Description: Normal 0 false false false EN-US X-NONE X-NONE Why purchase a recycled keyless entry remote transmitter? Prestige 91P 4-Button 1-Way Remote Control Transmitter. The vehicle keyless remote key fob you are going to purchase from us is pre-owned; aka: used, previously loved ;). We recycle OEM and aftermarket keyfobs and put them through a concise refurbishing process so we can guarantee our products are delivered to you in a ready-to-program state. We offer these car clickers at a significant cost savings to stealerships so you can keep your hard earned cash for something more fun while lightening your ecological footprint J. We call that a win-win! Why wait? Add some convenience to your daily routine and help save the environment, order your recycled car remote control today! Installed RKE System Type: Please be sure you have an AFTERMARKET (RKE) remote keyless entry system. If your current remote looks the same then this will work. Other options include: Dealer Installed or Factory. The system installed in your vehicle will CHANGE the required remote. If you are unsure send us a message with your current remotes FCC ID and Part # and LED Light color. If you no longer have your remote then send us a message with your system brand, and system id #. What are you purchasing ? This is ONE (1) replacement keyless entry remote control that will work with your AFTERMARKET installed RKE system. Compatibility: Works with vehicles that use a compatible aftermarket RKE (remote keyless entry) system installed. See our compatible system list below or match your current remote FCC ID and / or part # or circuit board # and LED Light color (if applicable)to the numbers listed below. Compatible FCC ID#(s): Prestige 91P 4-Button 1-Way Remote Control Transmitter. FCCID FCC ID H5OT43 Alternate Spellings H5O-T43, H5O T43, H5OT43, HSOT43, H50T43 Replaces the following Prestige remotes: 91P PROPL4TX 101TXP 140TXP 91MP 620TXP PROPLTX APS920TX2P APS620CFP APS920CF2P PA91 91PR PN1 Part #(s) 91P or PA91 Interchangeable Part #s: CATX50 91P PA91 Replacement Part Numbers: 91P, 91PR, PA91, PROPLTX, APS920TX2P, 91MP, APS620CFP, 620TXP, APS920CF2P, APS45C Button Count: 4 Button; Lock, Unlock, Trunk/Remote Start, Option Battery (installed): 2; CR2016 Frequency: 433-434 MHz LED Light Color: Red Condition Notes: Pre-Owned ready to program to your compatible vehicle RKE system. Compatible Aftermarket Installed Systems: This remote works on these Code Alarm systems: CA1050, CA2050, CA5050. The FCC ID of this remote is H5OT43. The Code Alarm Part Number is CATX50. This can be used to replace the following Type 9 Transmitters: CATX1B, CATX1TW, CATXMLC, CATXMT, CAT1, CAT1MTW, CAT4, CATX100, CPL100TX, CATX4. Remotes are tested on keyless entry signal testers to be sure they are working properly before we ship them to you. Programming: Please note not all customers will be able to complete the programming on their own so if you are having trouble or unsure diagnostic programming is available at your local qualified automotive locksmith or car/audio shop. METHOD #1 Program: At times it may become necessary to program replacement or additional transmitters for use with your system. To do this: With the system unlocked or disarmed, turn the ignition key to the on position. Press and release the Program/Override push-button switch three times The unit will flash the parking lights and or beep the horn once to indicate that the system is in the transmitter program mode. The LED will also flash one time pause, one time pause, etc... indicating that you are in the transmitter program mode of the unit’s channel 1 or single button program mode. Press and hold the lock button of each additional transmitter you wish to operate your system. NOTE: The unit is capable of storing up to 4 transmitters. If a fifth transmitter is added, the first transmitter programmed will be bumped out. This unit will also program all 4 buttons of your transmitter when the lock button is operated while in the program mode. Once all transmitter have been programmed, turn the ignition switch off to exit the program mode. If you require priority programming for multiple vehicle operation please read on. The system allows priority button programming in case you intend to operate two vehicle with one transmitter. In this instance you will program the default button combination, (One Button Programming), for the main vehicle you drive, and a different combination for the second vehicle so you are not unlocking, locking, or starting both vehicles when they are within range of each other. To prioritize transmitters after programming the transmitter into the first vehicle: Enter the transmitter program of the second vehicle as above by: With the system unlocked or disarmed, turn the ignition key to the on position. Press and release the push-button switch three times The unit will flash the parking lights and or beep the horn once to indicate that the system is in the transmitter program mode. The LED will also flash one time pause, one time pause, etc... indicating that you are in the transmitter program mode of the unit’s channel 1 or single button program mode. Press and hold any combination of buttons of your transmitter that was not used for your primary vehicle. If, for instance you can press & hold the lock & unlock buttons simultaneously, for controlling Lock function of the second vehicle. Press and release the program push-button switch once to advance to channel 2, unlock. Here you can press and hold the lock & start buttons simultaneously, for controlling the unlock function of the second vehicle. Press and release the program push-button switch once to advance to channel 3, start. Here you can press and hold the start & option buttons simultaneously, for controlling the start function of the second vehicle. Deleting Transmitter From Your System: It may be necessary to delete a lost transmitter or to reprioritize a transmitter that is programmed to your system. To remove a transmitter that has been programmed in your system: Enter the transmitter program mode of channel 1 as indicated above. Press and hold any transmitter button that has not been programmed into channel 1 until you hear a chirp, then release and immediately press the same button a second time until you hear a long chirp followed by a short chirp. This action erases the transmitter. If the transmitter you wish to erase has been lost or stolen then following the information below will successfully remove the transmitter. NOTE: For this procedure, you must have all transmitters you wish to remain programmed in your system available. Enter the transmitter program mode of channel 1 as indicated above. Press and hold the lock button of each transmitter you wish to operate the lock function of your unit making sure you occupy all 4 transmitter slots. In other words, you have three transmitters you wish to remain programmed. Press and hold the lock button of transmitter one until a long chirp is heard, then press and hold the lock button of transmitter two, then press and hold the lock button of transmitter three, followed by pressing and holding the lock button of transmitter one again. This action fills all 4 receiver slots. Advance to receiver channel 2 by pressing the push-button switch one time. Press and hold the unlock button of each transmitter you wish to operate the unlock function of your vehicle, again making sure all 4 transmitter slots are filled. Advance to receiver channel 3 by pressing the push-button switch one time. Press and hold the unlock button of each transmitter you wish to operate the start function of your vehicle, again making sure all 4 transmitter slots are filled. If you are uncomfortable about the programming of additional transmitters as outlined in the processes above please contact your installation center or call the technical service number listed on the back of the transmitter for help. METHOD #2 Programming Programming Procedure: 1) Enter the vehicle, and turn the ignition switch to the ON position. 2) Press and release the Programming button switch 3 times. 3) Press and hold the LOCK button of the transmitter you wish to program. 4) The lights will flash 1 time, indicating that the system is accepting the programming of channel #1 which is lock. Repeat step 3 for each transmitter you wish to program. 5) Press and release the valet push button switch 1 time to advance to channel 2. 6) Press and hold the UNLOCK button of the transmitter you wish to program. 7) The lights will flash 1 time, indicating that the system is accepting the programming of channel #2 which is unlock. Repeat step 6 for each transmitter you wish to program. 8) Press and release the valet push button switch 1 time to advance to channel 3. 9) Press and hold the TRUNK button of the transmitter you wish to program. 10) The lights will flash 1 time, indicating that the system is accepting the programming of channel #3 which is trunk. Repeat step 9 for each transmitter you wish to program. 11) Press and release the valet push button switch 1 time to advance to channel 4. 12) Press and hold the STAR button of the transmitter you wish to program. 13) The lights will flash 1 time, indicating that the system is accepting the programming of channel #4 which is remote start. Repeat step 12 for each transmitter you wish to program. Why does your vehicles installed RKE / Security system determine which remote control your can purchase? The remotes job is to pair with your vehicles installed RKE system. It will only sync to a matching system; therefore, you cannot purchase a different type of remote than the remote manufactured with the system. It will not pair with a foreign system. Programming: We will send you information on how to locate programming requirement/instructions for your make, model, and year vehicle. Some vehicles have DIY (do-it-yourself) programming instructions available. While other vehicles require diagnostic programming which is available at your local qualified automotive locksmith or dealer. Programming Requirement Information NOTE: The vehicle manufacturers determine the programming requirements at the time of manufacture. We pass the programming requirements / instructions on to you as a courtesy. We do not write the programming nor do we determine which vehicles require diagnostic programming and which vehicles can be programmed by the you (DIY). We are not locksmiths nor mechanics nor are we familiar with EVERY vehicles program sequence. If you have questions: 1. Check your Vehicle Owners Manual for OEM Factory remotes or The User Manual for Dealer Installed or Aftermarket RKE systems. 2. YouTube has many video postings from do-it-yourselfers to assist with all kinds of questions & most customers find if very helpful to WATCH the programming being done which can eliminate mistakes in the sequence. To locate the programming for your vehicle via this method go to YouTube and once there in the search bar type in the following: i. If you have a factory RKE system: your make model year + the words program remote (i.e.: 2005 Ford Mustang program remote) ii. If you have a dealer installed or aftermarket RKE system: the FCC ID or system type + the words program remote (i.e.: ELVAT5C program remote or AS200 program transmitter?) 3. For OEM FACTORY installed systems: send us an eBay message with your vehicles make, model & year = we can pass on to you any programming information requirements we have on hand. 4. For DEALER INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# and the vehicles make, model, & year = we can pass on to you any programming information requirements we have on hand (the programming for dealer installed RKE systems will be different than Factory or Aftermarket installed RKE systems). 5. For AFTERMARKET INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# = we can pass on to you any programming information requirements we have on hand (the programming for aftermarket installed RKE systems will be different than Factory or Dealer installed RKE systems). 6. There are also many auto forums that you can go onto by just conducting a google search with your questions. 7. or a local automotive locksmith or your local parts/car/audio store will typically be able to assist you if you are trying to avoid the dealer.
Price: 34.99 USD
Location: Wellsboro, Pennsylvania
End Time: 2024-12-29T16:35:36.000Z
Shipping Cost: 6.96 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Non-Domestic Product: No
Warranty: 60 Day
Custom Bundle: No
Color: Black
Programming: DIY and/or Qualified Locksmith- See description
Manufacturer Part Number: FCC ID H5OT43 HSOT43 type 9 transmitter keyfob beeper clicker red
For Vehicles with:: pre-existing Aftermarket installed system ONLY
Modified Item: Yes
Installed Battery Type & Quantity: 2: CR2016 working battery (not tested for life)
California Prop 65 Warning: N/A
Brand: Code Alarm
2-Way Paging: No
Unit Type: Unit
Programming NOTE: You must program this remote to sync w/ system
Model: CA1050 CA2050 CA5050 CAT1 CAT1MTW CAT4 CATX100 CPL100TX CATX4
Frequency: 433-434 MHz
Features: Remote Start, Trunk Release, ready to program - battery installed - TESTED working 100%, Keyless entry remote car key fob control transmitter starter clic, Keyless entry remote comes with DIY FREE Programming instructions, ready to program TESTED Working 100% Battery installed red LED
Surface Finish: 4 buttons: Lock, Unlock, Trunk/Start, Option
Stock #: 516A "B"
Country/Region of Manufacture: Unknown
Unit Quantity: 1
