10 FT HIGH x 10 FT WIDE PIPE AND DRAPE KIT (WITH ECONOMY DRAPES)

Description: A complete pipe and drape kit with everything you need for an 10 foot high x 10 foot wide backdrop! What's Included In The Listing:2 pieces: 10'H Break Apart Silver Aluminum Slip-Fit Uprights, 1.5" Diameter2 pieces: 18" x 18" Silver Steel Slip-Fit Bases and Base Pins, optional edge protectors**1 piece: Adjustable 6-10 Foot Width Silver Aluminum Drape Support Rod4 pieces: 118"H x 48"W Economy Drape -- Choose drape color from drop-down menu Please note: the colors shown in the listing are for reference only and may not be exact as different browsers, monitors, and settings will show colors differently. Free sample swatches are available upon request prior to ordering. Economy drapes may have dye lot differences. **The edges of these bases can be raw or rough. Edge protectors help protect your hands and the flooring. If you choose to not have edge protectors, we suggest wearing gloves when handling these bases. About The Drape:Economy drape is a lighter weight fabric with an open weave pattern; it is fairly transparent, though not totally sheer. Economy drape blocks approximately 50-60% of light*. It is regarded as an industry standard drape fabric for convention centers. This Inherently Flame Retardant (IFR) fabric is designed to pass the NFPA 701 fire code. *This opacity scale is an approximation under normal circumstances. A variety of factors can affect the opacity, including the amount of back-lighting, spacing from a wall, and the overall brightness of the lighting used in a room. For example, using the drape near a wall makes it more opaque than if it's used in front of a window with sunlight shining through. In situations with a lot of bright lighting, you can make help make it more opaque by purchasing an additional drape panel (or two), sold separately in our store. For situations in which the drape must be completely opaque, it is recommended that you use our Commando or Velour fabrics. They are machine washable (gentle cycle, like colors, cold water, mild liquid detergent should be applied to the water prior to placing drape in the machine -- never put concentrated detergent directly into contact with drape as it may alter the color), can be machine dried (air only setting), and ironed (cool setting). NEVER EXPOSE THE DRAPE TO TEMPERATURES ABOVE 140°F. Please note: the colors shown in the listing are for reference only and may not be exact as different browsers, monitors, and settings will show colors differently. Free sample swatches are available upon request prior to ordering. Economy drapes may have dye lot differences. All drapes will be the color selected from the drop-down menu. Please contact us if you wish to have mixed drape colors (additional fee applies). About The Hardware: Uprights (vertical pipe): Style: Break Apart (6 foot bottom, 4 foot 4 inch top) Size when put together - 120"H x 1.5" diameter Weight - Approximately 5.1 lbs each Material - Aluminum Color - Silver Other - Four 90° slots are cut out at 36"H, 96"H, and at the top Bases (underneath each upright): Size - 18" x 18" with stacking slot Weight - Approximately 17 lbs each with included 6"H steel base pin Material - Steel Color - Silver Other - Edge protectors optional Drape Support Rod (horizontal pipe): Size - 72"L at collapsed size, 120"L at fully extended size, 1.5" diameter Weight - Approximately 3.5 lbs., max. weight capacity is 15 lbs. Material - Aluminum Color - Silver Other - Adjustable from 6 to 10 feet wide. Button stop at 8 and 10 foot intervals. What Is The Slip-Fit System? The slip-fit system is designed to be a tremendous time saver for setting up and breaking down your pipe and drape display. The uprights are hollow, allowing them to simply slip over the base pin (included with each base). The drape support rod features steel hooks at each end that slip inside of one of the four slots cut out at the top of the upright. Estimated set-up time varies based on the number of people and the speed at which he or she works, but should average about 5-10 minutes once the boxes are unpacked. The only tool required is a flat head screwdriver to screw the base pin onto the base (a very simple task). Other than that, no tools for assembly are required. What Are Break Apart Uprights? These durable aluminum uprights set the height of your pipe and drape display, and is the vertical piece of pipe that is located at each end of a horizontal drape support rod. Two pieces of pipe work together to make a 10 foot upright in this break apart system. A 6 foot section serves as the bottom of the upright and is put on the base, and a 4 foot 4 inch section serves as the top piece. The 4" portion, located at the bottom of the 4 foot piece, has a slightly smaller diameter and simply slips inside of the top opening of the 6 foot bottom piece, as shown in the listing photo. The break apart upright system satisfies two objectives: one is that it allows the upright to be shipped by Ground service, saving you a lot of money compared to having a fixed (non-break apart) 10 foot upright shipped because any box over 8 feet has to be shipped on a freight truck -- which can be very expensive! Secondly, having a break apart upright makes transportation much easier, as the biggest piece of the upright is only 6 feet long. This will fit in most vehicles, whereas a 10 foot fixed (non-break apart) pipe is virtually impossible to fit, or safely transport, in most cars. NOTE: Because it consists of two pieces (rather than one solid piece like our fixed uprights), the break apart uprights have a bit more wiggle room compared to our fixed uprights. This degree of wiggle can be significantly minimized by ensuring that the spacing between your uprights and drape support rod is correct when setting up your display. IMPORTANT: Use of products are intended for indoor, decorative use only. They should never be used where tip-over may cause injury or damage. Failure to use these products as intended will likely affect the safety of the products used and can result in injury or damage for which we are not responsible. The maximum weight capacity for the drape support rod is 15 pounds. Any box that is delivered, or component piece within a box, may be sharp, and should be handled with care. Additional Information: We answer any and all questions as quickly as possible. Our staff is available to assist you Monday - Friday from 9:00 am to 5:00 pm EST. We also sell all component pieces separately if an entire kit is not needed. Please contact us for more information.

Price: 399.99 USD

Location: Marietta, Georgia

End Time: 2024-11-02T18:00:24.000Z

Shipping Cost: 0 USD