2024 LAUNCH X431 CRP123 VII+ OBD2 Diagnostic Scanner ABS SRS Fault Code Reader

Description: 2024 LAUNCH X431 CRP123 VII+ OBD2 Diagnostic Scanner ABS SRS Fault Code ReaderLAUNCH Creader VII+ V2.0[2024 New Model]All System Scan Tool with 3 Reset Oil Service/Throttle Relearn/SAS Reset,OBD2 Scanner Diagnostic Tool🎁 F-ree Gift :EL50448 TPMS Reset Relearn Tool Auto Tire Pressure Monitor Sensor For GM Series*1About this item🎈【New Elite Version, Easy to Use】Work out of Box/Function as LAUNCH CRP123X/Lifetime Update/5 YEARS Back Up.🚩🚩Note:1. The product is a four-system tool, unable to scan the whole system, 2. The automatic scanning function is only for obd2 vehicles after 2006, not all vehicles, 3. If it cannot be charged, it may be a problem with the charging cable, you can reach us to resend a charging cable, or it may be a product problem, we can resend it soon. If the product loads slowly, it may be a network problem, try switching to a better network. If you encounter any problems, please rea-ch us, we will help you solve until you are satisfied, thank you.🎈 【Engine/ABS/SRS/Transmission Diagnostic Tool】The Creader VII+ V2.0 obd2 scanner is perfect balance of power and affordability, providing the ability to view preset, or user defined, live data streams for ENGINE, AT, ABS and SRS data, the ability to graph, record, replay and print data, read and resets codes for engine/abs/srs/transmission system.(Note: Does not work for other System and does not have Special services!)🎈 【Full OBDII Test Code Reader】 LAUNCH Creader VII+ V2.0 scan tool supports all 10 modes of OBDII standard to ensure complete, accurate, system diagnosis. Read and Clear DTCs, do smog tests , I/M readiness and O2 sensor tests, Mode 06 EVAP system test, Mode 08 on-board test component test. And OBDII Code lookup tool and acronym database to assist and speed diagnosis and repair time.🎈【 Live Data Stream + Advanced OBDII Scanner + Lifetime Update】 Launch Creader VII+ V2.0 scanner support for Generic OBDII Codes (P0, P2, P3 and U0); manufacturer specific codes (P1, P3 and U1); pending codes; freeze frame data; monitor and I/M readiness; live PCM stream data; graphing functionality for up to four (4) live data streams include the Engine Coolant Temperature, Long&Short Fuel Trim, the change of Accelerator Pedal Position Sensor , Throttle valve position , Generator load signal,Fuel Tank Pressure , Engine RPM, Intake Ait Temperature and so on; clears DTC codes and turns off the MIL; resets monitors; provides Data Link Connector (DLC) location hints.🎈【Extensive Vehicle Coverage + 10 Languages】The LAUNCH Creader VII+ V2.0 reads data from ENGINE, TRANSMISSION, ABS and SRS systems from Asian, US and European manufacturers. Coverage includes for Suzuki, for Honda, for Mitsubishi, for Nissan, for Toyota,for Mazda, for Hyundai,for Kia, for Subaru,for Infiniti, for Lexus, for Acura, for Isuzu, for Ford, for GM, for Chrysler, for Benz, for BMW, for VW, for Opel, for Volvo, for Fiat,for Land Rover, for Seat, for Skoda, for Audi,for Porsche, for Saab, for Jaguar and many others. Support 10 different languages.Note: Please rea-ch us your VIN to Check Compatibility before purchase.🎈【Worthy to Buy】Compared to other automotive scanners priced between 50-200 dollars, the LAUNCH Creader VII+ V2.0 OBD2 scanner has the multiple advantages. In addition to FULL OBDII diagnostic functions, it also serves as an ABS&SRS scanner, especially the transmission scanner, and an engine checker. When used as an OBD2 scanner, it can be used to check if your car is ready to pass the annual test through the I/M readiness menu, saving your money and ensuring your safety. Furthermore, it has various features, such as real-time data stream shown up, built-in DTC library, data record, playback and printing etc.🎈【Lifetime Update & 5 Years Back Up】The LAUNCH Creader VII+ V2.0 OBD2 scanner supports lifetime free software upgrade with the newest vehicle data and functions and keeps updating. We provides 5 Years Back Up, 90 Days No-Reason-asked Return for refund. And there is a 7/24 technical support. [Please Attention] If you encounter any issues about compatibility, register or update, please don't hesitate to reach us. We will check it asap.LAUNCH Creader VII+ V2.0 ABS SRS TRANSMISSION ENGINE Code ReaderCheck Car Engine Code Reader with Lifetime Update Why Should You Choose LAUNCH Creader VII+ V2.0? 1. When your car has problems, you no longer have to take your car to the auto parts shop, this obd2 scanner can help you with quick diagnosis and detection, and then solve your problem in seconds. 2. When you fix a problem with your car, but the inspection finds that the warning light is still on, this odb2 scanner will help you turn off the warning light after you finish the repair. 3. You use the obdii scanner of comparable price, many codes can not be read, the data is incomplete, and when you want to diagnose other systems, it is found that it cannot be done, this odb2 scanner can display the data information of the whole system, and clearly show the fault code in the way of data flow. There are More Advantages Than Other Similar Scanners with the same budget? 1. F-ree upgrades for life. The way to upgrade is very simple 2. Work Out of the box, plug and play 3 Four System Scan with full OBD2 Modes for Lifetime Update 4. The ergonomic design of the body allows you to hold the product effortlessly and do not worry about sliding down 5. Although it is connected with a diagnostic cable, it is very stable and can work even in places without WiFi 6. There is no electricity and do not worry, you can plug in the car at any time to charge, no charging line is required 7.Light and easy to carry, can be placed in the seat bag or anywhere There's more. . . [Please Note]The major return cause of "Defective" or “Item does not work”focus on: 1.Unable to register or update,Note: Creader VII+ V2.0 can only be connected with Windows system for downloading software or updating, but not ios system. And we have put update steps in the product video and description. 2.Does not scan car model. Note: The LAUNCH Creader VII+ V2.0 can not scan all cars,please check the compatibility. 3. Does not read codes.Note:Creader VII+ V2.0 can only read the code of 4 systems ENG,AT,ABS,SRS, and cannot read other systems. 4.Does not communicate with my truck,Note: The Creader VII+ V2.0 does not work with trucks, only obd2 vehicles after 2006 5. Receive used products. or does not receive the cable. Note: This problem will be fixed.Four System Car Diagnostic Scanner for 99% CarsOBD Diagnostic Scanner for All Cars LAUNCH Creader VII+ V2.0 can Read and clear fault codes, I/M Readiness, Data Stream, Freeze Frame, vehicle Information, O2 Sensors test, EVAP system test etc, view live data stream and turn off the warning lights in the Engine system, Transmission system, ABS and SRS. Note: Please rea-ch us your VIN to Check Compatibility before purchase. Transmission system: Read and clear codes and view live data in transmission systems, keeps the transmission systems output optimally adapted to the speed and load. Retrieve the error information from Automatic Transmission (AT) which is a type of motor vehicle transmission that can automatically change gear ratios as the vehicle moves, the driver from having to shift gears manually.Anti-Lock Braking System (ABS system): Read and clear DTCs data flow in the ABS system. Performs various tests to check the operating conditions of Anti-lock Braking System, and turn off the warning light.Supplemental Restraint System (SRS System): Safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic device can detect every electronic parameter to check its health status.Read and clear fault code in SRS (Airbag) system and turn off warning light of airbag for making sure engine work properly and safely.Engine System: The Creader VII+ V2.0 diagnostic tool can help detect the engine ignition, fuel injection, air and fuel ratio, and exhaust emission conditions in Engine system to enhance vehicle performance, save energy and reduce exhaust emission. Full 10 OBD2 Modes for 2006-2024 & Newer Cars: Read and Clear DTCs: Show the detailed description of the Diagnostic Trouble Code (DTC) and clear/reset the diagnostic information.Turn-off Malfunction Indicator Light (MIL):Turn off annoying Check Engine Light after servicing and repairing.Read I/M Readiness Status: Show whether the various e missions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.Read Live Data Stream: Show the information of continuous data stream from vehicle in live graphic (waveform) display.Able to store/playback/share/print.Read Freeze Frame Data: Check certain vehicle conditions which are recorded by on-board computer at time the e mission-related fault occurs.O2 Sensor Test: Show the last results of O2 sensor test in graphic display for troubleshooting.On-Board Monitor Test: Read the results of on-board diagnostic monitoring tests for specific components/systems.EVAP Test: For F-uel Tank System (Carbon canister test).Retrieve Vehicle Information: Display the information such as VIN (Vehicle identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.Multiple Intuitive Live Data Display4 IN 1 LIVE DATA STREAM CAN BE RECORDED/SHARED/SCREENSHOT/PRINTED LAUNCH Creader VII+ V2.0 Can support Real-time data stream analysis, reads, records, graphs and replays live data streams for ENGINE, TRANSMISSION, ABS and SRS Systems. What is the advantages of using it? This OBDII diagnostic scanner has big size LCD color screen .it also shows live vehicle sensors data in text,multiple graph format shows 4 live Readiness and allows you to focus on any suspicious or symptom-specific data parameters of full system. How to select it to see more clearly? Just select the factor you want to display, and then click "graph". The targeted factors will be shown in single graph, multi graph and you can merge two graphs together. 4 in 1 Live Data Stream in Graph: The LAUNCH Creader VII+ V2.0 code readers & scan tools will show you real-time data in text and graph like engine speed, engine coolant temperature, f-uel system status, short term f-uel trim, low brake fluid level,faulty speed sensor, defective ABS module, checked light bulb ,worn hydraulic pump etc.DATA Record&Playback: Allow you to record the live data stream and view the data of a certain point in a targeted manner. So that you can view the data more clearly. After you have recorded the data for a period of time, if you want to view and analyze the data just recorded, you need to use data stream playback function to help you. You can view the data at any time you recorded. Then you can choose " Combine", " Report" and " Record". Live Data Share: It will let you share any data status and content you want to display anytime, anywhere. You can send it to your friend or mechanic to help you solve complex problems.View History: Once a vehicle diagnosis is performed, it will record the every detail of the diagnostic process. The History function provides quick access to the tested vehicles and users can resume from the last operation, without the necessity of starting from scratch.One-Click Generate Health Report : Health Report will scan all vehicle modules and give you a status list for each modules condition .This diagnostic tool can automatically generate a diagnostic report when diagnostic work is successfully finished.The reports are saved to the internal memory for later review. The reports are able to be saved in P DF format, and as the tablet is equipped with WIFI, these can be emailed to the office or directly to the customer.DATA Share:You can share the diagnostic report by mail quickly if you need the technician to help you to solve the problem.Saving your time!Data Print: Live data are displayed in a time-based chart to help customers to better analyze the abnormal parameter.This function will let you see full system's performance information, if there are any trouble codes or issues with your system. You also can print the diagnostic data on computer. How to Register and Update This Scan Tool? (Tips: Free Update for Life-long time) There are two methods to update the device: Update via TF card (strongly recommended) or update via USB cable.Step 1: Go to LAUNCH official website (refer to the "User Guide" in the "Product guides and documents "section of product webpage) and click Updating Tool Download icon.Step 2: Download and install the Creader VII+ updating tool and launch the program when installed.Step 3: Enter the Product Serial Number (located at the back of the tool), and hit [Upgrade] and enter the register page, type your email address and "Register Code" (check the "Register Code" on the "Help--Tool Information" menu), then hit [Submit].Note: the “User password” is equal to the “Register Code.”Step 4: Install the TF card from the tool into the supplied USB TF card adapter and insert into the USB port of the computer.Step 5: Reopen the Creader VII+ Updating tool, select the updates you would like to preform or click “Select All” and click Download to start downloading.Step 6: Once all steps are complete, reinsert the TF card into the tool and power the tool via USB in computer or via OBD2 port in vehicle. The tool will prompt you to upgrade, select OK button on tool to proceed.10 LANGUAGES SUPPORT This car scanner diagnostics includes English, French, Spanish, Portuguese, Japanese, Russian, Korean, Swedish and many more languages, you can f-reely switch to your local language without any obstacles. HEALTH REPORT PRINT VIA PC Perform a complete diagnosis of your car anytime, anywhere with Creader VII+ V2.0 V2.0 PLUS Elite all system diagnostic tool by yourself,and you can print it via PC to your mechanic for help.It enables you repair the problem yourself, or let you know exactly what needs replacement in case you need to take your car to a repair shop. This helps you avoid blind maintenance and repair costs that could amount to hundreds or thousands of dollars!!User-friendly diagnostic tool---Great helper for saving m-oney and time! NEW FUNCTIONS!!! 3 Special Functions (Worth 200), Without any Fee & Continuous Growth We understand that many of our users are interested in performing more advanced reset functions by themself. In response to this, we have included several useful features in the Creader VII+ V2.0 V2.0 PLUS OBDII diagnostic scanner as a free update to meet your daily needs. Need to turn off the oil light, reset the mileage, or driving time? The Oil Reset function is here to assist you. If the service light is illuminated, you'll need to reset the mileage or driving time to turn off the light and enable a new service cycle.After changing the engine oil or any components related to oil life monitoring, you'll need to reset the service light. Require a reset of the steering angle position sensor? Give the Steering Angle Calibration a try. To reset the steering angle, first find the reference position where the car can drive in a straight line. This position will serve as a zero-point for calculating accurate left and right steering angles.After replacing the steering angle position sensor, make sure to also replace any steering mechanical parts such as the steering gearbox, steering column, end tie rod, and steering knuckle. If the throttle assembly has been replaced and needs a reset, let's explore the Electronic Throttle Position Reset/Learn function. Replacement of Throttle Assembly :When the throttle assembly is replaced with a new one, it is essential to perform a throttle reset. This is because the ECU needs to learn the new throttle's operating parameters and ensure optimal performance.ECU Replacement: If the ECU itself is replaced, it may not store the previous throttle working features. In such cases, a throttle reset is required to establish a new connection and allow the ECU to learn the throttle's characteristics.ECU Power Disconnection: When the ECU is disconnected from power, such as during maintenance or repairs, its memory is lost. As a result, a throttle reset becomes necessary to re-calibrate the throttle and restore proper functioningReplacement or Removal of Intake Pipe: If the intake pipe, which connects the air filter to the throttle body, is replaced or removed, it can impact the idle speed control mechanism regulated by the ECU. Performing a throttle reset helps the ECU adapt to the new airflow conditions and ensure accurate control of the throttle.Throttle Cleaning: Occasionally, the throttle body may require cleaning due to carbon buildup or debris. Although the idle throttle potentiometer features remain unchanged, the cleaning process can alter the airflow and affect idle speed control. Thus, a throttle reset is necessary to re-calibrate the throttle based on the new airflow characteristics. Note:The special functions do not apply to all models, if you are not sure whether these functions are applicable to your car model, you can ask us before you purchase. If you need other special features, you can purchase the software from the ‘Mall’. Please confirm with us whether the function is suitable for your car before purchase.PaymentDelivery detailsTerms of salesAbout usContact usPaymentWe accept all common forms of payment such as Credit cards、Debit card、Google Pay ect. Please contact us if you need to use another method to pay.Payment should be made within 7 days after bidding ends.Otherwise a Unpaid Item case will be opened to you.We are not responsible for buyers’ local taxes.Please include your special requests in eBay note if there is any.Delivery detailsShipping:Most orders placed by 1PM eastern time, Monday thru Friday will be shipped within 1 business day after payment confirmed. All orders placed over the weekend will be shipped on Monday.We have warehouse in USA, UK, HongKong, Australia, Russian, Germany and China warehouse.Notice: For USA Buyer, we have warehouse located in Kentucky, Los Angeles & New Jersey etc. (East Side & West Side of USA), parcel will be shipped from the nearest warehouse according to buyers' eBay address in the paid ORDER.1. From our US/DE/UK/AU warehouse via UPS / DHL or other eCommerce shipping. Delivery time varies from 2 to 6 business days. 2. From our Hong Kong warehouse via UPS / DHL / FedEx Ground etc. Delivery time varies from 3 to 7 business days.3. From our China warehouse For US buyers, we use e-Packet (Delivery time is 5-12 business days) or express delivery(Delivery time is 3-7 business days) . For other countries' buyers, we use China Post or Hong Kong Post (Delivery time varies from 10 to 25 business days) or Express delivery (Delivery time is 3-7 business days).We will ship according to buyers' eBay address in the paid ORDER. Please make sure it is correct and including phone number for delivery.If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.Please include your special requests in eBay note if there is any.Terms of sales We are authorized distributor, our all items are 100% original and all our products have warranty, 12 months free repair for the main devices. 3 months for the accessories. Please contact us firstly when you need warranty service. In case an item arrives faulty, please contact us in 30 days and keep it unused. We will instruct you on how to return and get refund or replacement. If after 30 days, or the item has been used, we have the rights to decline your claim. Items should be returned on buyers’ cost for repair or replacement. About usWho We Are?We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years. We are authorized first class distributor of Topdon. What Do We Have?We have office and warehouse in USA, UK, HongKong, Australia, Russian, Germany and China to ensure fast shipment and after-sale service. We have more than 100 employees devoting to customer satisfaction.Terms of tax:We are not responsible for buyer's local taxes, please consult your local customs for tax details.Contact usOur customer-oriented service strives for buyers' 100% satisfaction.Please feel free to contact us via eBay message once you have any question before leaving neutral / negative feedback or open case. We will reply in 24 business hours.Business time: GMT8 (9:00-18:00) from Monday to Friday. Please leave us Positive Feedback and 5-stars★★★★★ selling ratings if you receive the product and are satisfied with it. as you know, every seller works hard for the positive feedback. We will do the same as soon as we can too.

Price: 109 USD

Location: Los Angeles, California

End Time: 2024-10-27T10:48:14.000Z

Shipping Cost: 0 USD

Product Images

2024 LAUNCH X431 CRP123 VII+ OBD2 Diagnostic Scanner ABS SRS Fault Code Reader

Item Specifics

Return shipping will be paid by: Seller

Returns Accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Return policy details:

Brand: LAUNCH

Manufacturer Part Number: LAUNCH Creader VII+ V2.0 CRP123 V2.0,Creader VII+,CRP123,CRP129

OBD Interface: CAN, EOBD, OBD, OBDII

Accessories: Adapter Cable, Memory Card, USB Cable, User Guide

Features: Data Record and Replay, Backlit Display, Check Engine Light Shut Off, Color Display, Erases Codes, Freeze Frame Displays, LCD Display, Multi-Language Interface, User Friendly

Warranty: 5 Year

Vehicle Type: Passenger Vehicle

Connectivity: 16 PIN OBDII Cable

🚩Software update: Life-time free update

🚩Screen: 4” TFT LCD Display

🚩External Dimension: 195*106*32（mm）

Type: Car Diagnostic Tool Scanner

Type 1: 4 System Diagnostic Tool

Warehouse: US Stock

UPC: Does not apply

Similar Model 1: LAUNCH Creader VII+ CRP123X CRP129 CRP129X

Similar Model 2: FX2000 NT624 NT520 NT650 NT630 NT510