Automatic gate opener remote control transmitter receiver 433.92Mhz

Description: Specifications:Item condition - NewBrand - GATE-RCFrequency - 433.92MHz.Operating voltage - 12V DC-24V DC ACCodes：Fixed / Learning / Rolling CodeTransmit distance - 50-100m in open space. Open space means no any interference. No walls, no doors, no trees or any other obstructions. Interference like garage door or brick wall can reduce remote control range significantly.1 receiver can store 200pcs of rolling code remote control433MHz Rolling code receiver1) Can learn Fixed and Rolling code 433,92Mhz remote controls separately and simultaneously !!! 2) Can learn and use most Original 433,92Mhz Fixed and Rolling code remote controls !!! ( Such as : BFT, V2 , Ditec，CAME, MOOVO, MHOUSE PUJOL, GIBIDI, DOORHAN, ATA PTX4, MARANTEC ) 3) 2 channel receiver provides you with an option to control and use 2 gate automations or alarm systems simultaneously 4) 1 relay can store 200 pcs remote control, the receiver can store 400 pcs remote control INSTALLATION:Position the receiver in a place adequately protected from atmospheric agents 1) Connect the wires coming from the power supply to the VDD+ and GND- terminals 2) Connect the wires coming from the device to the NO and CM terminals of the chosen channelwide range of uses:Garage doors, Electronic gates, Barrier gates, sliding doors, automatic doors, rolling doors, shuttersElectrical appliances/Home automation i.e. lights, Alarm system, access control systemEasy to use:Relay 1 Momentary Mode programmingPress once P1 button (the learning key P1 on the receiver board), The LED lights up for 1 second, then goes out and lights up again. At this point, press any key on the remote control, the learning code light will flash, and the learning code will be successful. Then release the remote control buttonRelay 2 Momentary Mode programmingPressing 2 times P1 button (the learning key P1 on the receiver board), The LED flashing 2 times. At this point, press any key on the remote control, the learning code light will flash, and the learning code will be successful. Then release the remote control buttonRelay 1 self-locking Mode programminPressing 3 times P1 button (the learning key P1 on the receiver board), The LED flashing 3 times. At this point, press any key on the remote control, the learning code light will flash, and the learning code will be successful. Then release the remote control buttonRelay 2 self-locking Mode programminPressing 4 times P1 button (the learning key P1 on the receiver board), The LED flashing 4 times. At this point, press any key on the remote control, the learning code light will flash, and the learning code will be successful. Then release the remote control button

Price: 26.6 USD

Location: 深圳

End Time: 2024-11-13T11:28:37.000Z

Shipping Cost: 1.99 USD