7 Inch Capacitive Touchscreen Monitor IPS Display 1024X600 7" HDMI LCD Module fo

Description: 7 Inch Capacitive Touchscreen Monitor IPS Display 1024X600 7" HDMI LCD Module for Raspberry Pi 4B/ 3B+/A+/B/ 2B/ B+/A+/ Zero W, Support Windows 10/8.1/8 / 7 【High Resolution】7 inch IPS screen with 1024×600 hardware resolution【Widely Compatibility】Compatible with mini PC like Raspberry Pi 4 Model B/ 3B+/A+/B/ 2B/ B+/A+/ Zero WH/Zero W/Zero. When the LCD working with Raspberry Pi Zero WH/Zero W/Zero, you need to prepare additional mini HDMI adapter and USB cable【Sensitivity Touch】Supports single touch for Raspberry Pi, Raspbian, Ubuntu, Kali, Retropie and WIN10 IoT, Free drive. Supports five points touch for windows system 10 / 8.1 / 8 / 7, Free drive【Wider Viewing Angle 】The IPS screen provides 170° wide viewing angle for a great viewing experience【Backlight Adjustment 】7" Touchscreen display supports backlight control, low power consumption, increasing the lifetime of the display Introduction Ingcool 7 inch Capacitive Touch Screen LCD, IPS Display, 1024x600 resolution, HDMI interface, which supports Raspberry Pi and can also be used as a computer monitor. Development Resources http://www.ingcool.com/wiki/7DP-CAPLCD?Amazon FAQ Why the LCD doesn't work with Raspberry Pi? Download the latest version of the system image on the Raspberry Pi official website write to the TF card, Make sure the system image in TF card is burnt correctly (Please refer to the WIKI:http://www.ingcool.com/wiki/7DP-CAPLCD?Amazon) The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully. it is possible that the image was burnt incorrectly OR the TF card was in bad contact if both of the two LEDs keep on. What should I do if I connect to the PC with LCD and it cannot display normally? Please check if you connect all the cables properly, connect the touch cable first and then the HDMI cable, replug them and test it again. You may need to restart PC if the PC doesn't support hot-plug. What should I do if the display flicker? because of the low voltage problem of USB port, if you face such a problem,you can use a 5V/3A power adapter for the Raspberry Pi other than USB connection, otherwise the Pi may failed to start up. What should I do if the screen has the ghosting problem? Adjust the adjustable potentiometer on the back. After the desktop is displayed, adjust the potentiometer to the best display effect, and then leave the screen for a while and wait for the ghost to disappear (it may take several hours). Package Content 1 x7DP-CAPLCD 1 xHDMI cable 1 xHDMI to Micro HDMI Adapter 1 xUSB type A plug to micro B plug cable 1 xTrangle bracket Display Resolution Maximum 1024 x 600 Display Type LCD Total USB Ports 1 Special Feature Touchscreen Total HDMI Ports 1 Color 7DP-CAPLCD Resolution SVGA Wide Display resolution 1024x600 Model Number 7DP-CAPLCD Viewing Angle 170 Degrees Item Weight 10.6 Ounces Connectivity Technology USB, HDMI Voltage 5 Volts Cable Length 7 Inches Screen Surface Description Glossy Display Technology LCD Screen Size 7 Inches Specific Uses For Product Education, Programming Hardware Interface USB, HDMI DIMENSION_HERE . Weight: 10.6 oz Terms of Sale We can cancel the order for any reason and at any time. Make sure you provide a correct address because it will no longer be possible to change it later. If there is any problem, please avoid leaving negative feedback, we ask you to contact us immediately so we can help you promptly. We accept payments only through PayPal. You have 30 days to return at your expense. Shipping & Fees Shipping is free We only ship to the United States We try to ship as quickly as possible but we reserve days for packing times. If there were delays they could be caused by couriers and not by us. Thank you for choosing us!

Price: 90.32 USD

Location: Fox Lake, Illinois

End Time: 2024-05-16T12:16:48.000Z

Shipping Cost: 0 USD