10MHz Distribution Amplifier for GPSDO OCXO Rubidium w/8 outputs

Description: Item Description: For sale today is one 10MHz isolated distribution amplifier board with eight TTL compatible outputs for use with an OCXO or Rubidium source. This board has BNC connectors mounted vertically on the back side of the board. This board has 1" between BNC connectors in both directions on the output side. Board color is purple. The BNC connectors are name brand (currently AMP TYCO). Nuts and washers for the BNC connectors are included. Condition: This is a new (for now hand assembled) board that will take a sine wave or square wave input and produce eight 50 ohm TTL compatible outputs. The outputs are all the same level. The input is via an SMA connector and is transformer coupled. There is a pattern for a 50 ohm 1206 resistor on the board for terminating the input, currently not populated. Pictures show one of the outputs into a scope at 50 ohms and 1 megohm. Power required is 5VDC to 6VDC at under 250mA. The board is 1.8" by 3.65". The BNCs are be used to hold the board to a panel. The BNCs are located 1" center to center and are centered on the board. There is no manual or assembly instructions for this board. PayPal Confirmed Address: PayPal address must be confirmed and must be the same as the shipping address.Returns: All items are sold as-is unless otherwise stated. Returns: Returns accepted within 30 days. Feedback: Feedback is important to me, please email or contact me with any concerns, issues or problems before leaving feedback and give me the opportunity to work things out if needed. I always leave positive feedback after receiving feedback from the buyer, that way I know the buyer is happy and the transaction is complete. Shipping: Shipping is to USA only as this board is not RoHS compliant at this time.

Price: 79 USD

Location: New Hartford, Connecticut

End Time: 2024-11-25T19:28:31.000Z

Shipping Cost: N/A USD