4-Foot Cross Arm Strap with Large and Standard D-Rings Pass Thru Safety ANSI

Description: WELKFORDER 4-Foot Cross Arm Straps are designed to be used as part of a personal fall arrest system(PFAS) providing the maximum security and premium mechanical property with fully passed test report performed at authoritative laboratory in accordance with ANSI Z359.18-2017 and in compliance with the requirements of OSHA 1910, OSHA 1926. Applied to Construction, Climbing, Roofing, Camping, Window cleaning, and Surveyor etc. WELKFORDER 4-Foot Cross Arm Strap should be removed from any surface contaminations such as concrete, stucco roofing material, etc., that could accelerate cutting or abrading of attached components. Welkforder Cross Arm Anchor Straps must be installed on structures capable of meeting the anchorage strength requirements of OSHA29 CFR1910.66 and 1926.502. Each of our Cross Arm Strap is Individually inspected. WELKFORDER 4-Foot Cross Arm Strap has one YOKE Large D-ring and one Standard D-ring of premium quality with Min. Breaking strength 5000lbs/23KN for pass-thru increasing versatility of length adjustment. Both D-rings are ANSI/ASSE Z359.12-2009 Compliant. WELKFORDER 4-Foot Cross Arm Strap Webbing is made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 30KN. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported. All Kit straps are inspected for tears, cuts, fraying, abrasion, discoloration, or other signs of wear and damage. WELKFORDER 4-Foot Cross Arm Straps are ANSI Z359.18-2017 and OSHA 1910, OSHA 1926 complaint. This equipment must be used by a Competent Person. Or the user must read and fully understand the limitations and proper use of the Fall protection equipment, and be properly trained by the Competent Person prior to use.

Price: 26.07 USD

Location: Clinton, New Jersey

End Time: 2024-10-06T01:38:21.000Z

Shipping Cost: 0 USD