Cisco CCNA/CCNP/CCIE Practice Lab Equipment and Rack

Description: (1) ASA 5540 PID: SSM-4GE, (1) ASA 5510 SSM10 (3) ISR 1841, (1) 2801, (2) 2811, (2) 2620XM, (1) 2620, (2) 2610, (2) 3560, (2) 2950, (4) Palo Alto PA-500, (1)PIX-506E, (2) Octal Cables (4) Smart Serial DTE/DCE Back to Back cables, (4) CAB-HD60MMX-6 LFH DB60-M DB60-M CROSSOVER DTE-DCE, (20) Power Cables, 4 Post Rack w/ lockable caster's and side covers included, (6) console cables (DB9 to RJ45) 2 (USB to mini UDB) 0+ CAT 5 patch cables (1) CP-7970G Cisco Unified 7970G IP Phone 1 Palo alto is working the other (3) Palo Alto's have an issue and didn't have the time to troubleshoot. These are not included in the price at all. They are free***************************************************************************************************************CiscoASA5540W# sh ver Cisco Adaptive Security Appliance Software Version 9.1(7)29 Device Manager Version 7.9(2)152 Compiled on Mon 30-Apr-18 14:07 by buildersSystem image file is "disk0:/asa917-29-k8.bin"Config file at boot was "startup-config" CiscoASA5540W up 31 mins 13 secs Hardware: ASA5540, 2560 MB RAM, CPU Pentium 4 2000 MHz,Internal ATA Compact Flash, 256MBBIOS Flash AT49LW080 @ 0xfff00000, 1024KB Encryption hardware device : Cisco ASA-55xx on-board accelerator (revision 0x0) Boot microcode : CN1000-MC-BOOT-2.00 SSL/IKE microcode : CNlite-MC-SSLm-PLUS-2.08 IPSec microcode : CNlite-MC-IPSECm-MAIN-2.09 Number of accelerators: 1 0: Ext: GigabitEthernet0/0 : address is 0015.c695.cf18, irq 9 1: Ext: GigabitEthernet0/1 : address is 0015.c695.cf19, irq 9 2: Ext: GigabitEthernet0/2 : address is 0015.c695.cf1a, irq 9 3: Ext: GigabitEthernet0/3 : address is 0015.c695.cf1b, irq 9 4: Ext: Management0/0 : address is 0015.c695.cf17, irq 11 5: Int: Internal-Data0/0 : address is 0000.0001.0002, irq 11 6: Int: Not used : irq 5 7: Ext: GigabitEthernet1/0 : address is 0018.199e.bc06, irq 255 8: Ext: GigabitEthernet1/1 : address is 0018.199e.bc07, irq 255 9: Ext: GigabitEthernet1/2 : address is 0018.199e.bc08, irq 25510: Ext: GigabitEthernet1/3 : address is 0018.199e.bc09, irq 25511: Int: Internal-Data1/0 : address is 0000.0003.0002, irq 255 Licensed features for this platform:Maximum Physical Interfaces : Unlimited perpetualMaximum VLANs : 200 perpetualInside Hosts : Unlimited perpetualFailover : Active/Active perpetualEncryption-DES : Enabled perpetualEncryption-3DES-AES : Enabled perpetualSecurity Contexts : 50 perpetualGTP/GPRS : Disabled perpetualAnyConnect Premium Peers : 2 perpetualAnyConnect Essentials : Disabled perpetualOther VPN Peers : 5000 perpetualTotal VPN Peers : 5000 perpetualShared License : Disabled perpetualAnyConnect for Mobile : Disabled perpetualAnyConnect for Cisco VPN Phone : Disabled perpetualAdvanced Endpoint Assessment : Disabled perpetualUC Phone Proxy Sessions : 2 perpetualTotal UC Proxy Sessions : 2 perpetualBotnet Traffic Filter : Disabled perpetualIntercompany Media Engine : Disabled perpetualCluster : Disabled perpetual This platform has an ASA 5540 VPN Premium license. Serial Number: JMX1012K0M6Running Permanent Activation Key: 0x8124c448 0x24caaa52 0x24e201f4 0x8c6ca094 0x8029079a Configuration register is 0x1Configuration has not been modified since last system restart. CiscoASA5540W# sh invName: "Chassis", DESCR: "ASA 5540 Adaptive Security Appliance"PID: ASA5540 , VID: V01 , SN: JMX1012K0M6 Name: "module 1", DESCR: "Cisco 4-Port Gigabit Ethernet Module"PID: SSM-4GE , VID: V01 , SN: JAF10272412 Name: "power supply", DESCR: "ASA/IPS 180W AC Power Supply"PID: ASA-180W-PWR-AC , VID: V01 , SN: DTN111281FX********************************************************************************************CiscoASA5510E# sh ver Cisco Adaptive Security Appliance Software Version 8.2(1) Device Manager Version 6.2(1) Compiled on Tue 05-May-09 22:45 by buildersSystem image file is "disk0:/asa821-k8.bin"Config file at boot was "startup-config" CiscoASA5510E up 26 mins 38 secs Hardware: ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHzInternal ATA Compact Flash, 256MBBIOS Flash M50FW080 @ 0xffe00000, 1024KB Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0) Boot microcode : CN1000-MC-BOOT-2.00 SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03 IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04 0: Ext: Ethernet0/0 : address is 0025.84fc.ed34, irq 9 1: Ext: Ethernet0/1 : address is 0025.84fc.ed35, irq 9 2: Ext: Ethernet0/2 : address is 0025.84fc.ed36, irq 9 3: Ext: Ethernet0/3 : address is 0025.84fc.ed37, irq 9 4: Ext: Management0/0 : address is 0025.84fc.ed33, irq 11 5: Int: Internal-Data0/0 : address is 0000.0001.0002, irq 11 6: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 5 Licensed features for this platform:Maximum Physical Interfaces : Unlimited Maximum VLANs : 100 Inside Hosts : Unlimited Failover : Active/ActiveVPN-DES : Enabled VPN-3DES-AES : Enabled Security Contexts : 2 GTP/GPRS : Disabled SSL VPN Peers : 2 Total VPN Peers : 250 Shared License : DisabledAnyConnect for Mobile : Disabled AnyConnect for Linksys phone : Disabled AnyConnect Essentials : Disabled Advanced Endpoint Assessment : Disabled UC Phone Proxy Sessions : 2 Total UC Proxy Sessions : 2 Botnet Traffic Filter : Disabled This platform has an ASA 5510 Security Plus license. Serial Number: JMX1331L02VRunning Activation Key: 0x4d22f55e 0xac539c57 0xe8938954 0x97b0f8a0 0x02382080 Configuration register is 0x1 CiscoASA5510E# sh invName: "Chassis", DESCR: "ASA 5510 Adaptive Security Appliance"PID: ASA5510 , VID: V04 , SN: JMX1331L02V Name: "slot 1", DESCR: "ASA 5500 Series Security Services Module-10"PID: ASA-SSM-10 , VID: V01 , SN: JAF1326AQJP Name: "power supply", DESCR: "ASA/IPS 180W AC Power Supply"PID: ASA-180W-PWR-AC , VID: V02 , SN: DTN131381G4***************************************************************************************************************Top1841R1#sh verCisco IOS Software, 1841 Software (C1841-IPBASE-M), Version 12.4(24)T7, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2012 by Cisco Systems, Inc.Compiled Tue 28-Feb-12 10:19 by prod_rel_team ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) Top1841R1 uptime is 36 minutesSystem returned to ROM by power-onSystem image file is "flash:c1841-ipbase-mz.124-24.T7.bin" Cisco 1841 (revision 7.0) with 116736K/14336K bytes of memory.Processor board ID FTX1249Y1DV2 FastEthernet interfaces1 Serial interface2 Serial(sync/async) interfacesDRAM configuration is 64 bits wide with parity disabled.191K bytes of NVRAM.31488K bytes of ATA CompactFlash (Read/Write) Configuration register is 0x2102 Top1841R1#sh invNAME: "chassis", DESCR: "1841 chassis"PID: CISCO1841 , VID: V05 , SN: FTX1249Y1DV NAME: "WIC 0", DESCR: "WAN Interface Card - DSU/CSU T1 Fractional (V2)"PID: WIC-1DSU-T1-V2 , VID: 1.2, SN: FOC12460LVE NAME: "WIC 1", DESCR: "WAN Interface Card - Serial 2T"PID: WIC-2T= , VID: 1.0, SN: 27466509 ******************************************************************************************************************************************************************************************************************************1841R2#sh verCisco IOS Software, 1841 Software (C1841-IPBASEK9-M), Version 12.4(20)T3, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2009 by Cisco Systems, Inc.Compiled Tue 28-Apr-09 14:14 by prod_rel_team ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) 1841R2 uptime is 37 minutesSystem returned to ROM by power-onSystem image file is "flash:c1841-ipbasek9-mz.124-20.T3.bin" This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. Cisco 1841 (revision 7.0) with 116736K/14336K bytes of memory.Processor board ID FTX1134X07U2 FastEthernet interfaces1 Serial interface1 Serial(sync/async) interfaceDRAM configuration is 64 bits wide with parity disabled.191K bytes of NVRAM.31360K bytes of ATA CompactFlash (Read/Write) Configuration register is 0x2102 1841R2#sh invNAME: "chassis", DESCR: "1841 chassis"PID: CISCO1841 , VID: V05 , SN: FTX1134X07U NAME: "WIC 0", DESCR: "WAN Interface Card - DSU/CSU T1 Fractional (V2)"PID: WIC-1DSU-T1-V2 , VID: 1.2, SN: FOC11304D0F NAME: "WIC 1", DESCR: "WAN Interface Card - Serial (1T)"PID: WIC-1T= , VID: 1.0, SN: 22238318 ***********************************************Terminal1841#sh verCisco IOS Software, 1841 Software (C1841-SPSERVICESK9-M), Version 15.1(3)T, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2010 by Cisco Systems, Inc.Compiled Mon 15-Nov-10 20:29 by prod_rel_team ROM: System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1) Terminal1841 uptime is 38 minutesSystem returned to ROM by power-onSystem image file is "flash:c1841-spservicesk9-mz.151-3.T.bin"Last reload type: Normal Reload This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. Cisco 1841 (revision 6.0) with 120832K/10240K bytes of memory.Processor board ID FTX1108W06Z2 FastEthernet interfaces16 terminal linesDRAM configuration is 64 bits wide with parity disabled.191K bytes of NVRAM.62720K bytes of ATA CompactFlash (Read/Write) License Info: License UDI: -------------------------------------------------Device# PID SN-------------------------------------------------*0 CISCO1841 FTX1108W06Z Configuration register is 0x2102 Terminal1841#sh invNAME: "chassis", DESCR: "1841 chassis"PID: CISCO1841 , VID: V04 , SN: FTX1108W06Z NAME: "motherboard", DESCR: "C1841 Motherboard with 2 Fast Ethernet"PID: CISCO1841 , VID: V04 , SN: FOC11045XA0 NAME: "WIC 0", DESCR: "High Speed Wan Interface card with 16 RS232 async ports(HWIC-16A)"PID: HWIC-16A , VID: V02 , SN: FOC213561Q0****************************************************************R1-2801#sh verCisco IOS Software, 2801 Software (C2801-ADVIPSERVICESK9-M), Version 12.4(3a), RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2005 by Cisco Systems, Inc.Compiled Fri 30-Sep-05 16:25 by hqluong ROM: System Bootstrap, Version 12.3(8r)T8, RELEASE SOFTWARE (fc1) R1-2801 uptime is 43 minutesSystem returned to ROM by power-onSystem image file is "flash:c2801-advipservicesk9-mz.124-3a.bin" This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. Cisco 2801 (revision 5.0) with 235520K/26624K bytes of memory.Processor board ID FTX0945W1AQ2 FastEthernet interfaces1 Serial interface1 Serial(sync/async) interface2 Virtual Private Network (VPN) ModulesWIC T1-DSUDRAM configuration is 64 bits wide with parity disabled.191K bytes of NVRAM.62720K bytes of ATA CompactFlash (Read/Write) Configuration register is 0x2102 R1-2801#sh invNAME: "2801 chassis", DESCR: "2801 chassis, Hw Serial#: 2149870887, Hw Revision: 5.0"PID: CISCO2801 , VID: V01 , SN: FTX0945W1AQ NAME: "C2801 Motherboard with 2 Fast Ethernet", DESCR: "C2801 Motherboard with 2 Fast Ethernet"PID: CISCO2801 , VID: 5.0, SN: FTX0945W1AQ NAME: "WIC/VIC 2", DESCR: "WAN Interface Card - DSU/CSU T1 Fractional (V2)"PID: , VID: 1.1, SN: FOC090123TQ NAME: "WIC/VIC/HWIC 3", DESCR: "WAN Interface Card - Serial (1T)"PID: WIC-1T= , VID: 1.0, SN: 12951156 NAME: "Virtual Private Network (VPN) Module", DESCR: "Encryption AIM Element"PID: AIM-VPN/EPII-PLUS , VID: NA, SN: FOC093727SX***************************************************************************************************************R2800-2#sh verCisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.4(24)T6, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2011 by Cisco Systems, Inc.Compiled Tue 23-Aug-11 01:30 by prod_rel_team ROM: System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1) Router uptime is 44 minutesSystem returned to ROM by power-onSystem image file is "flash:c2800nm-adventerprisek9-mz.124-24.T6.bin" This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. Cisco 2811 (revision 53.50) with 249856K/12288K bytes of memory.Processor board ID FTX1001C1S62 FastEthernet interfaces1 Serial interface1 Virtual Private Network (VPN) ModuleDRAM configuration is 64 bits wide with parity enabled.239K bytes of non-volatile configuration memory.126976K bytes of ATA CompactFlash (Read/Write) Configuration register is 0x2141 Router#sh invNAME: "2811 chassis", DESCR: "2811 chassis"PID: CISCO2811 , VID: V02 , SN: FTX1001C1S6 NAME: "WAN Interface Card - DSU/CSU T1 Fractional (V2) on Slot 0 SubSlot 0", DESCR: "WAN Interface Card - DSU/CSU T1 Fractional (V2)"PID: WIC-1DSU-T1-V2 , VID: 1.2, SN: FOC094121WU***************************************************************************************************************R2800-3>sh verCisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.4(24)T6, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2011 by Cisco Systems, Inc.Compiled Tue 23-Aug-11 01:30 by prod_rel_team ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) Router uptime is 46 minutesSystem returned to ROM by power-onSystem image file is "flash:c2800nm-adventerprisek9-mz.124-24.T6.bin" This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. Cisco 2811 (revision 53.50) with 247808K/14336K bytes of memory.Processor board ID FTX1117A0RK2 FastEthernet interfaces1 Serial interface1 Virtual Private Network (VPN) ModuleDRAM configuration is 64 bits wide with parity enabled.239K bytes of non-volatile configuration memory.125440K bytes of ATA CompactFlash (Read/Write) Configuration register is 0x2141 R2800-3> sh invNAME: "2811 chassis", DESCR: "2811 chassis"PID: CISCO2811 , VID: V04 , SN: FTX1117A0RK NAME: "WAN Interface Card - DSU/CSU T1 Fractional (V2) on Slot 0 SubSlot 0", DESCR: "WAN Interface Card - DSU/CSU T1 Fractional (V2)"PID: WIC-1DSU-T1-V2 , VID: 1.2, SN: FOC0941222P NAME: "PVDMII DSP SIMM with one DSP on Slot 0 SubSlot 4", DESCR: "PVDMII DSP SIMM with one DSP"PID: PVDM2-16 , VID: V01 , SN: FOC11110E3F ***************************************************************************************************************R1-2620XM#sh verCisco IOS Software, C2600 Software (C2600-IPBASE-M), Version 12.4(23), RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2008 by Cisco Systems, Inc.Compiled Sat 08-Nov-08 20:53 by prod_rel_team ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1) R1-2620XM uptime is 51 minutesSystem returned to ROM by power-onSystem image file is "flash:c2600-ipbase-mz.124-23.bin" Cisco 2620XM (MPC860P) processor (revision 2.0) with 94654K/3650K bytes of memory.Processor board ID JAE08060YWWM860 processor: part number 5, mask 21 FastEthernet interface10 Low-speed serial(sync/async) interfaces32K bytes of NVRAM.32768K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 R1-2620XM#sh invNAME: "2620XM chassis", DESCR: "2620XM chassis"PID: C2620XM-1FE , VID: 2.0, SN: JAE08060YWW NAME: "WAN Interface Card - Serial 2A/S", DESCR: "WAN Interface Card - Serial 2A/S"PID: WIC-2A/S= , VID: 1.0, SN: 32681892 NAME: "Eight Port Low-Speed A/S Serial", DESCR: "Eight Port Low-Speed A/S Serial"PID: NM-8A/S= , VID: 1.0, SN: 27283686 ***************************************************************************************************************FrameRelay#sh verCisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-I-M), Version 12.3(26), RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2008 by cisco Systems, Inc.Compiled Mon 17-Mar-08 15:23 by dchih ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1) FrameRelay uptime is 58 minutesSystem returned to ROM by power-onSystem image file is "flash:c2600-i-mz.123-26.bin" cisco 2620XM (MPC860P) processor (revision 0x300) with 94208K/4096K bytes of memory.Processor board ID JAE08126V6F (2954854047)M860 processor: part number 5, mask 2Bridging software.X.25 software, Version 3.0.0.1 FastEthernet/IEEE 802.3 interface(s)1 Serial network interface(s)2 Low-speed serial(sync/async) network interface(s)32K bytes of non-volatile configuration memory.32768K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 FrameRelay#sh invNAME: "2620XM chassis", DESCR: "2620XM chassis, Hw Serial#: JAE08126V6F (2954854047), Hw Revision: 0x300"PID: , VID: 0x300, SN: JAE08126V6F (2954854047)**************************************************************************************************************R3-2620#sh verCisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-IO3-M), Version 12.3(26), RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2008 by cisco Systems, Inc.Compiled Mon 17-Mar-08 15:23 by dchih ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) R3-2620 uptime is 1 hour, 1 minuteSystem returned to ROM by power-onSystem image file is "flash:c2600-io3-mz.123-26.bin" cisco 2620 (MPC860) processor (revision 0x102) with 28672K/4096K bytes of memory.Processor board ID JAD04210FK4 (2213493411)M860 processor: part number 0, mask 49Bridging software.X.25 software, Version 3.0.0.1 FastEthernet/IEEE 802.3 interface(s)1 Serial network interface(s)2 Serial(sync/async) network interface(s)32K bytes of non-volatile configuration memory.16384K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 R3-2620#sh invNAME: "2620 chassis", DESCR: "2620 chassis, Hw Serial#: JAD04210FK4 (2213493411), Hw Revision: 0x102"PID: , VID: 0x102, SN: JAD04210FK4 (2213493411)***************************************************************************************************************R4-2610#sh verCisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-I-M), Version 12.3(26), RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2008 by cisco Systems, Inc.Compiled Mon 17-Mar-08 15:23 by dchih ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) R4-2610 uptime is 1 hour, 10 minutesSystem returned to ROM by power-onSystem image file is "flash:c2600-i-mz.123-26.bin" cisco 2610 (MPC860) processor (revision 0x203) with 28672K/4096K bytes of memory.Processor board ID JAD04220CM8 (958589688)M860 processor: part number 0, mask 49Bridging software.X.25 software, Version 3.0.0.1 Ethernet/IEEE 802.3 interface(s)2 Serial(sync/async) network interface(s)4 Low-speed serial(sync/async) network interface(s)32K bytes of non-volatile configuration memory.8192K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 R4-2610#sh invNAME: "2610 chassis", DESCR: "2610 chassis, Hw Serial#: JAD04220CM8 (958589688), Hw Revision: 0x203"PID: , VID: 0x203, SN: JAD04220CM8 (958589688)***************************************************************************************************************R5-2610#sh verCisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-I-M), Version 12.3(26), RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2008 by cisco Systems, Inc.Compiled Mon 17-Mar-08 15:23 by dchih ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) R5-2610 uptime is 1 hour, 12 minutesSystem returned to ROM by power-onSystem image file is "flash:c2600-i-mz.123-26.bin" cisco 2610 (MPC860) processor (revision 0x203) with 28672K/4096K bytes of memory.Processor board ID JAD034931R7 (1596926074)M860 processor: part number 0, mask 49Bridging software.X.25 software, Version 3.0.0.1 Ethernet/IEEE 802.3 interface(s)32K bytes of non-volatile configuration memory.8192K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 R5-2610#sh invNAME: "2610 chassis", DESCR: "2610 chassis, Hw Serial#: JAD034931R7 (1596926074), Hw Revision: 0x203"PID: , VID: 0x203, SN: JAD034931R7 (1596926074)***************************************************************3560s1#sh verCisco IOS Software, C3560 Software (C3560-IPSERVICESK9-M), Version 12.2(50)SE, RELEASE SOFTWARE (fc1)Copyright (c) 1986-2009 by Cisco Systems, Inc.Compiled Sat 28-Feb-09 03:13 by weiliuImage text-base: 0x00003000, data-base: 0x01D00000 ROM: Bootstrap program is C3560 boot loaderBOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(44)SE5, RELEASE SOFTWARE (fc1) 3560s1 uptime is 1 hour, 15 minutesSystem returned to ROM by power-onSystem image file is "flash:/c3560-ipservicesk9-mz.122-50.SE.bin" This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. cisco WS-C3560-24PS (PowerPC405) processor (revision S0) with 122880K/8184K bytes of memory.Processor board ID FDO1305X0FGLast reset from power-on1 Virtual Ethernet interface24 FastEthernet interfaces2 Gigabit Ethernet interfacesThe password-recovery mechanism is enabled. 512K bytes of flash-simulated non-volatile configuration memory.Base ethernet MAC Address : 00:24:C3:78:CC:80Motherboard assembly number : 73-9673-11Power supply part number : 341-0029-05Motherboard serial number : FDO1306046GPower supply serial number : LIT125106PHModel revision number : S0Motherboard revision number : A0Model number : WS-C3560-24PS-SSystem serial number : FDO1305X0FGTop Assembly Part Number : 800-25861-05Top Assembly Revision Number : D0Version ID : V07CLEI Code Number : COMUY10ARAHardware Board Revision Number : 0x01 Switch Ports Model SW Version SW Image ------ ----- ----- ---------- ---------- * 1 26 WS-C3560-24PS 12.2(50)SE C3560-IPSERVICESK9-M Configuration register is 0xF 3560s1#sh invNAME: "1", DESCR: "WS-C3560-24PS"PID: WS-C3560-24PS-S , VID: V07, SN: FDO1305X0FG************************************************3560s2>sh verCisco IOS Software, C3560 Software (C3560-IPSERVICESK9-M), Version 12.2(53)SE1, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2010 by Cisco Systems, Inc.Compiled Fri 12-Mar-10 16:54 by prod_rel_teamImage text-base: 0x01000000, data-base: 0x02E00000 ROM: Bootstrap program is C3560 boot loaderBOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(44)SE5, RELEASE SOFTWARE (fc1) 3560s2 uptime is 1 hour, 17 minutesSystem returned to ROM by power-onSystem image file is "flash:/c3560-ipservicesk9-mz.122-53.SE1.bin" This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. cisco WS-C3560-24PS (PowerPC405) processor (revision R0) with 131072K bytes of memory.Processor board ID FDO1232X292Last reset from power-on1 Virtual Ethernet interface24 FastEthernet interfaces2 Gigabit Ethernet interfacesThe password-recovery mechanism is enabled. 512K bytes of flash-simulated non-volatile configuration memory.Base ethernet MAC Address : 00:22:BE:AA:3B:80Motherboard assembly number : 73-9673-10Power supply part number : 341-0029-05Motherboard serial number : FDO12320G93Power supply serial number : DTN12254682Model revision number : R0Motherboard revision number : A0Model number : WS-C3560-24PS-SSystem serial number : FDO1232X292Top Assembly Part Number : 800-25861-05Top Assembly Revision Number : A0Version ID : V07CLEI Code Number : COMUY10ARAHardware Board Revision Number : 0x01 Switch Ports Model SW Version SW Image ------ ----- ----- ---------- ---------- * 1 26 WS-C3560-24PS 12.2(53)SE1 C3560-IPSERVICESK9-M Configuration register is 0xF 3560s2>sh invNAME: "1", DESCR: "WS-C3560-24PS"PID: WS-C3560-24PS-S , VID: V07 , SN: FDO1232X292 *************************************************************************************************************** 2950s1#sh verCisco Internetwork Operating System Software IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA12, RELEASE SOFTWARE (fc1)Copyright (c) 1986-2008 by cisco Systems, Inc.Compiled Tue 08-Jul-08 00:03 by amvarmaImage text-base: 0x80010000, data-base: 0x80680000 ROM: Bootstrap program is C2950 boot loader 2950s1 uptime is 40 minutesSystem returned to ROM by power-onSystem image file is "flash:/c2950-i6k2l2q4-mz.121-22.EA12.bin" This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. cisco WS-C2950T-24 (RC32300) processor (revision R0) with 19912K bytes of memory.Processor board ID FOC0918W0KXLast reset from system-resetRunning Enhanced Image24 FastEthernet/IEEE 802.3 interface(s)2 Gigabit Ethernet/IEEE 802.3 interface(s) 32K bytes of flash-simulated non-volatile configuration memory.Base ethernet MAC Address: 00:14:1C:1B:89:00Motherboard assembly number: 73-6114-10Power supply part number: 34-0965-01Motherboard serial number: FOC09171FJPPower supply serial number: DAB09146Q3FModel revision number: R0Motherboard revision number: A0Model number: WS-C2950T-24System serial number: FOC0918W0KXConfiguration register is 0xF 2950s1#sh invNAME: "2950s1", DESCR: "Cisco Catalyst c2950 switch with 24 10/100 BaseTX ports and 2 10/100/1000 BaseT ports"PID: WS-C2950T-24 , VID: R0 , SN: FOC0918W0KX***************************************************************************************************************2950s2#sh verCisco Internetwork Operating System Software IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(22)EA12, RELEASE SOFTWARE (fc1)Copyright (c) 1986-2008 by cisco Systems, Inc.Compiled Mon 07-Jul-08 23:39 by amvarmaImage text-base: 0x80010000, data-base: 0x80570000 ROM: Bootstrap program is C2950 boot loader 2950s2 uptime is 1 hour, 24 minutesSystem returned to ROM by power-onSystem image file is "flash:/c2950-i6q4l2-mz.121-22.EA12.bin" cisco WS-C2950-24 (RC32300) processor (revision S0) with 20957K bytes of memory.Processor board ID FOC1251X0R6Last reset from system-resetRunning Standard Image24 FastEthernet/IEEE 802.3 interface(s) 32K bytes of flash-simulated non-volatile configuration memory.Base ethernet MAC Address: 00:23:05:A7:D6:00Motherboard assembly number: 73-5781-14Power supply part number: 34-0965-01Motherboard serial number: FOC12511KW9Power supply serial number: DTH124520FSModel revision number: S0Motherboard revision number: B0Model number: WS-C2950-24System serial number: FOC1251X0R6Configuration register is 0xF 2950s2#sh invNAME: "2950s2", DESCR: "Cisco Catalyst c2950 switch with 24 10/100 BaseTX ports"PID: WS-C2950-24 , VID: S0 , SN: FOC1251X0R6.(2) ASA 5540 PID: SSM-4GE, (1) ASA 5510 SSM10 (3) ISR 1841, (1) 2801, (2) 2811, (2) 2620XM, (1) 2620, (2) 2610, (2) 3560, (2) 2950, (4) Palo Alto PA-500, (1)PIX-506E4 Post Rack w/ lockable caster's and side covers, (4) Smart Serial DTE/DCE Back to Back cables, (4) CAB-HD60MMX-6 LFH DB60-M DB60-M CROSSOVER DTE-DCE, (20) Power Cables ***(1) ASA 5540 has an issue/ (3) Palo Alto's have an issue and didn't have the time to troubleshoot. These are not included in the price at all. They are free***************************************************************************************************************CiscoASA5540W# sh ver Cisco Adaptive Security Appliance Software Version 9.1(7)29 Device Manager Version 7.9(2)152 Compiled on Mon 30-Apr-18 14:07 by buildersSystem image file is "disk0:/asa917-29-k8.bin"Config file at boot was "startup-config" CiscoASA5540W up 31 mins 13 secs Hardware: ASA5540, 2560 MB RAM, CPU Pentium 4 2000 MHz,Internal ATA Compact Flash, 256MBBIOS Flash AT49LW080 @ 0xfff00000, 1024KB Encryption hardware device : Cisco ASA-55xx on-board accelerator (revision 0x0) Boot microcode : CN1000-MC-BOOT-2.00 SSL/IKE microcode : CNlite-MC-SSLm-PLUS-2.08 IPSec microcode : CNlite-MC-IPSECm-MAIN-2.09 Number of accelerators: 1 0: Ext: GigabitEthernet0/0 : address is 0015.c695.cf18, irq 9 1: Ext: GigabitEthernet0/1 : address is 0015.c695.cf19, irq 9 2: Ext: GigabitEthernet0/2 : address is 0015.c695.cf1a, irq 9 3: Ext: GigabitEthernet0/3 : address is 0015.c695.cf1b, irq 9 4: Ext: Management0/0 : address is 0015.c695.cf17, irq 11 5: Int: Internal-Data0/0 : address is 0000.0001.0002, irq 11 6: Int: Not used : irq 5 7: Ext: GigabitEthernet1/0 : address is 0018.199e.bc06, irq 255 8: Ext: GigabitEthernet1/1 : address is 0018.199e.bc07, irq 255 9: Ext: GigabitEthernet1/2 : address is 0018.199e.bc08, irq 25510: Ext: GigabitEthernet1/3 : address is 0018.199e.bc09, irq 25511: Int: Internal-Data1/0 : address is 0000.0003.0002, irq 255 Licensed features for this platform:Maximum Physical Interfaces : Unlimited perpetualMaximum VLANs : 200 perpetualInside Hosts : Unlimited perpetualFailover : Active/Active perpetualEncryption-DES : Enabled perpetualEncryption-3DES-AES : Enabled perpetualSecurity Contexts : 50 perpetualGTP/GPRS : Disabled perpetualAnyConnect Premium Peers : 2 perpetualAnyConnect Essentials : Disabled perpetualOther VPN Peers : 5000 perpetualTotal VPN Peers : 5000 perpetualShared License : Disabled perpetualAnyConnect for Mobile : Disabled perpetualAnyConnect for Cisco VPN Phone : Disabled perpetualAdvanced Endpoint Assessment : Disabled perpetualUC Phone Proxy Sessions : 2 perpetualTotal UC Proxy Sessions : 2 perpetualBotnet Traffic Filter : Disabled perpetualIntercompany Media Engine : Disabled perpetualCluster : Disabled perpetual This platform has an ASA 5540 VPN Premium license. Serial Number: JMX1012K0M6Running Permanent Activation Key: 0x8124c448 0x24caaa52 0x24e201f4 0x8c6ca094 0x8029079a Configuration register is 0x1Configuration has not been modified since last system restart. CiscoASA5540W# sh invName: "Chassis", DESCR: "ASA 5540 Adaptive Security Appliance"PID: ASA5540 , VID: V01 , SN: JMX1012K0M6 Name: "module 1", DESCR: "Cisco 4-Port Gigabit Ethernet Module"PID: SSM-4GE , VID: V01 , SN: JAF10272412 Name: "power supply", DESCR: "ASA/IPS 180W AC Power Supply"PID: ASA-180W-PWR-AC , VID: V01 , SN: DTN111281FX********************************************************************************************CiscoASA5510E# sh ver Cisco Adaptive Security Appliance Software Version 8.2(1) Device Manager Version 6.2(1) Compiled on Tue 05-May-09 22:45 by buildersSystem image file is "disk0:/asa821-k8.bin"Config file at boot was "startup-config" CiscoASA5510E up 26 mins 38 secs Hardware: ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHzInternal ATA Compact Flash, 256MBBIOS Flash M50FW080 @ 0xffe00000, 1024KB Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0) Boot microcode : CN1000-MC-BOOT-2.00 SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03 IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04 0: Ext: Ethernet0/0 : address is 0025.84fc.ed34, irq 9 1: Ext: Ethernet0/1 : address is 0025.84fc.ed35, irq 9 2: Ext: Ethernet0/2 : address is 0025.84fc.ed36, irq 9 3: Ext: Ethernet0/3 : address is 0025.84fc.ed37, irq 9 4: Ext: Management0/0 : address is 0025.84fc.ed33, irq 11 5: Int: Internal-Data0/0 : address is 0000.0001.0002, irq 11 6: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 5 Licensed features for this platform:Maximum Physical Interfaces : Unlimited Maximum VLANs : 100 Inside Hosts : Unlimited Failover : Active/ActiveVPN-DES : Enabled VPN-3DES-AES : Enabled Security Contexts : 2 GTP/GPRS : Disabled SSL VPN Peers : 2 Total VPN Peers : 250 Shared License : DisabledAnyConnect for Mobile : Disabled AnyConnect for Linksys phone : Disabled AnyConnect Essentials : Disabled Advanced Endpoint Assessment : Disabled UC Phone Proxy Sessions : 2 Total UC Proxy Sessions : 2 Botnet Traffic Filter : Disabled This platform has an ASA 5510 Security Plus license. Serial Number: JMX1331L02VRunning Activation Key: 0x4d22f55e 0xac539c57 0xe8938954 0x97b0f8a0 0x02382080 Configuration register is 0x1 CiscoASA5510E# sh invName: "Chassis", DESCR: "ASA 5510 Adaptive Security Appliance"PID: ASA5510 , VID: V04 , SN: JMX1331L02V Name: "slot 1", DESCR: "ASA 5500 Series Security Services Module-10"PID: ASA-SSM-10 , VID: V01 , SN: JAF1326AQJP Name: "power supply", DESCR: "ASA/IPS 180W AC Power Supply"PID: ASA-180W-PWR-AC , VID: V02 , SN: DTN131381G4***************************************************************************************************************Top1841R1#sh verCisco IOS Software, 1841 Software (C1841-IPBASE-M), Version 12.4(24)T7, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2012 by Cisco Systems, Inc.Compiled Tue 28-Feb-12 10:19 by prod_rel_team ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) Top1841R1 uptime is 36 minutesSystem returned to ROM by power-onSystem image file is "flash:c1841-ipbase-mz.124-24.T7.bin" Cisco 1841 (revision 7.0) with 116736K/14336K bytes of memory.Processor board ID FTX1249Y1DV2 FastEthernet interfaces1 Serial interface2 Serial(sync/async) interfacesDRAM configuration is 64 bits wide with parity disabled.191K bytes of NVRAM.31488K bytes of ATA CompactFlash (Read/Write) Configuration register is 0x2102 Top1841R1#sh invNAME: "chassis", DESCR: "1841 chassis"PID: CISCO1841 , VID: V05 , SN: FTX1249Y1DV NAME: "WIC 0", DESCR: "WAN Interface Card - DSU/CSU T1 Fractional (V2)"PID: WIC-1DSU-T1-V2 , VID: 1.2, SN: FOC12460LVE NAME: "WIC 1", DESCR: "WAN Interface Card - Serial 2T"PID: WIC-2T= , VID: 1.0, SN: 27466509 ******************************************************************************************************************************************************************************************************************************1841R2#sh verCisco IOS Software, 1841 Software (C1841-IPBASEK9-M), Version 12.4(20)T3, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2009 by Cisco Systems, Inc.Compiled Tue 28-Apr-09 14:14 by prod_rel_team ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) 1841R2 uptime is 37 minutesSystem returned to ROM by power-onSystem image file is "flash:c1841-ipbasek9-mz.124-20.T3.bin" This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. Cisco 1841 (revision 7.0) with 116736K/14336K bytes of memory.Processor board ID FTX1134X07U2 FastEthernet interfaces1 Serial interface1 Serial(sync/async) interfaceDRAM configuration is 64 bits wide with parity disabled.191K bytes of NVRAM.31360K bytes of ATA CompactFlash (Read/Write) Configuration register is 0x2102 1841R2#sh invNAME: "chassis", DESCR: "1841 chassis"PID: CISCO1841 , VID: V05 , SN: FTX1134X07U NAME: "WIC 0", DESCR: "WAN Interface Card - DSU/CSU T1 Fractional (V2)"PID: WIC-1DSU-T1-V2 , VID: 1.2, SN: FOC11304D0F NAME: "WIC 1", DESCR: "WAN Interface Card - Serial (1T)"PID: WIC-1T= , VID: 1.0, SN: 22238318 ***********************************************Terminal1841#sh verCisco IOS Software, 1841 Software (C1841-SPSERVICESK9-M), Version 15.1(3)T, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2010 by Cisco Systems, Inc.Compiled Mon 15-Nov-10 20:29 by prod_rel_team ROM: System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1) Terminal1841 uptime is 38 minutesSystem returned to ROM by power-onSystem image file is "flash:c1841-spservicesk9-mz.151-3.T.bin"Last reload type: Normal Reload This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. Cisco 1841 (revision 6.0) with 120832K/10240K bytes of memory.Processor board ID FTX1108W06Z2 FastEthernet interfaces16 terminal linesDRAM configuration is 64 bits wide with parity disabled.191K bytes of NVRAM.62720K bytes of ATA CompactFlash (Read/Write) License Info: License UDI: -------------------------------------------------Device# PID SN-------------------------------------------------*0 CISCO1841 FTX1108W06Z Configuration register is 0x2102 Terminal1841#sh invNAME: "chassis", DESCR: "1841 chassis"PID: CISCO1841 , VID: V04 , SN: FTX1108W06Z NAME: "motherboard", DESCR: "C1841 Motherboard with 2 Fast Ethernet"PID: CISCO1841 , VID: V04 , SN: FOC11045XA0 NAME: "WIC 0", DESCR: "High Speed Wan Interface card with 16 RS232 async ports(HWIC-16A)"PID: HWIC-16A , VID: V02 , SN: FOC213561Q0****************************************************************R1-2801#sh verCisco IOS Software, 2801 Software (C2801-ADVIPSERVICESK9-M), Version 12.4(3a), RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2005 by Cisco Systems, Inc.Compiled Fri 30-Sep-05 16:25 by hqluong ROM: System Bootstrap, Version 12.3(8r)T8, RELEASE SOFTWARE (fc1) R1-2801 uptime is 43 minutesSystem returned to ROM by power-onSystem image file is "flash:c2801-advipservicesk9-mz.124-3a.bin" This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. Cisco 2801 (revision 5.0) with 235520K/26624K bytes of memory.Processor board ID FTX0945W1AQ2 FastEthernet interfaces1 Serial interface1 Serial(sync/async) interface2 Virtual Private Network (VPN) ModulesWIC T1-DSUDRAM configuration is 64 bits wide with parity disabled.191K bytes of NVRAM.62720K bytes of ATA CompactFlash (Read/Write) Configuration register is 0x2102 R1-2801#sh invNAME: "2801 chassis", DESCR: "2801 chassis, Hw Serial#: 2149870887, Hw Revision: 5.0"PID: CISCO2801 , VID: V01 , SN: FTX0945W1AQ NAME: "C2801 Motherboard with 2 Fast Ethernet", DESCR: "C2801 Motherboard with 2 Fast Ethernet"PID: CISCO2801 , VID: 5.0, SN: FTX0945W1AQ NAME: "WIC/VIC 2", DESCR: "WAN Interface Card - DSU/CSU T1 Fractional (V2)"PID: , VID: 1.1, SN: FOC090123TQ NAME: "WIC/VIC/HWIC 3", DESCR: "WAN Interface Card - Serial (1T)"PID: WIC-1T= , VID: 1.0, SN: 12951156 NAME: "Virtual Private Network (VPN) Module", DESCR: "Encryption AIM Element"PID: AIM-VPN/EPII-PLUS , VID: NA, SN: FOC093727SX***************************************************************************************************************R2800-2#sh verCisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.4(24)T6, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2011 by Cisco Systems, Inc.Compiled Tue 23-Aug-11 01:30 by prod_rel_team ROM: System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1) Router uptime is 44 minutesSystem returned to ROM by power-onSystem image file is "flash:c2800nm-adventerprisek9-mz.124-24.T6.bin" This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. Cisco 2811 (revision 53.50) with 249856K/12288K bytes of memory.Processor board ID FTX1001C1S62 FastEthernet interfaces1 Serial interface1 Virtual Private Network (VPN) ModuleDRAM configuration is 64 bits wide with parity enabled.239K bytes of non-volatile configuration memory.126976K bytes of ATA CompactFlash (Read/Write) Configuration register is 0x2141 Router#sh invNAME: "2811 chassis", DESCR: "2811 chassis"PID: CISCO2811 , VID: V02 , SN: FTX1001C1S6 NAME: "WAN Interface Card - DSU/CSU T1 Fractional (V2) on Slot 0 SubSlot 0", DESCR: "WAN Interface Card - DSU/CSU T1 Fractional (V2)"PID: WIC-1DSU-T1-V2 , VID: 1.2, SN: FOC094121WU***************************************************************************************************************R2800-3>sh verCisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.4(24)T6, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2011 by Cisco Systems, Inc.Compiled Tue 23-Aug-11 01:30 by prod_rel_team ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) Router uptime is 46 minutesSystem returned to ROM by power-onSystem image file is "flash:c2800nm-adventerprisek9-mz.124-24.T6.bin" This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. Cisco 2811 (revision 53.50) with 247808K/14336K bytes of memory.Processor board ID FTX1117A0RK2 FastEthernet interfaces1 Serial interface1 Virtual Private Network (VPN) ModuleDRAM configuration is 64 bits wide with parity enabled.239K bytes of non-volatile configuration memory.125440K bytes of ATA CompactFlash (Read/Write) Configuration register is 0x2141 R2800-3> sh invNAME: "2811 chassis", DESCR: "2811 chassis"PID: CISCO2811 , VID: V04 , SN: FTX1117A0RK NAME: "WAN Interface Card - DSU/CSU T1 Fractional (V2) on Slot 0 SubSlot 0", DESCR: "WAN Interface Card - DSU/CSU T1 Fractional (V2)"PID: WIC-1DSU-T1-V2 , VID: 1.2, SN: FOC0941222P NAME: "PVDMII DSP SIMM with one DSP on Slot 0 SubSlot 4", DESCR: "PVDMII DSP SIMM with one DSP"PID: PVDM2-16 , VID: V01 , SN: FOC11110E3F ***************************************************************************************************************R1-2620XM#sh verCisco IOS Software, C2600 Software (C2600-IPBASE-M), Version 12.4(23), RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2008 by Cisco Systems, Inc.Compiled Sat 08-Nov-08 20:53 by prod_rel_team ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1) R1-2620XM uptime is 51 minutesSystem returned to ROM by power-onSystem image file is "flash:c2600-ipbase-mz.124-23.bin" Cisco 2620XM (MPC860P) processor (revision 2.0) with 94654K/3650K bytes of memory.Processor board ID JAE08060YWWM860 processor: part number 5, mask 21 FastEthernet interface10 Low-speed serial(sync/async) interfaces32K bytes of NVRAM.32768K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 R1-2620XM#sh invNAME: "2620XM chassis", DESCR: "2620XM chassis"PID: C2620XM-1FE , VID: 2.0, SN: JAE08060YWW NAME: "WAN Interface Card - Serial 2A/S", DESCR: "WAN Interface Card - Serial 2A/S"PID: WIC-2A/S= , VID: 1.0, SN: 32681892 NAME: "Eight Port Low-Speed A/S Serial", DESCR: "Eight Port Low-Speed A/S Serial"PID: NM-8A/S= , VID: 1.0, SN: 27283686 ***************************************************************************************************************FrameRelay#sh verCisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-I-M), Version 12.3(26), RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2008 by cisco Systems, Inc.Compiled Mon 17-Mar-08 15:23 by dchih ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1) FrameRelay uptime is 58 minutesSystem returned to ROM by power-onSystem image file is "flash:c2600-i-mz.123-26.bin" cisco 2620XM (MPC860P) processor (revision 0x300) with 94208K/4096K bytes of memory.Processor board ID JAE08126V6F (2954854047)M860 processor: part number 5, mask 2Bridging software.X.25 software, Version 3.0.0.1 FastEthernet/IEEE 802.3 interface(s)1 Serial network interface(s)2 Low-speed serial(sync/async) network interface(s)32K bytes of non-volatile configuration memory.32768K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 FrameRelay#sh invNAME: "2620XM chassis", DESCR: "2620XM chassis, Hw Serial#: JAE08126V6F (2954854047), Hw Revision: 0x300"PID: , VID: 0x300, SN: JAE08126V6F (2954854047)**************************************************************************************************************R3-2620#sh verCisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-IO3-M), Version 12.3(26), RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2008 by cisco Systems, Inc.Compiled Mon 17-Mar-08 15:23 by dchih ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) R3-2620 uptime is 1 hour, 1 minuteSystem returned to ROM by power-onSystem image file is "flash:c2600-io3-mz.123-26.bin" cisco 2620 (MPC860) processor (revision 0x102) with 28672K/4096K bytes of memory.Processor board ID JAD04210FK4 (2213493411)M860 processor: part number 0, mask 49Bridging software.X.25 software, Version 3.0.0.1 FastEthernet/IEEE 802.3 interface(s)1 Serial network interface(s)2 Serial(sync/async) network interface(s)32K bytes of non-volatile configuration memory.16384K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 R3-2620#sh invNAME: "2620 chassis", DESCR: "2620 chassis, Hw Serial#: JAD04210FK4 (2213493411), Hw Revision: 0x102"PID: , VID: 0x102, SN: JAD04210FK4 (2213493411)***************************************************************************************************************R4-2610#sh verCisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-I-M), Version 12.3(26), RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2008 by cisco Systems, Inc.Compiled Mon 17-Mar-08 15:23 by dchih ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) R4-2610 uptime is 1 hour, 10 minutesSystem returned to ROM by power-onSystem image file is "flash:c2600-i-mz.123-26.bin" cisco 2610 (MPC860) processor (revision 0x203) with 28672K/4096K bytes of memory.Processor board ID JAD04220CM8 (958589688)M860 processor: part number 0, mask 49Bridging software.X.25 software, Version 3.0.0.1 Ethernet/IEEE 802.3 interface(s)2 Serial(sync/async) network interface(s)4 Low-speed serial(sync/async) network interface(s)32K bytes of non-volatile configuration memory.8192K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 R4-2610#sh invNAME: "2610 chassis", DESCR: "2610 chassis, Hw Serial#: JAD04220CM8 (958589688), Hw Revision: 0x203"PID: , VID: 0x203, SN: JAD04220CM8 (958589688)***************************************************************************************************************R5-2610#sh verCisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-I-M), Version 12.3(26), RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2008 by cisco Systems, Inc.Compiled Mon 17-Mar-08 15:23 by dchih ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) R5-2610 uptime is 1 hour, 12 minutesSystem returned to ROM by power-onSystem image file is "flash:c2600-i-mz.123-26.bin" cisco 2610 (MPC860) processor (revision 0x203) with 28672K/4096K bytes of memory.Processor board ID JAD034931R7 (1596926074)M860 processor: part number 0, mask 49Bridging software.X.25 software, Version 3.0.0.1 Ethernet/IEEE 802.3 interface(s)32K bytes of non-volatile configuration memory.8192K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 R5-2610#sh invNAME: "2610 chassis", DESCR: "2610 chassis, Hw Serial#: JAD034931R7 (1596926074), Hw Revision: 0x203"PID: , VID: 0x203, SN: JAD034931R7 (1596926074)***************************************************************3560s1#sh verCisco IOS Software, C3560 Software (C3560-IPSERVICESK9-M), Version 12.2(50)SE, RELEASE SOFTWARE (fc1)Copyright (c) 1986-2009 by Cisco Systems, Inc.Compiled Sat 28-Feb-09 03:13 by weiliuImage text-base: 0x00003000, data-base: 0x01D00000 ROM: Bootstrap program is C3560 boot loaderBOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(44)SE5, RELEASE SOFTWARE (fc1) 3560s1 uptime is 1 hour, 15 minutesSystem returned to ROM by power-onSystem image file is "flash:/c3560-ipservicesk9-mz.122-50.SE.bin" This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. cisco WS-C3560-24PS (PowerPC405) processor (revision S0) with 122880K/8184K bytes of memory.Processor board ID FDO1305X0FGLast reset from power-on1 Virtual Ethernet interface24 FastEthernet interfaces2 Gigabit Ethernet interfacesThe password-recovery mechanism is enabled. 512K bytes of flash-simulated non-volatile configuration memory.Base ethernet MAC Address : 00:24:C3:78:CC:80Motherboard assembly number : 73-9673-11Power supply part number : 341-0029-05Motherboard serial number : FDO1306046GPower supply serial number : LIT125106PHModel revision number : S0Motherboard revision number : A0Model number : WS-C3560-24PS-SSystem serial number : FDO1305X0FGTop Assembly Part Number : 800-25861-05Top Assembly Revision Number : D0Version ID : V07CLEI Code Number : COMUY10ARAHardware Board Revision Number : 0x01 Switch Ports Model SW Version SW Image ------ ----- ----- ---------- ---------- * 1 26 WS-C3560-24PS 12.2(50)SE C3560-IPSERVICESK9-M Configuration register is 0xF 3560s1#sh invNAME: "1", DESCR: "WS-C3560-24PS"PID: WS-C3560-24PS-S , VID: V07, SN: FDO1305X0FG************************************************3560s2>sh verCisco IOS Software, C3560 Software (C3560-IPSERVICESK9-M), Version 12.2(53)SE1, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2010 by Cisco Systems, Inc.Compiled Fri 12-Mar-10 16:54 by prod_rel_teamImage text-base: 0x01000000, data-base: 0x02E00000 ROM: Bootstrap program is C3560 boot loaderBOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(44)SE5, RELEASE SOFTWARE (fc1) 3560s2 uptime is 1 hour, 17 minutesSystem returned to ROM by power-onSystem image file is "flash:/c3560-ipservicesk9-mz.122-53.SE1.bin" This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. cisco WS-C3560-24PS (PowerPC405) processor (revision R0) with 131072K bytes of memory.Processor board ID FDO1232X292Last reset from power-on1 Virtual Ethernet interface24 FastEthernet interfaces2 Gigabit Ethernet interfacesThe password-recovery mechanism is enabled. 512K bytes of flash-simulated non-volatile configuration memory.Base ethernet MAC Address : 00:22:BE:AA:3B:80Motherboard assembly number : 73-9673-10Power supply part number : 341-0029-05Motherboard serial number : FDO12320G93Power supply serial number : DTN12254682Model revision number : R0Motherboard revision number : A0Model number : WS-C3560-24PS-SSystem serial number : FDO1232X292Top Assembly Part Number : 800-25861-05Top Assembly Revision Number : A0Version ID : V07CLEI Code Number : COMUY10ARAHardware Board Revision Number : 0x01 Switch Ports Model SW Version SW Image ------ ----- ----- ---------- ---------- * 1 26 WS-C3560-24PS 12.2(53)SE1 C3560-IPSERVICESK9-M Configuration register is 0xF 3560s2>sh invNAME: "1", DESCR: "WS-C3560-24PS"PID: WS-C3560-24PS-S , VID: V07 , SN: FDO1232X292 *************************************************************************************************************** 2950s1#sh verCisco Internetwork Operating System Software IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA12, RELEASE SOFTWARE (fc1)Copyright (c) 1986-2008 by cisco Systems, Inc.Compiled Tue 08-Jul-08 00:03 by amvarmaImage text-base: 0x80010000, data-base: 0x80680000 ROM: Bootstrap program is C2950 boot loader 2950s1 uptime is 40 minutesSystem returned to ROM by power-onSystem image file is "flash:/c2950-i6k2l2q4-mz.121-22.EA12.bin" This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. cisco WS-C2950T-24 (RC32300) processor (revision R0) with 19912K bytes of memory.Processor board ID FOC0918W0KXLast reset from system-resetRunning Enhanced Image24 FastEthernet/IEEE 802.3 interface(s)2 Gigabit Ethernet/IEEE 802.3 interface(s) 32K bytes of flash-simulated non-volatile configuration memory.Base ethernet MAC Address: 00:14:1C:1B:89:00Motherboard assembly number: 73-6114-10Power supply part number: 34-0965-01Motherboard serial number: FOC09171FJPPower supply serial number: DAB09146Q3FModel revision number: R0Motherboard revision number: A0Model number: WS-C2950T-24System serial number: FOC0918W0KXConfiguration register is 0xF 2950s1#sh invNAME: "2950s1", DESCR: "Cisco Catalyst c2950 switch with 24 10/100 BaseTX ports and 2 10/100/1000 BaseT ports"PID: WS-C2950T-24 , VID: R0 , SN: FOC0918W0KX***************************************************************************************************************2950s2#sh verCisco Internetwork Operating System Software IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(22)EA12, RELEASE SOFTWARE (fc1)Copyright (c) 1986-2008 by cisco Systems, Inc.Compiled Mon 07-Jul-08 23:39 by amvarmaImage text-base: 0x80010000, data-base: 0x80570000 ROM: Bootstrap program is C2950 boot loader 2950s2 uptime is 1 hour, 24 minutesSystem returned to ROM by power-onSystem image file is "flash:/c2950-i6q4l2-mz.121-22.EA12.bin" cisco WS-C2950-24 (RC32300) processor (revision S0) with 20957K bytes of memory.Processor board ID FOC1251X0R6Last reset from system-resetRunning Standard Image24 FastEthernet/IEEE 802.3 interface(s) 32K bytes of flash-simulated non-volatile configuration memory.Base ethernet MAC Address: 00:23:05:A7:D6:00Motherboard assembly number: 73-5781-14Power supply part number: 34-0965-01Motherboard serial number: FOC12511KW9(2) ASA 5540 PID: SSM-4GE, (1) ASA 5510 SSM10 (3) ISR 1841, (1) 2801, (2) 2811, (2) 2620XM, (1) 2620, (2) 2610, (2) 3560, (2) 2950, (4) Palo Alto PA-500, (1)PIX-506E4 Post Rack w/ lockable caster's and side covers, (4) Smart Serial DTE/DCE Back to Back cables, (4) CAB-HD60MMX-6 LFH DB60-M DB60-M CROSSOVER DTE-DCE, (20) Power Cables ***(1) ASA 5540 has an issue/ (3) Palo Alto's have an issue and didn't have the time to troubleshoot. These are not included in the price at all. They are free***************************************************************************************************************CiscoASA5540W# sh ver Cisco Adaptive Security Appliance Software Version 9.1(7)29 Device Manager Version 7.9(2)152 Compiled on Mon 30-Apr-18 14:07 by buildersSystem image file is "disk0:/asa917-29-k8.bin"Config file at boot was "startup-config" CiscoASA5540W up 31 mins 13 secs Hardware: ASA5540, 2560 MB RAM, CPU Pentium 4 2000 MHz,Internal ATA Compact Flash, 256MBBIOS Flash AT49LW080 @ 0xfff00000, 1024KB Encryption hardware device : Cisco ASA-55xx on-board accelerator (revision 0x0) Boot microcode : CN1000-MC-BOOT-2.00 SSL/IKE microcode : CNlite-MC-SSLm-PLUS-2.08 IPSec microcode : CNlite-MC-IPSECm-MAIN-2.09 Number of accelerators: 1 0: Ext: GigabitEthernet0/0 : address is 0015.c695.cf18, irq 9 1: Ext: GigabitEthernet0/1 : address is 0015.c695.cf19, irq 9 2: Ext: GigabitEthernet0/2 : address is 0015.c695.cf1a, irq 9 3: Ext: GigabitEthernet0/3 : address is 0015.c695.cf1b, irq 9 4: Ext: Management0/0 : address is 0015.c695.cf17, irq 11 5: Int: Internal-Data0/0 : address is 0000.0001.0002, irq 11 6: Int: Not used : irq 5 7: Ext: GigabitEthernet1/0 : address is 0018.199e.bc06, irq 255 8: Ext: GigabitEthernet1/1 : address is 0018.199e.bc07, irq 255 9: Ext: GigabitEthernet1/2 : address is 0018.199e.bc08, irq 25510: Ext: GigabitEthernet1/3 : address is 0018.199e.bc09, irq 25511: Int: Internal-Data1/0 : address is 0000.0003.0002, irq 255 Licensed features for this platform:Maximum Physical Interfaces : Unlimited perpetualMaximum VLANs : 200 perpetualInside Hosts : Unlimited perpetualFailover : Active/Active perpetualEncryption-DES : Enabled perpetualEncryption-3DES-AES : Enabled perpetualSecurity Contexts : 50 perpetualGTP/GPRS : Disabled perpetualAnyConnect Premium Peers : 2 perpetualAnyConnect Essentials : Disabled perpetualOther VPN Peers : 5000 perpetualTotal VPN Peers : 5000 perpetualShared License : Disabled perpetualAnyConnect for Mobile : Disabled perpetualAnyConnect for Cisco VPN Phone : Disabled perpetualAdvanced Endpoint Assessment : Disabled perpetualUC Phone Proxy Sessions : 2 perpetualTotal UC Proxy Sessions : 2 perpetualBotnet Traffic Filter : Disabled perpetualIntercompany Media Engine : Disabled perpetualCluster : Disabled perpetual This platform has an ASA 5540 VPN Premium license. Serial Number: JMX1012K0M6Running Permanent Activation Key: 0x8124c448 0x24caaa52 0x24e201f4 0x8c6ca094 0x8029079a Configuration register is 0x1Configuration has not been modified since last system restart. CiscoASA5540W# sh invName: "Chassis", DESCR: "ASA 5540 Adaptive Security Appliance"PID: ASA5540 , VID: V01 , SN: JMX1012K0M6 Name: "module 1", DESCR: "Cisco 4-Port Gigabit Ethernet Module"PID: SSM-4GE , VID: V01 , SN: JAF10272412 Name: "power supply", DESCR: "ASA/IPS 180W AC Power Supply"PID: ASA-180W-PWR-AC , VID: V01 , SN: DTN111281FX********************************************************************************************CiscoASA5510E# sh ver Cisco Adaptive Security Appliance Software Version 8.2(1) Device Manager Version 6.2(1) Compiled on Tue 05-May-09 22:45 by buildersSystem image file is "disk0:/asa821-k8.bin"Config file at boot was "startup-config" CiscoASA5510E up 26 mins 38 secs Hardware: ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHzInternal ATA Compact Flash, 256MBBIOS Flash M50FW080 @ 0xffe00000, 1024KB Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0) Boot microcode : CN1000-MC-BOOT-2.00 SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03 IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04 0: Ext: Ethernet0/0 : address is 0025.84fc.ed34, irq 9 1: Ext: Ethernet0/1 : address is 0025.84fc.ed35, irq 9 2: Ext: Ethernet0/2 : address is 0025.84fc.ed36, irq 9 3: Ext: Ethernet0/3 : address is 0025.84fc.ed37, irq 9 4: Ext: Management0/0 : address is 0025.84fc.ed33, irq 11 5: Int: Internal-Data0/0 : address is 0000.0001.0002, irq 11 6: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 5 Licensed features for this platform:Maximum Physical Interfaces : Unlimited Maximum VLANs : 100 Inside Hosts : Unlimited Failover : Active/ActiveVPN-DES : Enabled VPN-3DES-AES : Enabled Security Contexts : 2 GTP/GPRS : Disabled SSL VPN Peers : 2 Total VPN Peers : 250 Shared License : DisabledAnyConnect for Mobile : Disabled AnyConnect for Linksys phone : Disabled AnyConnect Essentials : Disabled Advanced Endpoint Assessment : Disabled UC Phone Proxy Sessions : 2 Total UC Proxy Sessions : 2 Botnet Traffic Filter : Disabled This platform has an ASA 5510 Security Plus license. Serial Number: JMX1331L02VRunning Activation Key: 0x4d22f55e 0xac539c57 0xe8938954 0x97b0f8a0 0x02382080 Configuration register is 0x1 CiscoASA5510E# sh invName: "Chassis", DESCR: "ASA 5510 Adaptive Security Appliance"PID: ASA5510 , VID: V04 , SN: JMX1331L02V Name: "slot 1", DESCR: "ASA 5500 Series Security Services Module-10"PID: ASA-SSM-10 , VID: V01 , SN: JAF1326AQJP Name: "power supply", DESCR: "ASA/IPS 180W AC Power Supply"PID: ASA-180W-PWR-AC , VID: V02 , SN: DTN131381G4***************************************************************************************************************Top1841R1#sh verCisco IOS Software, 1841 Software (C1841-IPBASE-M), Version 12.4(24)T7, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2012 by Cisco Systems, Inc.Compiled Tue 28-Feb-12 10:19 by prod_rel_team ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) Top1841R1 uptime is 36 minutesSystem returned to ROM by power-onSystem image file is "flash:c1841-ipbase-mz.124-24.T7.bin" Cisco 1841 (revision 7.0) with 116736K/14336K bytes of memory.Processor board ID FTX1249Y1DV2 FastEthernet interfaces1 Serial interface2 Serial(sync/async) interfacesDRAM configuration is 64 bits wide with parity disabled.191K bytes of NVRAM.31488K bytes of ATA CompactFlash (Read/Write) Configuration register is 0x2102 Top1841R1#sh invNAME: "chassis", DESCR: "1841 chassis"PID: CISCO1841 , VID: V05 , SN: FTX1249Y1DV NAME: "WIC 0", DESCR: "WAN Interface Card - DSU/CSU T1 Fractional (V2)"PID: WIC-1DSU-T1-V2 , VID: 1.2, SN: FOC12460LVE NAME: "WIC 1", DESCR: "WAN Interface Card - Serial 2T"PID: WIC-2T= , VID: 1.0, SN: 27466509 ******************************************************************************************************************************************************************************************************************************1841R2#sh verCisco IOS Software, 1841 Software (C1841-IPBASEK9-M), Version 12.4(20)T3, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2009 by Cisco Systems, Inc.Compiled Tue 28-Apr-09 14:14 by prod_rel_team ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) 1841R2 uptime is 37 minutesSystem returned to ROM by power-onSystem image file is "flash:c1841-ipbasek9-mz.124-20.T3.bin" This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. Cisco 1841 (revision 7.0) with 116736K/14336K bytes of memory.Processor board ID FTX1134X07U2 FastEthernet interfaces1 Serial interface1 Serial(sync/async) interfaceDRAM configuration is 64 bits wide with parity disabled.191K bytes of NVRAM.31360K bytes of ATA CompactFlash (Read/Write) Configuration register is 0x2102 1841R2#sh invNAME: "chassis", DESCR: "1841 chassis"PID: CISCO1841 , VID: V05 , SN: FTX1134X07U NAME: "WIC 0", DESCR: "WAN Interface Card - DSU/CSU T1 Fractional (V2)"PID: WIC-1DSU-T1-V2 , VID: 1.2, SN: FOC11304D0F NAME: "WIC 1", DESCR: "WAN Interface Card - Serial (1T)"PID: WIC-1T= , VID: 1.0, SN: 22238318 ***********************************************Terminal1841#sh verCisco IOS Software, 1841 Software (C1841-SPSERVICESK9-M), Version 15.1(3)T, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2010 by Cisco Systems, Inc.Compiled Mon 15-Nov-10 20:29 by prod_rel_team ROM: System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1) Terminal1841 uptime is 38 minutesSystem returned to ROM by power-onSystem image file is "flash:c1841-spservicesk9-mz.151-3.T.bin"Last reload type: Normal Reload This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. Cisco 1841 (revision 6.0) with 120832K/10240K bytes of memory.Processor board ID FTX1108W06Z2 FastEthernet interfaces16 terminal linesDRAM configuration is 64 bits wide with parity disabled.191K bytes of NVRAM.62720K bytes of ATA CompactFlash (Read/Write) License Info: License UDI: -------------------------------------------------Device# PID SN-------------------------------------------------*0 CISCO1841 FTX1108W06Z Configuration register is 0x2102 Terminal1841#sh invNAME: "chassis", DESCR: "1841 chassis"PID: CISCO1841 , VID: V04 , SN: FTX1108W06Z NAME: "motherboard", DESCR: "C1841 Motherboard with 2 Fast Ethernet"PID: CISCO1841 , VID: V04 , SN: FOC11045XA0 NAME: "WIC 0", DESCR: "High Speed Wan Interface card with 16 RS232 async ports(HWIC-16A)"PID: HWIC-16A , VID: V02 , SN: FOC213561Q0****************************************************************R1-2801#sh verCisco IOS Software, 2801 Software (C2801-ADVIPSERVICESK9-M), Version 12.4(3a), RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2005 by Cisco Systems, Inc.Compiled Fri 30-Sep-05 16:25 by hqluong ROM: System Bootstrap, Version 12.3(8r)T8, RELEASE SOFTWARE (fc1) R1-2801 uptime is 43 minutesSystem returned to ROM by power-onSystem image file is "flash:c2801-advipservicesk9-mz.124-3a.bin" This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. Cisco 2801 (revision 5.0) with 235520K/26624K bytes of memory.Processor board ID FTX0945W1AQ2 FastEthernet interfaces1 Serial interface1 Serial(sync/async) interface2 Virtual Private Network (VPN) ModulesWIC T1-DSUDRAM configuration is 64 bits wide with parity disabled.191K bytes of NVRAM.62720K bytes of ATA CompactFlash (Read/Write) Configuration register is 0x2102 R1-2801#sh invNAME: "2801 chassis", DESCR: "2801 chassis, Hw Serial#: 2149870887, Hw Revision: 5.0"PID: CISCO2801 , VID: V01 , SN: FTX0945W1AQ NAME: "C2801 Motherboard with 2 Fast Ethernet", DESCR: "C2801 Motherboard with 2 Fast Ethernet"PID: CISCO2801 , VID: 5.0, SN: FTX0945W1AQ NAME: "WIC/VIC 2", DESCR: "WAN Interface Card - DSU/CSU T1 Fractional (V2)"PID: , VID: 1.1, SN: FOC090123TQ NAME: "WIC/VIC/HWIC 3", DESCR: "WAN Interface Card - Serial (1T)"PID: WIC-1T= , VID: 1.0, SN: 12951156 NAME: "Virtual Private Network (VPN) Module", DESCR: "Encryption AIM Element"PID: AIM-VPN/EPII-PLUS , VID: NA, SN: FOC093727SX***************************************************************************************************************R2800-2#sh verCisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.4(24)T6, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2011 by Cisco Systems, Inc.Compiled Tue 23-Aug-11 01:30 by prod_rel_team ROM: System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1) Router uptime is 44 minutesSystem returned to ROM by power-onSystem image file is "flash:c2800nm-adventerprisek9-mz.124-24.T6.bin" This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. Cisco 2811 (revision 53.50) with 249856K/12288K bytes of memory.Processor board ID FTX1001C1S62 FastEthernet interfaces1 Serial interface1 Virtual Private Network (VPN) ModuleDRAM configuration is 64 bits wide with parity enabled.239K bytes of non-volatile configuration memory.126976K bytes of ATA CompactFlash (Read/Write) Configuration register is 0x2141 Router#sh invNAME: "2811 chassis", DESCR: "2811 chassis"PID: CISCO2811 , VID: V02 , SN: FTX1001C1S6 NAME: "WAN Interface Card - DSU/CSU T1 Fractional (V2) on Slot 0 SubSlot 0", DESCR: "WAN Interface Card - DSU/CSU T1 Fractional (V2)"PID: WIC-1DSU-T1-V2 , VID: 1.2, SN: FOC094121WU***************************************************************************************************************R2800-3>sh verCisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.4(24)T6, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2011 by Cisco Systems, Inc.Compiled Tue 23-Aug-11 01:30 by prod_rel_team ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) Router uptime is 46 minutesSystem returned to ROM by power-onSystem image file is "flash:c2800nm-adventerprisek9-mz.124-24.T6.bin" This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. Cisco 2811 (revision 53.50) with 247808K/14336K bytes of memory.Processor board ID FTX1117A0RK2 FastEthernet interfaces1 Serial interface1 Virtual Private Network (VPN) ModuleDRAM configuration is 64 bits wide with parity enabled.239K bytes of non-volatile configuration memory.125440K bytes of ATA CompactFlash (Read/Write) Configuration register is 0x2141 R2800-3> sh invNAME: "2811 chassis", DESCR: "2811 chassis"PID: CISCO2811 , VID: V04 , SN: FTX1117A0RK NAME: "WAN Interface Card - DSU/CSU T1 Fractional (V2) on Slot 0 SubSlot 0", DESCR: "WAN Interface Card - DSU/CSU T1 Fractional (V2)"PID: WIC-1DSU-T1-V2 , VID: 1.2, SN: FOC0941222P NAME: "PVDMII DSP SIMM with one DSP on Slot 0 SubSlot 4", DESCR: "PVDMII DSP SIMM with one DSP"PID: PVDM2-16 , VID: V01 , SN: FOC11110E3F ***************************************************************************************************************R1-2620XM#sh verCisco IOS Software, C2600 Software (C2600-IPBASE-M), Version 12.4(23), RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2008 by Cisco Systems, Inc.Compiled Sat 08-Nov-08 20:53 by prod_rel_team ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1) R1-2620XM uptime is 51 minutesSystem returned to ROM by power-onSystem image file is "flash:c2600-ipbase-mz.124-23.bin" Cisco 2620XM (MPC860P) processor (revision 2.0) with 94654K/3650K bytes of memory.Processor board ID JAE08060YWWM860 processor: part number 5, mask 21 FastEthernet interface10 Low-speed serial(sync/async) interfaces32K bytes of NVRAM.32768K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 R1-2620XM#sh invNAME: "2620XM chassis", DESCR: "2620XM chassis"PID: C2620XM-1FE , VID: 2.0, SN: JAE08060YWW NAME: "WAN Interface Card - Serial 2A/S", DESCR: "WAN Interface Card - Serial 2A/S"PID: WIC-2A/S= , VID: 1.0, SN: 32681892 NAME: "Eight Port Low-Speed A/S Serial", DESCR: "Eight Port Low-Speed A/S Serial"PID: NM-8A/S= , VID: 1.0, SN: 27283686 ***************************************************************************************************************FrameRelay#sh verCisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-I-M), Version 12.3(26), RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2008 by cisco Systems, Inc.Compiled Mon 17-Mar-08 15:23 by dchih ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1) FrameRelay uptime is 58 minutesSystem returned to ROM by power-onSystem image file is "flash:c2600-i-mz.123-26.bin" cisco 2620XM (MPC860P) processor (revision 0x300) with 94208K/4096K bytes of memory.Processor board ID JAE08126V6F (2954854047)M860 processor: part number 5, mask 2Bridging software.X.25 software, Version 3.0.0.1 FastEthernet/IEEE 802.3 interface(s)1 Serial network interface(s)2 Low-speed serial(sync/async) network interface(s)32K bytes of non-volatile configuration memory.32768K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 FrameRelay#sh invNAME: "2620XM chassis", DESCR: "2620XM chassis, Hw Serial#: JAE08126V6F (2954854047), Hw Revision: 0x300"PID: , VID: 0x300, SN: JAE08126V6F (2954854047)**************************************************************************************************************R3-2620#sh verCisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-IO3-M), Version 12.3(26), RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2008 by cisco Systems, Inc.Compiled Mon 17-Mar-08 15:23 by dchih ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) R3-2620 uptime is 1 hour, 1 minuteSystem returned to ROM by power-onSystem image file is "flash:c2600-io3-mz.123-26.bin" cisco 2620 (MPC860) processor (revision 0x102) with 28672K/4096K bytes of memory.Processor board ID JAD04210FK4 (2213493411)M860 processor: part number 0, mask 49Bridging software.X.25 software, Version 3.0.0.1 FastEthernet/IEEE 802.3 interface(s)1 Serial network interface(s)2 Serial(sync/async) network interface(s)32K bytes of non-volatile configuration memory.16384K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 R3-2620#sh invNAME: "2620 chassis", DESCR: "2620 chassis, Hw Serial#: JAD04210FK4 (2213493411), Hw Revision: 0x102"PID: , VID: 0x102, SN: JAD04210FK4 (2213493411)***************************************************************************************************************R4-2610#sh verCisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-I-M), Version 12.3(26), RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2008 by cisco Systems, Inc.Compiled Mon 17-Mar-08 15:23 by dchih ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) R4-2610 uptime is 1 hour, 10 minutesSystem returned to ROM by power-onSystem image file is "flash:c2600-i-mz.123-26.bin" cisco 2610 (MPC860) processor (revision 0x203) with 28672K/4096K bytes of memory.Processor board ID JAD04220CM8 (958589688)M860 processor: part number 0, mask 49Bridging software.X.25 software, Version 3.0.0.1 Ethernet/IEEE 802.3 interface(s)2 Serial(sync/async) network interface(s)4 Low-speed serial(sync/async) network interface(s)32K bytes of non-volatile configuration memory.8192K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 R4-2610#sh invNAME: "2610 chassis", DESCR: "2610 chassis, Hw Serial#: JAD04220CM8 (958589688), Hw Revision: 0x203"PID: , VID: 0x203, SN: JAD04220CM8 (958589688)***************************************************************************************************************R5-2610#sh verCisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-I-M), Version 12.3(26), RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2008 by cisco Systems, Inc.Compiled Mon 17-Mar-08 15:23 by dchih ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) R5-2610 uptime is 1 hour, 12 minutesSystem returned to ROM by power-onSystem image file is "flash:c2600-i-mz.123-26.bin" cisco 2610 (MPC860) processor (revision 0x203) with 28672K/4096K bytes of memory.Processor board ID JAD034931R7 (1596926074)M860 processor: part number 0, mask 49Bridging software.X.25 software, Version 3.0.0.1 Ethernet/IEEE 802.3 interface(s)32K bytes of non-volatile configuration memory.8192K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 R5-2610#sh invNAME: "2610 chassis", DESCR: "2610 chassis, Hw Serial#: JAD034931R7 (1596926074), Hw Revision: 0x203"PID: , VID: 0x203, SN: JAD034931R7 (1596926074)***************************************************************3560s1#sh verCisco IOS Software, C3560 Software (C3560-IPSERVICESK9-M), Version 12.2(50)SE, RELEASE SOFTWARE (fc1)Copyright (c) 1986-2009 by Cisco Systems, Inc.Compiled Sat 28-Feb-09 03:13 by weiliuImage text-base: 0x00003000, data-base: 0x01D00000 ROM: Bootstrap program is C3560 boot loaderBOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(44)SE5, RELEASE SOFTWARE (fc1) 3560s1 uptime is 1 hour, 15 minutesSystem returned to ROM by power-onSystem image file is "flash:/c3560-ipservicesk9-mz.122-50.SE.bin" This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. cisco WS-C3560-24PS (PowerPC405) processor (revision S0) with 122880K/8184K bytes of memory.Processor board ID FDO1305X0FGLast reset from power-on1 Virtual Ethernet interface24 FastEthernet interfaces2 Gigabit Ethernet interfacesThe password-recovery mechanism is enabled. 512K bytes of flash-simulated non-volatile configuration memory.Base ethernet MAC Address : 00:24:C3:78:CC:80Motherboard assembly number : 73-9673-11Power supply part number : 341-0029-05Motherboard serial number : FDO1306046GPower supply serial number : LIT125106PHModel revision number : S0Motherboard revision number : A0Model number : WS-C3560-24PS-SSystem serial number : FDO1305X0FGTop Assembly Part Number : 800-25861-05Top Assembly Revision Number : D0Version ID : V07CLEI Code Number : COMUY10ARAHardware Board Revision Number : 0x01 Switch Ports Model SW Version SW Image ------ ----- ----- ---------- ---------- * 1 26 WS-C3560-24PS 12.2(50)SE C3560-IPSERVICESK9-M Configuration register is 0xF 3560s1#sh invNAME: "1", DESCR: "WS-C3560-24PS"PID: WS-C3560-24PS-S , VID: V07, SN: FDO1305X0FG************************************************3560s2>sh verCisco IOS Software, C3560 Software (C3560-IPSERVICESK9-M), Version 12.2(53)SE1, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2010 by Cisco Systems, Inc.Compiled Fri 12-Mar-10 16:54 by prod_rel_teamImage text-base: 0x01000000, data-base: 0x02E00000 ROM: Bootstrap program is C3560 boot loaderBOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(44)SE5, RELEASE SOFTWARE (fc1) 3560s2 uptime is 1 hour, 17 minutesSystem returned to ROM by power-onSystem image file is "flash:/c3560-ipservicesk9-mz.122-53.SE1.bin" This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. cisco WS-C3560-24PS (PowerPC405) processor (revision R0) with 131072K bytes of memory.Processor board ID FDO1232X292Last reset from power-on1 Virtual Ethernet interface24 FastEthernet interfaces2 Gigabit Ethernet interfacesThe password-recovery mechanism is enabled. 512K bytes of flash-simulated non-volatile configuration memory.Base ethernet MAC Address : 00:22:BE:AA:3B:80Motherboard assembly number : 73-9673-10Power supply part number : 341-0029-05Motherboard serial number : FDO12320G93Power supply serial number : DTN12254682Model revision number : R0Motherboard revision number : A0Model number : WS-C3560-24PS-SSystem serial number : FDO1232X292Top Assembly Part Number : 800-25861-05Top Assembly Revision Number : A0Version ID : V07CLEI Code Number : COMUY10ARAHardware Board Revision Number : 0x01 Switch Ports Model SW Version SW Image ------ ----- ----- ---------- ---------- * 1 26 WS-C3560-24PS 12.2(53)SE1 C3560-IPSERVICESK9-M Configuration register is 0xF 3560s2>sh invNAME: "1", DESCR: "WS-C3560-24PS"PID: WS-C3560-24PS-S , VID: V07 , SN: FDO1232X292 *************************************************************************************************************** 2950s1#sh verCisco Internetwork Operating System Software IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA12, RELEASE SOFTWARE (fc1)Copyright (c) 1986-2008 by cisco Systems, Inc.Compiled Tue 08-Jul-08 00:03 by amvarmaImage text-base: 0x80010000, data-base: 0x80680000 ROM: Bootstrap program is C2950 boot loader 2950s1 uptime is 40 minutesSystem returned to ROM by power-onSystem image file is "flash:/c2950-i6k2l2q4-mz.121-22.EA12.bin" This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. cisco WS-C2950T-24 (RC32300) processor (revision R0) with 19912K bytes of memory.Processor board ID FOC0918W0KXLast reset from system-resetRunning Enhanced Image24 FastEthernet/IEEE 802.3 interface(s)2 Gigabit Ethernet/IEEE 802.3 interface(s) 32K bytes of flash-simulated non-volatile configuration memory.Base ethernet MAC Address: 00:14:1C:1B:89:00Motherboard assembly number: 73-6114-10Power supply part number: 34-0965-01Motherboard serial number: FOC09171FJPPower supply serial number: DAB09146Q3FModel revision number: R0Motherboard revision number: A0Model number: WS-C2950T-24System serial number: FOC0918W0KXConfiguration register is 0xF 2950s1#sh invNAME: "2950s1", DESCR: "Cisco Catalyst c2950 switch with 24 10/100 BaseTX ports and 2 10/100/1000 BaseT ports"PID: WS-C2950T-24 , VID: R0 , SN: FOC0918W0KX***************************************************************************************************************2950s2#sh verCisco Internetwork Operating System Software IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(22)EA12, RELEASE SOFTWARE (fc1)Copyright (c) 1986-2008 by cisco Systems, Inc.Compiled Mon 07-Jul-08 23:39 by amvarmaImage text-base: 0x80010000, data-base: 0x80570000 ROM: Bootstrap program is C2950 boot loader 2950s2 uptime is 1 hour, 24 minutesSystem returned to ROM by power-onSystem image file is "flash:/c2950-i6q4l2-mz.121-22.EA12.bin" cisco WS-C2950-24 (RC32300) processor (revision S0) with 20957K bytes of memory.Processor board ID FOC1251X0R6Last reset from system-resetRunning Standard Image24 FastEthernet/IEEE 802.3 interface(s) 32K bytes of flash-simulated non-volatile configuration memory.Base ethernet MAC Address: 00:23:05:A7:D6:00Motherboard assembly number: 73-5781-14Power supply part number: 34-0965-01Motherboard serial number: FOC12511KW9Power supply serial number: DTH124520FSModel revision number: S0Motherboard revision number: B0Model number: WS-C2950-24System serial number: FOC1251X0R6Configuration register is 0xF 2950s2#sh invNAME: "2950s2", DESCR: "Cisco Catalyst c2950 switch with 24 10/100 BaseTX ports"PID: WS-C2950-24 , VID: S0 , SN: FOC1251X0R6.Power supply serial number: DTH124520FSModel revision number: S0Motherboard revision number: B0Model number: WS-C2950-24System serial number: FOC1251X0R6Configuration register is 0xF 2950s2#sh invNAME: "2950s2", DESCR: "Cisco Catalyst c2950 switch with 24 10/100 BaseTX ports"PID: WS-C2950-24 , VID: S0 , SN: FOC1251X0R6.

Price: 800 USD

Location: Wallkill, New York

End Time: 2023-12-16T17:56:40.000Z

Shipping Cost: N/A USD

Product Images

Item Specifics

All returns accepted: ReturnsNotAccepted

Type: Router

Brand: Cisco