Circuitron ~ New 2023 ~ AR-2 Automatic Reversing Circuit With Time Delay ~ 5401

Description: Iron Planet Hobbies Circuitron AR-2 Automatic Reversing Circuit With Time Delay ~ 5401 The CIRCUITRON AR-2 is a sophisticated, integrated circuit design, automaticpolarity reverser for use on point to point layouts in any scale. The AR-2 provides 5 amp reversing capacity and also incorporates an adjustable time delay circuit that will stop a train at each reversing point for a set period of time before reversing the direction. This time delay is adjustable from 0 to over 1 minute. In addition, a terminal is provided for external activation of the time delay circuitry without reversing direction. This terminal can be connected to a panel pushbutton or to the output of one of CIRCUITRON’s detection units to permit stop and delays at any point. If a DT-4 Rolling Stock Detector is used in conjunction with the AR-2, up to 4 intermediate stopping points can be established between the reversing points. The AR-2 utilizes Opto-Sensors mounted in the track to detect the train. There are no modifications to rolling stock necessary, and the AR-2 will detect unpowered as well as powered rolling stock. The AR-2 requires a 12-18 volt AC or DC power supply for proper operation WARNINGMANY MODERN POWER PACKS HAVE ACCESSORY TERMINAL VOLTAGES THAT EXCEED 18 VOLTS, ESPECIALLY WITHOUTANY LOAD. IN ADDITION, THE VOLTAGE LISTED ON THE POWER PACK LABEL IS OFTEN-TIMES MISLEADING. WE SUGGESTTHAT YOU MEASURE THE POWER PACK OUTPUT WITH A QUALITY VOLTMETER BEFORE CONNECTING THE AR-2.EXCEEDING 18 VOLTS ON THE SUPPLY TERMINALS TO THE AR-2 WILL LIKELY CAUSE DAMAGE TO THE CIRCUIT ORRELAYS. THIS WILL VOID YOUR WARRANTY. We are an authorized Circuitron dealer.Thanks For Looking!

Price: 49.72 USD

Location: Springfield, Missouri

End Time: 2023-11-05T02:43:42.000Z

Shipping Cost: 6.82 USD