CDHPOWER Bicycle Gas Tank Frame 2.4L & 26" Mag Wheels Set & Motorized Bike Fork

Description: Note: If buyers' bike rear wheel is with quick release,we suggest buyers do not buy the gas frame unless buyers are professional. New GT-A with disc brake mounting ports ready on the rear end of the frame; Brake system: Disc brake and Caliper brake Gas motor with 8mm front mount bolts fits on well on the Pedestal mt of CDH gas frame! Package Include: 1pc 2.4L Gas Frame, 1 Set 26" Mag Wheels, 1pc Sprocket, 1pc Suspension Fork, 1pc Headset Requirement on seatpost:27.2mmRequired for seat post clamp:31.8mmHead tube: 150mm; Requirement on headset size: 1 1/8"; Bottom bracket 2" diameter;Rear Width: 135mm38mm diameter downtube 70 degrees angle V frame.The width and Inner Diameter (including depth of screw) of the bottom bracket : 68mmx51.5mm/2.677inx2inNote: buyers need know how to fasten the motor on the pedestal mount of gas frame to prevent crack from vibration which maybe caused crack of frame;CDHPOWER Reinforced Black bicycle gas frame Built-in 2.4L gas tank Designed for the 2-cycle engines 48cc/66cc/80cc with 40 to 50mm wide front mount stud spacingRear Disc brake bracket and front mount pedestal works well with 8mm gas motor front mount boltsFrame made especially heavy duty for gas engine applications Available with 135mm rear frame width for either single speed or multi-speed bikes.PLEASE NOTE 1: the best safe speed if racing: 35km/h；26" Mag Wheels(100x120mm) information:NOTE: It's inevitable that there will be SCRATCHES or PAINT PEELING during transportation, buy carefully if you are concerned.Before installing, please clean the metal scrap in hub firstly; Put engine oil or lubricating oil on the axle and the six screw holes to disc brake to prevent the screw from damaging! For Motorized Bikes: Mag Wheels can load Max 330lbs/150kgFor Non-Motorized Bikes: Mag Wheels can load Max 385lbs/175kgAttention: excluding 6pcs allen bolts to mag wheel (if you find 6pcs bolts of disc brake rotor on, take off and throw off for safety consider),suggest allen bolts M5x23mm. if your sprocket is thicker than standard sprocket, we suggest bolts M5x25mm. Material: MagnesiumDesigned mainly for motorized bicycles; Do not need adapter, sprocket only needed;Brake Compatibility: Disc Brake and Caliper Brake; Light and very durable. 26"/26 inch Size Wheel;Axles included; Easy intall sprocket on mag wheelRim's diameter is about 570mm, the diameter would be about 660mm after installed with tire and inner tube, that's called 26 inch wheel.Fit Flywheel with Size of thread :1.375"*24TFit Rotary Single Speed Flywheel https://www.ebay.com/itm/283979527137Put grease/lubricating oil on thread of wheel to prevent damage of thread from RidingWheels' Front and Rear Dropout: 100x120mmThe hole spacing for front disc brakes of mag wheel to be added is 44mmThe hole spacing for front and rear wheel both 44mm 26" Suspension Fork Information:Outside Diameter of Tube: 2.89cm(1.138inch), please refer to the details size picture and measure whether it is what you want before place an order, thanks! · 26" front fork: suspension with double shoulder; · disc brake(center hole to center hole: 50mm) and U caliper brake compatible; · compatible with 26"*2.325 inch tire max · Headset requirement is 1 1/8'' · Outside Diameter of Up Tube:2.89cm/1.138 inch and 38.1mm/1.5 inch for lower leg, · Suspension forks does not work well with Bicycle handle bar which fits well on out leg diameter 3.15cm to 3.18cm(1.24 inch to 1.25 inch) of triple tree fork. Note:Suspension forks does not work well with bicycle handle bar (for out leg 31.5mm-31.8mm)Rear Disc brake bracket.Frame made especially heavy duty for gas engine applications Available with 135mm rear frame width for either single speed or multi-speed bikes.Rear Disc brake bracket and front mount pedestal works well with 8mm gas motor front mount bolts .Bottom bracket 2" diameter.0.5mm thickness front mount pedestal.CDHpower Reinforced front mount pedestal.38mm diameter downtube 70 degrees angle V frame.Head tube: 150mm.Requirement on headset size:1 1/8"Sample of gas bike w/2.4L gas frame.This is how it looks like when you finish building the complete bike.Item Weight : 10.15 pounds

Price: 372.99 USD

Location: Tucson, Arizona

End Time: 2024-10-29T07:19:43.000Z

Shipping Cost: 0 USD