2016+ Camaro SS/ZL1 & CTS-V Oil Cooler Adapter

Description: Improved Racing is proud to introduce the first oil cooler adapter for the 6th Generation Chevrolet Camaro SS and ZL1. This oil cooler adapter allows you to completely replace the factory water-to-oil cooler with an aftermarket air-to-oil cooler. Deleting the factory cooler in favor of an air-to-oil cooler will not only lower oil temperatures but will also reduce coolant temps. This is a must-have for track use.The oil cooler adapter bolts directly to the 6th Generation Camaro oil pan in place of the factory cooler. For street cars, we recommend also installing an inline oil thermostat to ensure oil comes up to operating temperature quickly and does not become over-cooled during casual street driving. Our FSM series oil thermostat is recommended for this application.The optional factory cooler delete kit includes a plug for the coolant passage in the engine block as well as a cap and hose clamp for the extra radiator coolant port that will be unused after deleting the factory oil cooler.Need an oil cooler? Check out our MHX series oil coolers for compact and highly efficient solutions. If you need assistance piecing together a complete oil cooler kit, contact us, we can help!Features and Benefits 100% bolt-on in place of the factory water-to-oil cooler Allows for plumbing of an air-to-oil cooler for reduced oil and coolant temperatures Features -10AN female ORB ports with optional adapter fittings 6061-T6 billet aluminum construction with black MIL-A-8625 Type II anodized finish Lifetime Warranty Made in the USA Includes 1x Oil cooler adapter plate 2x Black anodized -10AN or -12AN adapter fittings with Viton O-rings (OPTIONAL) 2x Viton O-ring seals 3x Zinc-plated steel Class 10.9 mounting screws Installation Notes Requires deleting the factory water-to-oil cooler (see optional factory cooler delete kit) Applications 2016-Present Gen 6 Chevrolet Camaro SS and ZL1 2016-2019 Cadillac CTS-V Other vehicles equipped with GM oil pan part number 12639931, 12668314, or 12684490 Required Parts Sold Separately EGM-136 cannot be installed without first deleting the factory oil cooler. Factory Oil Cooler Delete Part Number: E6G-680 Optional Parts Sold Separately Line Adapter Fittings (Optional) Use these fittings to adapt the ports to the line sizes listed below. These fittings are required except when using hose ends with male O-ring boss connections. Select the adapter fittings according to your oil line size (-10AN is recommended) Note: Our fittings are required to guarantee compatitility with our products, as some aftermarket fittings may cause interference and improper function. Line Size Part Number Qty Required -8AN OM-10-08 0-2 -10AN OM-10-10 0-2 -12AN OM-10-12 0-2

Price: 159 USD

Location: Orlando, Florida

End Time: 2024-09-13T12:40:53.000Z

Shipping Cost: 9.95 USD