Adafruit Itsybitsy 32u4, 3V, 8MHz, for Arduino IDE, similar to Pro Micro, 3675

Description: Adafruit ItsyBitsy 32u4, 3V, 8MHz, E.g. for Arduino Ide, Pro Micro Similar, 3675The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Paradisetronic.com Your Store for DIY Electronics Adafruit ItsyBitsy 32u4, 3V, 8MHzThe Adafruit ItsyBitsy 32u4 is a small but very powerful microcontroller board. In terms of size, it is between the trinket and the feather and is ideal for compact applications where many inputs and outputs are still required.ItsyBitsy 32u4 has a dimension of approx. 3.6 cm x 1.8 cm and offers 6 power pins, 23 digital input and output pins (6 of which can be used as analog inputs). The same microcontroller is on the board as the Arduino Leonardo and offers roughly the same features as the Adafruit Feather 32u4 in a smaller design. Most of the existing Arduino sketches for Feather 32u4 can be used with the ItsyBitsy 32u4 without any problems.The board is ideal as an upgrade to the Pro Trinket 3V, as it has a more reliable bootloader and native USB support. Serial debugging is also possible via the USB interface. The Pro Trinket LiPo-Backpack can also be used without any problems to operate the board with a battery.The 3V version of the Itsy Bitsy 32u4 offers two special features. On the one hand, there is a VHigh connection on the circuit board to which the higher voltage of the battery or USB ports can be tapped, on the other hand, output 5 has a level converter that increases the signal to 5V.Product features:ATmega32u4 microcontroller in QFN housing3.3 V operating voltage with 8 MHz clock rate, 2 KB RAM and 28 KB flash memoryUSB bootloader with LED indicator, AVR109 compatible (such as the Flora, Feather 32u4, Leonardo)MicroUSB socket for power supply, for uploading sketches and debugging via serial interface3.3 V voltage regulator with 500 mA peak current, maximum input voltage of 6 V.Power supply via USB socket or via VBAT - with automatic switchingIntegrated hardware for serial interface, I2C and SPI4 x PWM pins6 x analog inputsRed LED on pin 13Reset buttonComes fully tested with USB bootloader for use with the Arduino IDE and pin headers. The pin headers can be soldered on by you if necessary.More information can be found on the Adafruit website: https://learn.adafruit.com/introducting-itsy-bitsy-32u4/ ItsyBitsy 32u4 has a dimension of approx. 3.6 cm x 1.8 cm and offers 6 power pins, 23 digital input and output pins (6 of which can be used as analog inputs). The same microcontroller is on the board as the Arduino Leonardo and offers roughly the same features as the Adafruit Feather 32u4 in a smaller design. Most of the existing Arduino sketches for Feather 32u4 can be used with the ItsyBitsy 32u4 without any problems. The board is ideal as an upgrade to the Pro Trinket 3V, as it has a more reliable bootloader and native USB support. Serial debugging is also possible via the USB interface. The Pro Trinket LiPo-Backpack can also be used without any problems to operate the board with a battery. The 3V version of the Itsy Bitsy 32u4 offers two special features. On the one hand, there is a VH Marke Adafruit EAN Nicht zutreffend Modell Adafruit ItsyBitsy 32u4 Herstellernummer 3675 Herstellungsland und -region Vereinigte Staaten Produktart ItsyBitsy

Price: 18.04 USD

Location: Berlin

End Time: 2024-11-20T19:59:43.000Z

Shipping Cost: 7.52 USD