10KG PLA/ABS/PETG Filament 1.75mm Black White Gray 10 Rolls PLA ABS PETG Plastic

Description: Standard PLA Specification *Wire diameter: 1.75MM *Tolerance: ±0.03MM *Printing temperature: 200-230℃ *Bottom plate temperature: need to apply glue when not heating *Heating 60-80℃, no glue *Rally (KGF): 11-16 *Melt index: 7-9g/10min (190℃, 2.16Kg) *Elongation at break: 4% *Printing speed: 50-100MM/s *Air bubbles: 100% zero bubbles *Net weight: 1 KG/roll *Gross weight: 1.2 KG/roll Standard PETG Filament Features: *PETG filament good toughness, high hardness, impact strength is 30 times more than PLA and the elongation at break of more than 50 time PLA. *Compatible printers must have heating device, can print models have strict requirement of toughness and strength, such as: pedant, also can print strongly heated-resistance and transparent models, such as: lampshde. *Diameter: 1.75mm *Tolerance: +/-0.03mm *Print speed: 50-100mm/s *Recommend print Temperature: 230-250℃ *Platform temperature: 80-120℃ *Net weight: 1kg *Gross weight: 1.2kg ABS Description 1. Has excellent impact strength and wear resistance; 2. Chemical resistance, dyeing properties, molding processing And mechanical processing effect is better; 3. The support is easy to peel off; Suitable for equipment with heating device on the bottom plate, printable Strong requirements for printing strength and the need for follow-up Processed models, such as: dyeing, polishing, electroplating Etc., suitable for making small parts. ABS Specification *Wire diameter: 1.75MM *Tolerance: ±0.03MM *Printing temperature: 230-270℃ *Bottom plate temperature: 80-120℃ *Melt index: 12-19g/10min (220℃,10kg) *Elongation at break: 25% *Printing speed: 50-100MM/s *Air bubbles: 100% zero bubbles *Net weight: 1 KG/roll *Gross weight: 1.3 KG/roll

Price: 187.81 USD

Location: China

End Time: 2024-12-30T07:51:37.000Z

Shipping Cost: 0 USD