12" Stacyc 12e Drive 2-Piece Battery Adapter (by Quiver Design Work)- MILWAUKEE

Description: 12" Stacyc 12e Drive 2-Piece Battery Adapter (by Quiver Design Work)- MILWAUKEE Much better than the 1-piece adapters which are known to break easily!!Battery Type: MILWAUKEE (Battery NOT Included)The original custom adapter from Quiver Design Works for running Stacyc bikes using MILWAUKEE 20v batteries!No mods to the bike needed and can still use OEM Stacyc batteries as well.Design is recently updated for the new 12/16 models and should not have any issues going forward.The unit clips into the stock battery slot and is secured with a single screw to hold the paddle in place, while the battery adapter is attached with some double back tape and zip ties around the seat post and top tube. The paddle is easily removable so that the stock battery you have can still be used as well!A note regarding battery drain - Stacyc bikes have a low voltage cutoff built into the bike, but designed around their own OEM batteries. If you regularly overdraw the Dewalt, or Milwaukee batteries, they may quit being recognized by the charger. SO - be careful and change batteries when low, and do not leave on bikes overnight as the phantom draw may brick the battery. Also, if the bike shuts off when the battery drains, don’t power cycle the bike and try to keep riding, that will also overdrain.IF this happens, you can try to “jumpstart” the battery - see video here:https://www.youtube.com/watch?v=q9DsL9PziyE*Disclaimer* Use of this adapter is at the user's own risk, and the seller does not claim responsibility for any damage to the bike, batteries, or injury caused by the use of the device or the item it is being used for. Accepting and using this item equates to an agreement to these terms, and the buyer will not hold the seller liable for any further damages or problems. For your own peace of mind, we suggest double checking the polarity of the adapter using a voltmeter prior to use. I do this for each unit before we ship it out, but its always good to have a double check, and we do not warranty or cover the cost of your bike if there happens to be any damage due to an error during assembly. If you damage your adapter and need help with repairs, please reach out, as we’ll be glad to help you get it up and running again. Much better than the 1-piece adapters which are known to break easily!!Battery Type: MILWAUKEE (Battery NOT Included)The original custom adapter from Quiver Design Works for running Stacyc bikes using MILWAUKEE 20v batteries!No mods to the bike needed and can still use OEM Stacyc batteries as well.Design is recently updated for the new 12/16 models and should not have any issues going forward.The unit clips into the stock battery slot and is secured with a single screw to hold the paddle in place, while the battery adapter is attached with some double back tape and zip ties around the seat post and top tube. The paddle is easily removable so that the stock battery you have can still be uséd as well!A note regarding battery drain - Stacyc bikes have a low voltage cutoff built into the bike, but designed around their own OEM batteries. If you regularly overdraw the Dewalt, or Milwaukee batteries, they may quit being recognized by the charger. SO - be careful and change batteries when low, and do not leave on bikes overnight as the phantom draw may brick the battery. Also, if the bike shuts off when the battery drains, don’t power cycle the bike and try to keep riding, that will also overdrain.IF this happens, you can try to “jumpstart” the battery - see video here:https://www.youtube.com/watch?v=q9DsL9PziyE *Disclaimer* Use of this adapter is at the user's own risk, and the seller does not claim responsibility for any damage to the bike, batteries, or injury causéd by the use of the device or the item it is being uséd for. Accepting and using this item equates to an agreement to these terms, and the buyer will not hold the seller liable for any further damages or problems. For your own peace of mind, we suggest double checking the polarity of the adapter using a voltmeter prior to use. I do this for each unit before we ship it out, but its always good to have a double check, and we do not warranty or cover the cost of your bike if there happens to be any damage due to an error during assembly. If you damage your adapter and need help with repairs, please reach out, as we’ll be glad to help you get it up and running again.eBay integration by

Price: 89 USD

Location: Cathedral City, California

End Time: 2024-10-12T02:07:58.000Z

Shipping Cost: 0 USD