Alpine S2-A60M 600W x 1 Car Amplifier

Description: Product highlightsmono subwoofer amplifier 330 watts RMS x 1 at 4 ohms 600 watts RMS x 1 at 2 ohms 600 watts RMS x 1 at 1 ohm variable low-pass filter (50-400 Hz, 24 dB/octave) variable bass boost (0-12 dB at 50 Hz) optional wired remote available preamp and speaker-level inputs speaker-level inputs handle up to 10V RCA adapters required for speaker-level input signal-sensing turn-on with speaker-level inputs preamp outputs wiring and hardware not included with amplifier 4-gauge power and ground leads recommended fuse rating: 30A x 2 8.66"W x 2.21"H x 8.3"D warranty: 1 year What's in the boxMono subwoofer amplifier (two 30A ATO fuses installed) 2 End caps Four 3/4" screws Four 1/4" screws 2mm Allen key Owner's manual (En/ Sp/ Fr/ Others) Alpine Verification Certificate Warranty information Power supply note On-line product registration information About this itemWritten by Crutchfield's Buck PomerantzBig bass power Alpine's Next Generation S-Series S2-A60M mono subwoofer amplifier makes it a lot easier to get great bass in your ride, delivering up to 600 watts RMS power to your sub. A variable bass boost allows you to dial in some extra kick and impact for more low-frequency enjoyment. You can even add an optional wired remote to control the level of bass from your front seat. S2-A60M power and output connections More convenient features A low-pass filter puts you in command of the frequency spectrum that reaches your sub. The amp includes preamp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.

Price: 249.95 USD

Location: Charlottesville, Virginia

End Time: 2024-08-02T04:06:24.000Z

Shipping Cost: 0 USD