Car Audio 6.5" Component Speakers 2-Way OnCore C65 Max 240 Watts 4 Ohm Kit

Description: RMS Power Handing: 120 Watts (each) OnCore Suggested Power Range: 50-200 Watts Frequency Response: 55 Hz - 22kHz sensitivity 1w/1m: 89dB Sensitivity 2.83volts/ 1m: 94dB Final System impedance: 4 ohms Mounting depth: 2.83”/72 mm INNOVATIVE SPEAKER DESIGN Allows you to optimize your mount options. The C-Series with its Remote Mount Tweeter System ( R.M.T.S.™ ) allows you to go from a coaxial mounting to remote mount of your tweeters, without losing performance. R.M.T.S.™ it’s not just a movable tweeter. We took great care in the design of all parts from the tweeters integrated waveguide design for high-frequency dispersion and off-axis performance to the copper sleeved T-pole for power compression control and broader frequency response MOVING PARTS ARE THAT IMPORTANT… That is why at OnCore, the design of all moving parts from the spider to the adhesive used to put the C-series together is scrutinized. Secondary and Third Harmonic distortion caused by mechanical movement is not something you dismiss or hide. From the Thin High Roll Surround ( T.H.R.S ™) with its Relief Pleat Nodes ( R.P.N™ ) and the shape of our proprietary pressed paper, cone bodies are part of the technologies used to maximize broadband performance and increase sensitivity SILK DOME TWEETERS WITH INTERNAL PHASE PLUGS OnCore utilizes 28mm high-end silk dome tweeters with a ferrofluid-cooled voice coil for a smooth, extended top-end response, along with our integrated waveguide design for better off-axis performance when mounted in a factory door location or in the A-pillar location NO ELECTRICAL TRAFFIC JAMS, JUST CLEAN MUSIC (12 dB/octave) Linkwitz-Riley alignment, are used for a smooth transition of the tweeter to mid-range. We fixed all the problems with the drivers, no complicated design FEATURES Propriety composite pulp press paper cone Propriety H.R.P. butyl rubber surround system Composite cotton / Nomex spider High-strength steel basket Screw down terminals 1” / 25 mm Silk dome tweeter R.T.M.S for tweeters (coax mode or separate mode) 12db passive crossover network 1.5” / 38 m High temp aluminum voice coil Ferrite magnet structure Copper pole sleeves for low motor distortion design PHYSICAL SPECIFICATIONS A | Overall Diameter: 6.7 in/ 169.5 mm B | Mounting Hole Diameter: 5.7 in/ 144.3 mm C | Bolt Hole Circle: 4.3 in/ 110 mm D | Magnet Diameter: 4.2 in/ 107.5 mm E | Mounting Diameter: 3.0 in/ 75.0 mm

Price: 354.04 USD

Location: Rowland Heights, California

End Time: 2024-11-19T01:59:49.000Z

Shipping Cost: 0 USD