2kw 3KW 5kw 10kw Wind Power controller Grid-tied Inverter single 220v three 380v

Description: Model WWGI20 WWGI30 Wind Turbine Input Rated input power 2kW 3kW Max. input power 3kW 3.5kW Rated input voltage 240Vac MPPT voltage range 60Vac~300Vac Rated input current 2.4A 4.8A Max input current 3.6A 7.2A Cutting speed 60RPM（factory default，0-1499RPM settable） Power tracking 30 points set power curve Speed limit control Electromagnetic speed limit Manual brake Press“Enter” and“ESC” at the same time to completely unload Tune the switch on the panel to "Brake", three-phase AC short circuit, turn to "RUN" to run. Brake by overcurrent 4A（factory default,0-5A settable）it dumps load completely when over current, and will recover after 10mins automatically 8A（factory default,0-10A settable）it dumps load completely when over current, and will recover after 10mins automatically Brake by over rotational Speed（optional） 300r/min（factory default，0~1499r/min settable）Unload completely when reached the set rotational speed, and recover automatically after 10mins. Brake by over wind speed（optional） 18m/s (0~30m/s settable), it dumps load completely when reached the set wind speed, and recover automatically after working 10mins and wind speed is less than 15m/s. AC Output Grid Type Single-phase Rated output power 2kW 3kW Max output power 2.2kW 3.3kW Rated Grid voltage 220Vac Grid voltage range 85%~110% of rated grid voltage Rated Grid frequency 50Hz/60Hz Work frequency range 49Hz~51Hz/59Hz~61Hz Rated output current 4.5A 9.1A Rated power factor ＞0.98 Thdi ＜5% (at rated power) DC component ＜0.5% soft start Yes Restoring grid-connected functionality Yes Auto on/off Yes Protection Functions Grid overvoltage/undervoltage protection Yes Grid over frequency/under frequency protection Yes output short circuit protection Yes Grid power failure protection Yes Anti-islanding protection Yes Over-temperature protection Yes Lightning protection Yes Residual current protection Yes General Parameters Display mode LED+LCD Display information Display: wind Voltage, Wind current，Wind power, Wind Speed, Pole Paris; Inverter voltage, Inverter current, Inverter Power, Inverter Frequency, Relay Time, power generation; BUS Voltage, Air speed, Temperature, Time, Language, ID, etc. Status: Manual brake, automatic brake, fault indication, grid-connected state, relay state, Wind cut-in, etc. Monitoring mode(optional) RS485/GPRS Monitoring contents Telemetry: wind turbine speed, Inverter voltage, Inverter current, Inverter power, power generation，Air speed; Remote signal: wind turbine status, wind power grid-connected inverter over-current alarm, over-voltage alarm, over-temperature alarm, fault alarm, etc.; Remote control: modify the parameters of the wind power Efficiency ＞94% Ambient temperature -20℃～+40℃ Humidity 0%~90%, no condensing Vibration resistance Can withstand sine wave vibration with a frequency of 10Hz~50Hz and an amplitude of 0.35mm Noise ≤65dB Cooling mode Natural cooling Cover protection class IP65（dump load IP54） Product reference dimension 355*517*213 mm Product reference weight 17.3kg Dump load reference dimension 150*430*60mm Dump load reference weight 6kg Note: Part of parameters can be adjusted according to customer’s specific demand. Series 5-10KW Wind Power controller And Grid-tied Inverter WWGI Series is wind power grid-tied controller &inverter integrated machine with MPPT function. It looks concise and can be easily operated. System Diagram Applications Ø Distributed wind power grid-tied system. Ø Solar &wind hybrid power grid-tied system. Ø Wind power grid-tied system. Features Ø Wind Controller &Inverter integrated machine. Ø MPPT included, and 30-point power curve can be settable. Ø Complete protection functions. Ø RS485 monitoring mode optional. Technical Parameters Model WWGI50 WWGI100 Wind Turbine Input Rated input power 5kW 10kW Max. input power 6kW 11kW Rated input voltage 240Vac MPPT voltage range 60Vac~300Vac Rated input current 7.2A 12.0A Max input current 10.8A 18.0A Cutting speed 60RPM（factory default，0-1499RPM settable） Power tracking 30 points set power curve Speed limit control Electromagnetic speed limit Manual brake Press “Enter” and “ESC” at the same time to completely unload Tune the switch on the panel to "Brake", three-phase AC short circuit, turn to "RUN" to run. Brake by overcurrent 12A（factory default,0-15A settable）it dumps load completely when over current, and will recover after 10mins automatically 20A（factory default,0-25A settable）it dumps load completely when over current, and will recover after 10mins automatically Brake by over rotational Speed（optional） 300r/min（factory default，0~1499r/min settable）Unload completely when reached the set rotational speed, and recover automatically after 10mins. Brake by over wind speed（optional） 18m/s (0~30m/s settable), it dumps load completely when reached the set wind speed, and recover automatically after working 10mins and wind speed is less than 15m/s. AC Output Grid Type Single-phase Rated output power 5kW 10kW Max output power 5.5kW 11kW Rated Grid voltage 220Vac Grid voltage range 85%~110% of rated grid voltage Rated Grid frequency 50Hz/60Hz Work frequency range 49Hz~51Hz/59Hz~61Hz Rated output current 13.6A 22.7A Rated power factor ＞0.98 Thdi ＜5% (at rated power) DC component ＜0.5% soft start Yes Restoring grid-connected functionality Yes Auto on/off Yes Protection Functions Grid overvoltage/undervoltage protection Yes Grid over frequency/under frequency protection Yes output short circuit protection Yes Grid power failure protection Yes Anti-islanding protection Yes Over-temperature protection Yes Lightning protection Yes Residual current protection Yes General Parameters Display mode LED+LCD Display information Display: wind Voltage, Wind current，Wind power, Wind Speed, Pole Paris; Inverter voltage, Inverter current, Inverter Power, Inverter Frequency, Relay Time, power generation; BUS Voltage, Air speed, Temperature, Time, Language, ID, etc. Status: Manual brake, automatic brake, fault indication, grid-connected state, relay state, Wind cut-in, etc. Monitoring mode(optional) RS485/GPRS Monitoring contents Telemetry: wind turbine speed, Inverter voltage, Inverter current, Inverter power, power generation，Air speed; Remote signal: wind turbine status, wind power grid-connected inverter over-current alarm, over-voltage alarm, over-temperature alarm, fault alarm, etc.; Remote control: modify the parameters of the wind power Efficiency ＞95% Ambient temperature -20℃～+40℃ Humidity 0%~90%, no condensing Vibration resistance Can withstand sine wave vibration with a frequency of 10Hz~50Hz and an amplitude of 0.35mm Noise ≤65dB Cooling mode Natural cooling Cover protection class IP65（dump load IP54） Product reference dimension 416×536×250mm Product reference weight 20kg Dump load reference dimension 300×550×55mm 673×460×453mm Dump load reference weight 14kg 40kg Note: Part of parameters can be adjusted according to customer’s specific demand. Three Phase 380v Model WWGIT50 WWGIT100 Wind Turbine Input Rated input power 5kW 10kW Max. input power 5.5kW 11kW Rated input voltage 380Vac 380Vac Rated input current 4.6A 7.6A Max input current 6.9A 11.4A Cutting speed 60RPM（factory default，0-1499RPM settable） Power tracking 30 points set power curve Speed limit control Electromagnetic speed limit Manual brake Press “Enter” and “ESC” at the same time to completely unload Tune the switch on the panel to "Brake", three-phase AC short circuit, turn to "RUN" to run. Brake by overcurrent 7A（factory default,0-11A settable）it dumps load completely when over current, and will recover after 10mins automatically 11A（factory default,0-13A settable）it dumps load completely when over current, and will recover after 10mins automatically Brake by over rotational Speed（optional） 150r/min（factory default，0~1499r/min settable）Unload completely when reached the set rotational speed, and recover automatically after 10mins. Brake by over wind speed（optional） 18m/s (0~30m/s settable), it dumps load completely when reached the set wind speed, and recover automatically after working 10mins and wind speed is less than 15m/s. AC Output Grid Type Three-phase Rated output power 5kW 10kW Max output power 5.5kW 11kW Rated Grid voltage 380Vac Grid voltage range 85%~110% of rated grid voltage Rated Grid frequency 50Hz/60Hz Work frequency range 49Hz~51Hz/59Hz~61Hz Rated output current 4.6A 7.6A Rated power factor ＞0.98 Thdi ＜5% (at rated power) DC component ＜0.5% soft start Yes Restoring grid-connected functionality Yes Auto on/off Yes Protection Functions Grid overvoltage/undervoltage protection Yes Grid over frequency/under frequency protection Yes output short circuit protection Yes Grid power failure protection Yes Anti-islanding protection Yes Over-temperature protection Yes Lightning protection Yes Residual current protection Yes General Parameters Display mode LED+LCD Display information Display: wind Voltage, Wind current，Wind power, Wind Speed, Pole Paris; Inverter voltage, Inverter current, Inverter Power, Inverter Frequency, Relay Time, power generation; BUS Voltage, Air speed, Temperature, Time, Language, ID, etc. Status: Manual brake, automatic brake, fault indication, grid-connected state, relay state, Wind cut-in, etc. Monitoring mode(optional) RS485/GPRS Monitoring contents Telemetry: wind turbine speed, Inverter voltage, Inverter current, Inverter power, power generation，Air speed; Remote signal: wind turbine status, wind power grid-connected inverter over-current alarm, over-voltage alarm, over-temperature alarm, fault alarm, etc.; Remote control: modify the parameters of the wind power Efficiency ＞95% Ambient temperature -20℃～+40℃ Humidity 0%~90%, no condensing Vibration resistance Can withstand sine wave vibration with a frequency of 10Hz~50Hz and an amplitude of 0.35mm Noise ≤65dB Cooling mode Natural cooling Cover protection class IP65（dump load IP54） Product reference dimension 416×536×250mm Product reference weight 20kg Dump load reference dimension 300×550×55mm 673×460×453mm Dump load reference weight 14kg 40kg Note: Part of parameters can be adjusted according to customer’s specific demand. 1. Technical Parameters Model WWGIT200 Wind Turbine Input Rated input power 20kW Max. input power 21kW Rated input voltage 380Vac Rated input current 15.2A Max input current 22.7A Cutting speed 60RPM（factory default，0-1499RPM settable） Power tracking 30 points set power curve Speed limit control Electromagnetic speed limit Manual brake Press “Enter” and “ESC” at the same time to completely unload Tune the switch on the panel to "Brake", three-phase AC short circuit, turn to "RUN" to run. Brake by overcurrent 22A（factory default,0-26A settable）it dumps load completely when over current, and will recover after 10mins automatically Brake by over rotational Speed（optional） 150r/min（factory default，0~1499r/min settable）Unload completely when reached the set rotational speed, and recover automatically after 10mins. Brake by over wind speed（optional） 18m/s (0~30m/s settable), it dumps load completely when reached the set wind speed, and recover automatically after working 10mins and wind speed is less than 15m/s. AC Output Grid Type Three-phase Rated output power 20kW Max output power 21kW Rated Grid voltage 380Vac Grid voltage range 85%~110% of rated grid voltage Rated Grid frequency 50Hz/60Hz Work frequency range 49Hz~51Hz/59Hz~61Hz Rated output current 15.2A Rated power factor ＞0.98 Thdi ＜5% (at rated power) DC component ＜0.5% soft start Yes Restoring grid-connected functionality Yes Auto on/off Yes Protection Functions Grid overvoltage/undervoltage protection Yes Grid over frequency/under frequency protection Yes output short circuit protection Yes Grid power failure protection Yes Anti-islanding protection Yes Over-temperature protection Yes Lightning protection Yes Residual current protection Yes General Parameters Display mode LED+LCD Display information Display: wind Voltage, Wind current，Wind power, Wind Speed, Pole Paris; Inverter voltage, Inverter current, Inverter Power, Inverter Frequency, Relay Time, power generation; BUS Voltage, Air speed, Temperature, Time, Language, ID, etc. Status: Manual brake, automatic brake, fault indication, grid-connected state, relay state, Wind cut-in, etc. Monitoring mode(optional) RS485/GPRS Monitoring contents Telemetry: wind turbine speed, Inverter voltage, Inverter current, Inverter power, power generation，Air speed; Remote signal: wind turbine status, wind power grid-connected inverter over-current alarm, over-voltage alarm, over-temperature alarm, fault alarm, etc.; Remote control: modify the parameters of the wind power Efficiency ＞95% Ambient temperature -20℃～+40℃ Humidity 0%~90%, no condensing Vibration resistance Can withstand sine wave vibration with a frequency of 10Hz~50Hz and an amplitude of 0.35mm Noise ≤65dB Cooling mode Forced air cooling Cover protection class IP65（dump load IP54） Product reference dimension 490×223×658mm Product reference weight 37kg Dump load reference dimension 680×950×460mm Dump load reference weight 75kg Note: Part of parameters can be adjusted according to customer’s specific demand.

Price: 889 USD

Location: Yiwu

End Time: 2024-12-23T18:00:07.000Z

Shipping Cost: 0 USD

Product Images

2kw 3KW 5kw 10kw Wind Power controller Grid-tied Inverter single 220v three 380v

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 14 Days

Refund will be given as: Money Back

Current Output: 20-29 A

System Configuration: Grid-Tie

Power Source: Wind

Wattage: 3000w to 20kw

Current Rating: 21-30 A

Brand: Bayoung

Current Type: AC

Type: Wind Turbine Generator

Voltage: 45-90V

Features: All Daylight Conditions, Automatic Voltage Detection, Brushless Motor, Corrosion Resistant, Daylight Operation, Fixed Guyed, Flexible

Resistance Properties: Abrasion Resistant, Acid Resistant, Antimicrobial Resistant, Chemical Resistant, Childproof, Child Resistant, Corrosion Resistant, Dustproof, Dust Resistant, Fade Resistant, Fingerprint Resistant, Fire Resistant, Flame Retardant, Gasoline/Oil Resistant, Grease Resistant, Heat Resistant, Impact Resistant, Moisture Resistant