Callaway Jaws Raw Chrome Wedge

Description: [tab nameDescription] Jaws Raw brings raw scoring performance to your wedge game. Featuring the most aggressive grooves in golf, with a raw face that promotes maximum spin. For the first time ever, Callaway is bringing tungsten technology to a wedge, for a weight balanced club that offers both feel and control. These new technologies are balanced with the craftsmanship honed from Roger Cleveland’s 40 years of designing some of the most sought-after wedges in golf. NEW WEIGHT BALANCED DESIGN FOR ENHANCED FEEL AND IMPROVED SCORING PERFORMANCE The Pitch, Gap, Sand, and Lob Wedges have been meticulously crafted to enhance their specific performance benefits. Tungsten is in a Callaway wedge for the first time ever, on the sand and lob wedges, to center the CG position for control and feel. Variable length hosels are engineered to control trajectory while enhancing forgiveness. TOTAL SPIN MACHINE Were taking spin and control to new levels by leveraging: Razor sharp grooves to promote a controlled one hop and stop trajectory. A new raw face. We’ve removed the plating on the face which allows for rusting over time in the scoring zone, while maintaining the premium look throughout the rest of the clubhead. Offset Groove-in-Groove Technology. Positioning the milled micro-grooves at a 20° angle promotes added spin on chips, pitches and lob shots. A muted toe pad on the face reduces glare at address. VERSATILITY AND SHOT MAKING WITH 28 LOFT / BOUNCE OPTIONS PER FINISH With 6 grind options across two shapes, lofts spanning 48° to 62°, and two premium finishes, Jaws Raw delivers a full and complete wedge lineup. Along with the all-new Z grind, the comprehensive Jaws Raw lineup includes a new C grind crescent shape sole, our standard S, wide sole W, and high bounce X grind, providing 28 loft and bounce combinations per finish and shape. Legendary wedge maker Roger Cleveland has created a classic design, with a straighter leading edge and a smooth hosel connection that removes any notch near the heel. This is feedback straight from the Tour, so golfers everywhere can enjoy Tour-level wedge performance. [tab nameGrinds] C Grind: A popular grind on Tour, truly built for skilled shot makers. With toe and heel relief, the leading edge will stay low even when you open the face. Players who can maintain swing speed through the ball are able to manufacture a variety of greenside shots. J Grind: Featured only on our Full Toe wedge, J grind was developed specially for a full toe shape with more camber front to back, and toe to heel, to expose the generous bounce. This bounce features even more relief on the heel to allow players the versatility of opening the face. It’s a forgiving grind with a pre-worn leading edge and 10° of bounce. Z Grind: A tri-level sole design, with an aggressive leading-edge chamfer that acts as a skid plate for enhanced turf interaction. The chamfer also reduces digging, making this a more playable low-bounce grind. This is a versatile grind around the greens for opening the face or hitting it square. 8° bounce. S Grind: Standard medium-width sole with a slight ribbon at the back, and moderate heel relief to keep the leading-edge low through impact. A small leading-edge chamfer is employed for enhanced turf interaction. This is our most popular grind option for a wide variety of conditions and swing types. 10° bounce. X Grind: Our highest bounce option provides heel and toe relief, along with a narrow width for versatility when you open the face. A small leading-edge chamfer is added to reduce digging. The wedge is best suited to shotmakers with a steep angle of attack. 12° bounce. W Grind: Our widest sole option with a tighter front to back radius and a small leading-edge chamfer. This promotes skidding and reduces digging. This is our most forgiving sole grind. 12° of bounce. [tab nameSpecs] LOFT AVAILABILITY BOUNCE SOLE STANDARD LENGTH LIE STEEL SWING WEIGHT GRAPHITE SWING WEIGHT 48° RH ONLY 10° S-GRIND 35.75 64.0° D3 D2 50° RH / LH 10° S-GRIND 35.50 64.0° D3 D2 50° RH ONLY 12° W-GRIND 35.50 64.0° D3 D2 52° RH / LH 10° S-GRIND 35.50 64.0° D3 D2 52° RH ONLY 12° W-GRIND 35.50 64.0° D3 D2 54° RH ONLY 8° C-GRIND 35.25 64.0° D4 D3 54° RH / LH 10° S-GRIND 35.25 64.0° D4 D3 54° RH / LH 12° W-GRIND 35.25 64.0° D4 D3 54° RH ONLY 12° X-GRIND 35.25 64.0° D4 D3 56° RH ONLY 8° Z-GRIND 35.25 64.0° D4 D3 56° RH / LH 10° S-GRIND 35.25 64.0° D4 D3 56° RH ONLY 12° W-GRIND 35.25 64.0° D4 D3 56° RH ONLY 12° X-GRIND 35.25 64.0° D4 D3 58° RH / LH 8° Z-GRIND 35.00 64.0° D4 D3 58° RH ONLY 8° C-GRIND 35.00 64.0° D4 D3 58° RH / LH 10° S-GRIND 35.00 64.0° D4 D3 58° RH ONLY 12° W-GRIND 35.00 64.0° D4 D3 58° RH / LH 12° X-GRIND 35.00 64.0° D4 D3 60° RH / LH 8° Z-GRIND 35.00 64.0° D4 D3 60° RH / LH 8° C-GRIND 35.00 64.0° D4 D3 60° RH / LH 10° S-GRIND 35.00 64.0° D4 D3 60° RH ONLY 12° W-GRIND 35.00 64.0° D4 D3 60° RH ONLY 12° X-GRIND 35.00 64.0° D4 D3 62° RH ONLY 8° Z-GRIND 35.00 64.0° D4 D3 [tab nameShafts] PROJECT X CATALYST WEDGE MANUFACTURER FLEX TORQUE KICKPOINT TRUE TEMPER WEDGE MID LOW-MID TRUE TEMPER DYNAMIC GOLD SPINNER 115 STEEL MANUFACTURER FLEX SHAFT WEIGHT TORQUE KICKPOINT TRUE TEMPER S200 115 LOW MID

Price: 139.99 USD

Location: Yakima, Washington

End Time: 2024-12-22T22:59:37.000Z

Shipping Cost: 0 USD