Car Audio Component Speakers 6x9 2-Way OnCore C69 Max 240W 4 Ohm System Kit

Description: RMS Power Handing: 120 Watts (each) OnCore Suggested Power Range: 50-250 Watts Frequency Response: 55 Hz - 20kHz sensitivity 1w/1m: 90dB Sensitivity 2.83volts/ 1m: 93dB Final System impedance: 4 ohms Mounting depth: 3.54”/90 mm INNOVATIVE SPEAKER DESIGN Allows you to optimize your mount options. The C-Series with its Remote Mount Tweeter System ( R.M.T.S.™ ) allows you to go from a coaxial mounting to remote mount of your tweeters, without losing performance. R.M.T.S.™ it’s not just a movable tweeter. We took great care in the design of all parts from the tweeters integrated waveguide design for high-frequency dispersion and off-axis performance to the copper sleeved T-pole for power compression control and broader frequency response MOVING PARTS ARE THAT IMPORTANT… That is why at OnCore, the design of all moving parts from the spider to the adhesive used to put the C-series together is scrutinized. Secondary and Third Harmonic distortion caused by mechanical movement is not something you dismiss or hide. From the Thin High Roll Surround ( T.H.R.S ™) with its Relief Pleat Nodes ( R.P.N™ ) and shape of our proprietary pressed paper, cone bodies are part of the technologies used to maximize broadband performance and increase sensitivity SILK DOME TWEETERS WITH INTERNAL PHASE PLUGS OnCore utilizes 28mm high-end silk dome tweeters with a ferrofluid-cooled voice coil for a smooth, extended top-end response, along with our integrated waveguide design for better off axis performance when mounted in a factory door location or in the A-pillar location NO ELECTRICAL TRAFFIC JAMS, JUST CLEAN MUSIC (12 dB/octave) Linkwitz-Riley alignment, are used for a smooth transition of the tweeter to mid-range. We fixed all the problems with the drivers, no complicated design FEATURES Pressed paper cone with a polypropylene coating for all-weather resistance use Butyl rubber surround Composite cotton / Nomex spider High strength composite basket Screw down terminals 1” / 25 mm Silk dome tweeter 1.5” / 38 mm High temp aluminum voice coil Ferrite magnet structure 6 dB passive crossover network PHYSICAL SPECIFICATIONS A1-A2 | Overall Diameter: 9.4 in/ 240.0 mm × 6.8 in / 171.5 mm B1-B2 | Mounting Hole Diameter: 8.7in/221.4mm × 5.8in/147.3mm C1-C2 | Bolt Hole Circle: 6.7 in/169.5mm × 4.8in/123mm D | Magnet Diameter: 4.8 in / 122.5mm E | Mounting Diameter: 3.7 in/93.5mm

Price: 537.99 USD

Location: Rowland Heights, California

End Time: 2024-10-16T06:15:33.000Z

Shipping Cost: 0 USD