angle towards the horizontal nitrous discharge. The nitrous will mix into the air stream allowing the engine vacuum to pull it into the cylinder. Distribution into the engine is dictated by the intake wall height and runner placement. Construction: The 4150 plate and cone are manufactured from 6061 billet aluminum. The nitrous plate is .75” thick and black anodized with engraved Nitrous Outlet logos and Fuel / N2O entry marking. The cone is anodized red and features 16 nitrous discharge holes and 16 fuel discharge holes that discharge 1-7/8" below the carb flange. Premium gaskets are included as well as Jetting for 50-100-150-200-250-300-350-400-450-500 horsepower shots, per stage. We even include fuel jetting for gasoline and E85! This is a standard system and utilizes two .122 nitrous solenoids and two .177 fuel solenoids. Braided stainless hoses are included to connect the solenoids to the plate, as are universal solenoid brackets. Application: The Hornet 3 is designed to discharge right above the runner on intakes that measure 2-3/4” or more from the top of the intake runner to the carburetor flange. On intakes that measure 2-1/2” or less, the discharge will flow right into the intake runner. It will fit most 4150 flange single-plane intakes for carburetion or EFI. Specs: 10 lb Nitrous Bottle IncludedRevolutionary GEN III DesignExtended Reach Cone870 HP Max FlowDual Entry4150 Flange360° Discharge PatternPrecise AtomizationAnodized Billet Aluminum Stinger PlateGasket, Jetting and Hardware IncludedNitrous Jetting for 50-500hp Per StageFuel Jetting for Gas and E85, 5-55psi Fuel Systems Dry/Wet: WetFuel Solenoid Size: .177 OrificeFuel Type: Gas and E85Hard or Soft Line (From Solenoids): Soft LineIntake Type: 4150 FlangeNitrous Solenoid Size: .122 OrificeSolenoid Bracket(s): Universal Shipping is FREE inside the contiguous United States. If shipping to Alaska, Hawaii or Puerto Rico please message us for a quote for additional shipping costs.

Price: 1501.94 USD

Location: Bumpass, Virginia

End Time: 2024-12-02T01:17:27.000Z

Shipping Cost: 0 USD