Digital Shore D Hardness Tester Gauge Durometer For Rubber Plastic Leather Wax

Description: Digital Shore D Hardness Tester Gauge Durometer For Rubber Plastic Leather Wax Note: Battery/Powder not Included During The Shipping !!! Major performances :▲ Type D are applicable to the testing of low and medium hardness, and high-hardness materials. ▲ This hardness gauge conforms to the regulations of GB/T531,GB2411, HG/T2489, JB6148.Technical Specifications▲ Model: LX-D-Y▲ Measuring value: 0~100HD▲ Recommended range of measurement: 20~90HD▲ Size: 115*60*25mm▲ Needle stroke: 2.5mm▲ Needle head size: SR0.1mm▲ Weight: ~0.13kgUse method:▲ When using single pointer models, one should place the sample in the solid plane, hold the hardness gauge, keep the pressure needle at a distance of at least 12 mm from the edge of the sample, smooth enough pressure in the pressure on the sample, and smoothly press on the sample to a full extent. ▲ One should press the pressure needle vertically to the sample, and until pressed to a full extent and contact the sample completely, then read the calibration value within one second.▲ At measuring points which are at least 6 mm away from each other, measure hardness values for five times, and calculate the average value(for microporous material, the distance between the measuring points should be at least 15 mm). ▲ In order to keep the stability of conditions and improve the accuracy of determination, one should install the hardness gauge on the same type of the measuring shelf from a complete production network. When using double pointer models to do measurement, one should rotate the supporting pointer to the wax, etc.

Price: 101.26 USD

Location: 合肥

End Time: 2024-01-17T09:27:14.000Z

Shipping Cost: 0 USD