Beverage Air DPD67HC-2 67" Refrigerated Counter Pizza Prep Table

Description: Beverage Air DPD67HC-2 67" Refrigerated Counter Pizza Prep Table Please Contact Us With Any Questions/Concerns * Picture is for reference only and may contain options or accessories that are not included. Please contact us to make sure all features you need are included! *If you require Liftgate Delivery, please add $75 for this service. There is a $75 fee for Non-commercial Delivery as well.* Welcome To Our Listing! Beverage Air DPD67HC-2 67" Refrigerated Counter Pizza Prep Table The Beverage Air DPD67HC-2 all-purpose “raised rail,” Deli/Pizza Prep Table assures that condiments are held below 41°F and above freezing. It eliminates any chance of freezing product with lids/drawers open or closed and prevents unsanitary defrosting associated with the cold wall, and refrigerated rails. Exterior construction includes heavy-duty stainless steel finish on the front, sides, top, door(s), and grille. Insulated lid assemblies are made of matching stainless steel. The cabinet back and bottom are constructed of galvanized steel. The interior liner is made of aluminum for superior resistance to corrosion. In cabinets with doors and drawers, doors are mounted to the face of the cabinet on cartridge-style hinges permitting them to self-close under their own weight. Hinges also allow doors to stay open 120° and permit easy door removal for service and cleaning if required. A plug-in-type vinyl magnetic gasket is attached to each door for a positive seal. Cabinet insulation is CFC and HCFC-free foamed-in-place polyurethane of two-inch minimum thickness. Three-inch casters, 2 with brakes, are standard. Six-inch casters or legs are optional. The cutting board supplied with the cabinet is 19” wide and constructed of high-density white polyethylene plastic. It is readily removable for cleaning. Two epoxy-coated steel wire shelves are supplied behind each door as standard. Units will accept pans up to 6” deep. Pans are not included. The DPD67HC-2 Drawer frames are constructed of heavy-duty stainless steel. Telescoping design slides make opening drawers smooth and easy. Heavy-duty construction ensures maximum support of stored food products. Slides have a locking mechanism to prevent drawers from being pulled off of cabinets. For your convenience, drawers accommodate 6” or 4” deep pans. Heavy-duty pan divider supports are supplied. Foodservice pans for drawers are not included. Snap-type vinyl magnetic gasket is attached to each drawer for a positive seal. Drawers extend 23” (when opened). Refrigeration systems are designed using CFC and HCFC-free, environment-friendly R290 refrigerant. Optimized air circulation inside the cabinets ensures uniform temperature distribution. Slightly over and mostly under pans which are recessed approximately 3” from the top of the raised rail, and into the cabinet directly. Coils are coated for maximum corrosion protection. The innovative design utilizes an automatic condensate removal process. Features & Benefits: Stainless steel front, sides, top, door, drawers, and grille (galvanized back & bottom) Interior liner is made of corrosion-resistant aluminum Aluminum top interior liner prevents the spill from falling into cabinet Stainless steel top Removable hoods and insulated lid assemblies are made of matching stainless steel Self-closing door with 120º stay-open feature on cam-lift hinges Magnetic gaskets provide a positive seal on both door and drawers Field reversible door 3” Casters, 2 with brakes standard 19” Wide reversible cutting board is removable for easy cleaning Two (2) epoxy-coated steel wire shelves Units will accept pans up to 6” deep (pans are not included) Drawer frames are heavy-duty stainless steel 12-Gauge stainless steel drawer slides with Delrin® rollers rated at 275 lbs Telescoping slides, with locking mechanism to prevent drawers from being pulled off of cabinet Heavy-duty pan-locking divider supports are standard in drawers 3 years parts and labor warranty, 7-year compressor warranty Uses environmentally friendly, energy efficient R290 refrigerant, and meets all regulatory requirements for CARB, SNAP, DOE & more Adaptive defrost Epoxy-coated evaporator coil Enhanced airflow maintains temperatures between 36º - 38ºF Specifications Length Overall: 67" / 1702 mm Depth Overall: 38-3/8" / 975 mm Height Overall: 43-3/8" / 1102 mm Number Of Doors: 1 Number Of Drawers: 2 Drawer Extension (when opened): 23" Net Capacity (cu. ft. / liters): 27 / 765 Internal Length: 48" / 1219 mm Internal Depth: 28" / 711 mm Internal Height: 24" / 610 mm Number Of Shelves: 2 Full Load Amperers 115/60/1: 6.3 Energy Consumption: 0.23kWH Horsepwer: 1/4 Please Contact Us for a copy of the Manufacturer's Spec Sheet or Warranty Info! FREE SHIPPING to business addresses in continental U.S.! Free Shipping DOES NOT include Lift Gate OR Non-Commercial Delivery Charges. ** Most warranties are not valid if uséd at a non-commercial address ** California Residents Only WARNING: This product may contain chemicals which are known to the state of California to cause cancer, birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov Contact Us for details! (See below for full details) *** Ebay pricing IS NOT available in our store locations! Payments: Payment must be made within 5 days of the auction ending, or the item will be relisted. We accept VISA, MasterCard, American Express, Discover and Paypal. Shipping Info: Shipping Method: Freight We strive to ship everything as fast as possible. Some things will ship faster than the stated dates on eBay, but due to the continued global shipping crisis, a very few items may require the full lead time or possibly and extra week or two. We will stay in contact with you to make you aware of any delay as we get updates from our factories. Shipping to the continental 48 states only. Sorry, No APO/FPO or PO Box Delivery If you require Liftgate Delivery, please add $75 for this service. There is a $75 fee for Non-commercial Delivery as well. If you would like the freight company to call you before delivery, please add an additional $40 Save Money!! Buy multiple auctions and we will combine your shipping, which saves a great deal of money!Smaller items that are able to ship UPS Ground are not applicable to Lift Gate or Residential Delivery Fees It is your responsibility to inspect all shipments for damage BEFORE YOU SIGN for the shipment. If the item is damaged, you need to alert the shipping company immediately, and DO NOT SIGN for the item. THE BEST RULE OF THUMB WITH FREIGHT DAMAGE IS: "IF IN DOUBT, REFUSE THE SHIPMENT!" What is freight delivery? Freight delivery is required when merchandise is too large or heavy to be delivered by UPS or USPS. These items are delivered to your locations via a tractor trailer. Standard Delivery does not include unloading the merchandise or delivering it inside of your location. You are responsible for offloading the merchandise and bringing your merchandise inside of your location. Please contact us if you require special handling. What is a lift-gate? A lift-gate is a device uséd to raise and lower items from ground level to the level of a tractor trailer. Freight companies deliver items on a tractor trailer which is 56 inches above the ground. These trailers are designed to load and unload at a loading dock or with a fork-lift. If your delivery location does not have a loading dock or fork-lift and the item is too heavy to remove from the trailer by hand, then you may need a lift-gate. Do I need lift-gate delivery? There are several ways to avoid paying lift-gate delivery costs. If your delivery location has a loading dock or forklift you do not need a lift-gate. If the individual items in your shipment are light enough for you and your friends to remove from the truck you do not need a lift-gate. If you are willing to drive to the closest terminal and take terminal delivery you do not need a lift-gate. Terminal delivery is often a good way to save both lift-gate and residential delivery fees. If none of these options work for you then you will need lift-gate delivery. How much does lift-gate delivery cost? The average cost of a lift-gate is $75. Douglas Equipment ships with several different freight companies depending on the delivery location and the delivery services you request. The best way to find your actual lift-gate cost is to call us for an exact quote of your delivery costs with and without lift-gate delivery What is Residential Delivery? Residential delivery is a term and fee uséd by freight carriers to describe delivery to any address which is not zoned commercial. Usually this is a home, but it could be a church, farm community center, etc. Businesses run from a home are still considered residential. The average residential delivery fee is $75. Do I need Residential Delivery? Often you can avoid residential delivery fees by receiving your shipment at a nearby business or office building. If you have a pickup truck capable of hauling your item, we can schedule "terminal delivery" where the item is delivered to the closest trucking terminal and you receive the item there. This is a good way of saving both residential and lift-gate delivery fees. What is terminal delivery? Terminal delivery is where the freight company delivers your shipment to their closest freight terminal (usually in the closest urban area) and you receive the shipment at their terminal. Why would I use terminal delivery? By accepting your shipment at the terminal you can save residential and lift-gate delivery fees. You can also save high local delivery fees if you live in a remote or hard to reach area. How does insurance work with freight shipments? Every freight shipment is insured. But in order to collect the insurance on damaged goods the receiver MUST INSPECT THE SHIPMENT BEFORE SIGNING FOR IT! Legally, when Douglas Equipment signs the shipment over to the freight company, the freight company owns it. When you receive the item and sign for it, you own it. Therefore it is imperative that you carefully inspect your shipment for any damage. If there is any damage at all you must note the damage on the freight bill. This is the only way you will be compensated for the damage!! What should I look for when inspecting my shipment ?? A very small amount of freight shipments arrive damaged, but be sure to inspect your item when it arrives. The most common cause of damage is the fork-lift so pay special attention to holes poked in the packaging and to the bottom 18" of the shipment. Inspect the outside of the packaging to look for dents or crushed corners. If you see anything even slightly suspicious carefully remove all packaging and inspect the item. The driver may be impatient but that beats having to settle for a damaged item. Unlike FedEx or UPS, if you sign your Freight bill free of any claims then you have little recourse if you later discover that it is damaged. What if my item is damaged? You have two options. You can note damage on the freight bill and accept the item anyway, or you can refuse the shipment. 99% of freight damage is cosmetic. If you sign the freight bill damaged then the freight company will replace your item, approve reimbursement for parts and repair, or provide compensation depending on the damage to your item. This is often the best option if you need to get your item operational and the damage is cosmetic. If you refuse the shipment it will be returned to us and we will ship a replacement as soon as possible.** This may take some time due to stocking issues and transit times, but this is usually the best option if your shipment is damaged beyond repair. If you accept your shipment in a damaged state it is very important that you call the freight company immediately to schedule an inspection and file the freight claim, you should take good pictures from different angles of the item and the packaging, and you should save all packaging material. ** If the item is uséd, there will be no replacement available, so it is vitally important to have the freight company compensate you for repair. Return Policy: Returns are at the discretion of Douglas Equipment. If accepted, prior authorization must be obtained to return any equipment. Authorized returns for credit must be prepaid and be received by Douglas Equipment within 10 working days of purchase. Credit will be based on invoice price, less 25% restocking charge, and return freight charges. Refurbishing, if necessary, will be an additional charge to purchaser and will be deducted from any authorized credit. If free shipping was offered, original and return shipping charges will be deducted from refund amount. If you order a "Special Order" or "Custom" item, the restocking fee would apply as soon as the order has been placed with the factory. Taxes: Due to changing tax requirements, we are required to collect tax in many different states (please contact us to see if your state is taxable). For applicable states any taxes imposed by state governmental authorities on the sale, or use of goods referred to in this auction shall be paid by the buyer, in addition to the purchase price. If items are tax exempt for reasons of: resale, sales of Non-taxable services, Sales to Agricultural Producers, Governmental Entities, or Sales to Persons Presenting a Direct Pay Permit, a signed tax exemption must be filed. © DEQ Online, 2014 eBay integration by

Price: 7724.02 USD

Location: Bluefield, West Virginia

End Time: 2024-08-25T15:54:05.000Z

Shipping Cost: 0 USD