1986-1995 Mustang 5.0 Edelbrock Performer RPM II Intake Manifold

Description: This is a new intake manifold that was damaged in transit. Both the upper and lower intakes have damage on them. The lower intake is damaged on the mounting surfaces for the heads, the damage is minor and should not affect the way it mounts. The upper is damaged on the top surface and has dents and scratches on it. Vehicle Fitment Ford Mustang - 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 Engines: 5.0 Fitment Notice Fits 1986-95 Mustang 5.0 1994-95 Mustangs will require throttle body adapters May run into clearance issues with the factory hood, especially in 1994-95 Mustangs. Intake manifold spacers will decrease hood clearance, requiring a taller hood. Will not clear factory strut brace. Air valve location is 0.30" higher and 0.50" forward from stock. Overall height: 11.13" Use RTV sealant to properly seal the end seals on lower intake manifold. Hardened washers must be used with intake bolts to ensure proper torque and prevent the galling of the aluminum. Description Made in the USA Benefits Increased Torque Increased Horsepower Adds Under Hood Styling Features V-Shaped Crossover 1,500-6,500 RPM Band Black Powder Coated Finish What's in the Box (1) Upper/Lower Manifold (1) Plenum Access Cover (1) Upper/Lower Intake Gasket (1) Plenum Cover Gasket (1) 10" Long 5/32" Vacuum Line (1) PCV Baffle Plate All Necessary Hardware & Hose Fittings To Install Intake Manifold (1) 3/16" Vacuum Tree Fitting (2) 1/8" Pipe Plugs (1) 3/8" Pipe Plug Installation Instructions Edelbrock Performer RPM II Intake Manifold - Black The Performer 5.0 RPM II manifold for 1986-95 5.0 Mustangs has shown significant gains in horsepower over existing designs in the 1500 to 6500 RPM range and is ideally suited for street and strip applications. This manifold consists of a V-shaped crossover with an increasing cross-sectional area, which passes over to eight large tapered runners. The upper manifold has a powder-coated black finish for a great look and corrosion resistance. A 70mm throttle body opening is used to allow for the additional required airflow.

Price: 860 USD

Location: Hewitt, Texas

End Time: 2024-11-06T18:29:38.000Z

Shipping Cost: 0 USD