Beretta Benelli Mobil extended choke tubes (black), 5-set, 12 Ga, non-ported

Description: This Billman™ Extended "Mobil" choke set (5 black choke tubes, non-ported) for 12 ga. enables the fine-tuning of your shotgun's performance in detail. When used in combination with the right ammunition, you will be prepared for any kind of clay target shooting and most bird hunting scenarios. The constriction range is suitable for sporting clays, skeet, and trap as well as international disciplines (FITASC, International Bunker, International Skeet). This is a 5 piece choke set and will not be broken up for customers wanting a single choke. It fits all 12 ga. shotguns made for the Beretta "Mobil" system (about 30 different makers and brands use this choke system). It does not fit any other caliber or choke system. If you are unsure if it fits your shotgun, please send us (sharp) pictures of your old chokes. Proofing video (copy-paste link):https://www.facebook.com/watch/?v=754058082659893 Made from high-quality 4140 steel, these choke tubes are black with color-coded ends, indicating the choke's constriction/tightness, providing you with the perfect shot every time. These choke tubes are a must-have for any shotgun enthusiast. Fits Mobil choke 12 gauge choke Systems (about 30 other shotgun models and most Turkish-made shotguns use the Mobil system from Beretta/Benelli). It will not fit shotguns made for such models as Optima, Optima HP, Optima Plus to mention a few.Constriction: Cylinder to Full Made from heat-treated ordnance 4140 steel with corrosion protection.Warranty: yes (limitations apply)Barrel/Bore: 12 gaBarrel muzzle/end screw-inPorts: NoChoke end: socket with color ringsChoke key: yesExtended: yesColor: Black steelConstrictions/inner caliber in inch diameter:C Cylinder .723IC Improved Cylinder .715M Modified .705IM Improved Modified .695F Full / .685Constriction numbers are nominal. Usually, chokes come .003-.005" smaller than listed and expand the first 25 shots towards the given constriction. All Chokes have been tested in a test barrel to meet our standards. We recommend that a gunsmith inspects the choke. Any loose color rings are fixed with thread glue and any metal shaving or dirt should be removed. These chokes have a conical-parallel design to be suitable for high-performance steel shot. The chokes are Over/Under and Side-by-Side friendly. (Chokes on pics below is for illustration on Side-by-side friendliness, not actually sold) If you were looking for our Invector chokes you find it here (copy + paste link):https://www.ebay.com/itm/296173033596 Make sure to apply a thin layer of oil or (better use grease) on the outside of the Choke and make sure to clean the chokes and their threading well to finalize a good gas seal between the choke and barrel.During shooting: Make sure to unload your shotgun and make regular inspections that the choke is firmly installed. For best performance, we recommend using standard factory-loaded shells with wad-cup (shot-cup). Common question about steel shots/pellets. The chokes are rated for steel shot (limitations apply). However, be sure your shotgun can handle steel loads. Not every shotgun is intended for steel loads. This choke is open for counter offers.Some minor scratched and tool marks may occur. Shipping: We ship via FedEx or USPS Priority Mail with tracking. We may combine shipping. Contact: Email: please use the eBay CONTACT SELLER link. We aim to answer all questions within one business day. Made in Sweden by Billman Arsenal. Billman™ authorized distributor.

Price: 129.99 USD

Location: Huntsville, Alabama

End Time: 2024-07-14T14:11:20.000Z

Shipping Cost: 10.4 USD