Crestron DMRMC4K100C DigitalMedia 8G+ Receiver and Room Controller

Description: This Crestron DMRMC4K100C DigitalMedia 8G+ Receiver and Room Controller is a versatile device perfect for any smart home setup. With its wired connectivity, it allows for easy installation and reliable performance. The room controller is compatible with Adapter and has Audio/Video Outputs of HDMI, making it ideal for anyone who wants to control their audio and video devices with ease. The device is perfect for those who want to have a seamless experience in their home or office.Video Input Signal TypesDM 8G+ & HDBaseT w/Deep Color, 3D, & 4K Output Signal TypesHDMI w/Deep Color, 3D, & 4K (DVI compatible[2]) Maximum Resolutions ScanTypeResolutionFrameRateColorSamplingColorDepthProgressive4096x2160 DCI 4K&3840x2160 4K UHD24 Hz4:4:430 bit30 Hz4:4:424 bit30 Hz4:2:236 bit60 Hz4:2:024 bit2560x1600 WQXGA60 Hz4:4:436 bit1920x1080 HD 1080p60 Hz4:4:436 bitInterlaced1920x1080 HD 1080i30 Hz4:4:436 bit NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHzAudio Input Signal TypesDM 8G+, HDBaseT Output Signal TypeHDMI FormatsDolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channelsCommunications Ethernet10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP RS-2322-way device control and monitoring up to 115.2k baud with hardware and software handshaking (via control system) IR/Serial1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 Volts) up to 19.2k baud (via control system) DigitalMediaDM 8G+, HDCP 2.2, EDID, CEC, PoDM, Ethernet HDBaseTHDCP 2.2, EDID, PoE, Ethernet HDMIHDCP 2.2, EDID, CEC NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI device and a control systemConnectors HDMI OUT(1) 19-pin Type A HDMI female;HDMI digital video/audio output (DVI compatible[2]) COM(1) 5-pin 3.5 mm detachable terminal block;Bidirectional RS-232 port;Up to 115.2k baud, hardware and software handshaking support IR 1 – 2(1) 4-pin 3.5 mm detachable terminal block;Comprises (2) IR/Serial ports;IR output up to 1.1 MHz;1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud LAN(1) 8-pin RJ45 female, shielded;10Base-T/100Base-TX Ethernet port Ground(1) 6-32 screw;Chassis ground lug DM IN(1) 8-pin RJ45 female, shielded;DM 8G+ input, HDBaseT compliant;PoDM PD port (HDBaseT PoE compatible)[3,4];Connects to the DM 8G+ output of a DM switcher, transmitter, or other DM device, or to an HDBaseT device, via CAT5e, CrestronDM-CBL-8G, or CrestronDM-CBL-ULTRAcable[1] 24VDC 0.75A MAX(1) 2.1 x 5.5 mm DC power connector;24 Volt DC power input;PW-2407WUpower pack includedControls & Indicators HDMI OUT(1) Green LED, indicates video signal presence at the HDMI output LAN(2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity DM IN(2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence RESET(1) Recessed pushbutton, for hardware reset SETUP(1) Red LED and (1) recessed pushbutton, for Ethernet setup 24VDC(1) Green LED, indicates operating power supplied via PoDM, HDBaseT PoE, or local power packPower Power Pack (included)Input: 100-240 Volts AC, 50/60 Hz;Output: 0.75 Amps @ 24 Volts DC;Model:PW-2407WU Power over DM (PoDM)IEEE 802.3at Type 1 Class 3 (12.95 W) compliant PoDM PD (Powered Device), capable of being powered by a PoDM PSE (Power Sourcing Equipment)[3] Power over HDBaseTIEEE 802.3at Type 1 Class 3 (12.95 W) compliant HDBaseT PoE PD (Powered Device), capable of being powered by an HDBaseT PoE PSE (Power Sourcing Equipment)[4]Environmental Temperature32° to 104° F (0° to 40° C) Humidity10% to 90% RH (non-condensing) Heat Dissipation29 BTU/hr

Price: 35.99 USD

Location: Phoenix, Arizona

End Time: 2024-09-03T22:21:42.000Z

Shipping Cost: 0 USD