700 Series Z-Wave plus Mesh Network Scene Controller ZEN32 White

Description: NOTE: Do NOT connect this switch to ceiling fans, motors, tube lights, or home appliancesNEUTRAL WIRE REQUIREDSPECIFICATIONS:Model Number: ZEN32Z-Wave Signal Frequency: 908.42 MHzPower: 120 VAC, 60 HzMaximum Loads: 960W Incandescent, 150W LED's and CFL'sZ-Wave Range: Up to 200 feet line of sight (signal will be affected by obstacles and walls)Dimensions: 1.16" deep, 1.75" wide, 4.1" tallOperating Temperature: 32-104° F (0-40° C)Installation and Use: Indoor onlyWill it work with my smart speaker?Smart speakers are not Z-Wave controllers so you will need a compatible Z-Wave hub to control this switch with voice.Smart speaker compatible Z-Wave hubs include:Fibaro Home Center LiteHubitatCompatible with SmartThings MAIN BUTTON: Connect a 120 V light fixture (up to 150 W for LED's) to control it via Z-Wave or use the main button for wireless control only with up to 7 button triggers available. Z-Wave hub required, sold separately. NOTE: your smart speaker is NOT a Z-Wave hub. 4 REMOTE BUTTONS: Program each button to activate scenes or other devices in your network for one-touch control of your favorite smart lighting presets. Use the buttons to enter "Away" mode on your way out or to turn off all of the lights before you go to bed with a single click. DIRECT 3-WAY SOLUTION: No add-on switch needed! Works with regular 3-way switches as long as NEUTRAL is present. Wire it just like the ZEN21/ZEN71 models. Please follow the appropriate diagram in the manual and rewire both boxes exactly as shown. Works great as a single pole switch too! Z-WAVE HUB COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to allow scene control programming. The ZEN32 Scene Controller is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized correctly by your system. NEW 700 SERIES: This product is built on the latest 700 series Z-Wave chip for better signal coverage than ever, faster communication, with S2 authenticated security and SmartStart for effortless pairing. EASY INSTALLATION: Clear diagrams and 7-day a week support included. No side tabs and just 1.1" deep to fit shallow and crowded switch boxes. NEUTRAL WIRE REQUIRED (check before buying). The device is ETL certified and conforms with North American safety standards. Backed by a 5-year .

Price: 52.94 USD

Location: Dallas, Texas

End Time: 2024-11-27T14:47:49.000Z

Shipping Cost: 0 USD