BD Loops - Exit Loop - 6' X 20' Direct Burial Performed Loops with 60' Lead

Description: BD Loops - Exit Loop - 6' X 20' Direct Burial Performed Loops with 60' Lead BD Loops - Exit Loop - 6' X 20' Direct Burial Performed Loops with 60' Lead Used for installations under concrete, asphalt, pavers, or gravel roads. The most common installation is the loop tied directly to the rebar before concrete is poured. Wire is UL 493 certified designed for a direct burial application. Unlike loops wrapped through PVC, The BD Loops Direct Burial Loop does not have an air pocket resulting in fewer repeat service calls due to phantom detections caused by ground vibration. Built with a high quality solid 14AWG wire out performing other preformed loops with twice as much copper per foot and increased tensile strength. Solid 14AWG wire also results in the direct burial loop being very ridged giving the installer the opportunity to easily set-up and layout the loop and prevents the loop from falling in-between the rebar patter. Twisted jacketed lead-in prevents “coil back” from normal twisted lead-in, preventing wasted time untangling lead-in wires. The loop wire has arrows indicating the direction of current allowing easy understanding of phasing. Each direct burial loop comes with an installation kit including easy to understand instructions, cable ties for installation on top of redbar, ground stakes for under gravel roads, and stickers for easy identification after the loops have been installed.FeatureBenefitsThicker 14-gauge loop wire, 4 times more copper than 20-gauge wire.More copper means a better performing loop and increased tensile strength.UL 493 Direct burial rated loop wire.Insurance the right product is being used for the job resulting in an immense lifespanLoops sold as a kit.Supplied instructions, ground stakes, cable ties, and loop labels.Pre-phased at the factory.Saves time and prevents confusion when installing two loops to one detector.Soldered connectionsEnsure top performance over time.Flex yoke design pre-fitted with ½ inch PVC coupler.Saves installation time and material cost.No air pocket in loop wire design.Will not float to surface during a concrete pour and also eliminates faults trips due to ground vibrations.Compact size and reduced weight.Saves on shipping cost and warehouse space. Payments & Returns Policy

Gate Openers Unlimited is Offering a large selection of GTO Gate Openers, or Mighty Mule Gate Operators for your Electric Gates. Great selection of Access Control Devices, Remote Controls, Wireless Keypads, Telephone Entry Systems, Loop Detectors, Safety Senors, Automatic Gate Opener Parts, Gate Hardware, and More.

BD Loop Preformed Direct Burial Loops

Used for installations under concrete, asphalt, pavers, or gravel roads. The most common installation is the loop tied directly to the rebar before concrete is poured. Wire is UL 493 certified designed for a direct burial application.

Unlike loops wrapped through PVC, The BD Loops Direct Burial Loop does not have an air pocket resulting in fewer repeat service calls due to phantom detections caused by ground vibration. Built with a high quality solid 14AWG wire out performing other preformed loops with twice as much copper per foot and increased tensile strength.

Solid 14AWG wire also results in the direct burial loop being very ridged giving the installer the opportunity to easily set-up and layout the loop and prevents the loop from falling in-between the rebar patter. Twisted jacketed lead-in prevents “coil back” from normal twisted lead-in, preventing wasted time untangling lead-in wires. The loop wire has arrows indicating the direction of current allowing easy understanding of phasing.

Each direct burial loop comes with an installation kit including easy to understand instructions, cable ties for installation on top of rebar, ground stakes for under gravel roads, and stickers for easy identification after the loops have been installed.

Feature	Benefits
Thicker 14-gauge loop wire, 4 times more copper than 20-gauge wire.	More copper means a better performing loop and increased tensile strength.
UL 493 Direct burial rated loop wire.	Insurance the right product is being used for the job resulting in an immense lifespan
Loops sold as a kit.	Supplied instructions, ground stakes, cable ties, and loop labels.
Pre-phased at the factory.	Saves time and prevents confusion when installing two loops to one detector.
Soldered connections	Ensure top performance over time.
Flex yoke design pre-fitted with ½ inch PVC coupler.	Saves installation time and material cost.
No air pocket in loop wire design.	Will not float to surface during a concrete pour and also eliminates faults trips due to ground vibrations.
Compact size and reduced weight.	Saves on shipping cost and warehouse space.

	GTO F310 Digital Keypad (Wireless or Wired) The GTO Digital Keypad is a multipurpose keypad that can work with other applications in addition to GTO gate openers and locks. As a wireless keypad it can be used with any gate or garage door opener and must be used in conjunction with the GTO garage door receiver kit (part # RB709). The Digital Keypad is designed to allow access to your property for friends and family, and can be easily installed as a wireless system. The F310 keypad is easy to program with up to 25 different personal identification number (PIN) codes, and with a re-programmable vacation code good for up to seven days.
	GTO FM144 Automatic Gate Lock Designed for added security in conjunction with GTO/PRO® Automatic Gate Operators. The gate lock unlocks and locks automatically when the gate opens and closes. The perfect solution for high wind conditions, and animal containment. The perfect solution for high wind conditions and added security. Recommended for gates over 8 feet long and installations where high winds are common. Stabilizes and secures the gate in the closed or open position.
	GTO PRO FM145 Pedestrain Gate Lock (BULLDOG) Designed to mount on horizontal swing “walk-thru” wood, chain link, and metal pedestrian gates opening in or out. Integrates into existing security and access control systems; card readers, keypads, telephone entry system, etc. Powder coated steel housing proven to withstand up to 3,500 lbs. (1,587.6 kg) of force.
	GTO F4100MBC Estate Series Digital Keypad / Intercom System Wireless Kit Designed for today's estate gate entrances, this access system provides added security to your automated gate with the ability to "speak to" and "screen" visitors safely from inside your home or business. With features such as a motion detecting backlit keypad, brushed aluminum faceplate, key lock access housing, 100 user codes, camera ready, ports, this unit is well designed. The rechargeable portable base station allows gate operator activation from inside the home. To further enhance your GTO/PRO system, up to three additional base stations can be added for additional access from multiple rooms or levels of the home or business. The system provides superior range with crystal clear two-way wireless communication up to 500 feet.
	GTO Gate Timer, TM-GTO-12V Timer The GTO Gate Timer 12V 7-Day Timer is used to program time periods that your gate operator will open or close. Capable of keeping your gate open for extended periods of time, saving excessive wear on the operator by eliminating the constant opening and closing of the gate. Can also lock out the use of the operator for security concerns during the evening. Timer accepts up to 10 program settings. Low voltage DC timer made to hook up to GTO operator battery without draining the battery. Easy installation instructions included.
	GTO AQ201 Receiver Assembly with Antenna GTO AQ201 Receiver Assembly with Antenna Compatible with all GTO DC gate operators and narrow band transmitters (gray style). The AQ201 comes standard with all DC swing gate operators
	GTO RB709 UNB Universal Receiver GTO RB709 UNB Universal Receiver Compatible with all GTO AC gate operators and narrow band transmitters. The RB709U-NB is recommended for all GTO AC gate operators. Measures 3-1/2"H x 2-3/8"W x 1-1/2"D, with a 11" antenna and 10' cable