Description: PLEASE NOTE YOU ARE NOT BUYING THE RC REMOTE NOR ARE YOU BUYING ANY ACTUAL ATENNAS! This is a 3D printed antenna holder that you can mount to your DJI RC remote. It includes the 2 wire leads (I've installed them in the part already for you) and 2 screws (you use these screw as replacements for the 2 black screws you will remove from the back of the remote as these screws are longer). Only finger tighten the screws do not over-tighten as they are simply going into plastic. This lets you use whatever antennas you buy to attach external antennas to your RC remote since DJI Didnt think you needed this functionality this bracket has been designed to give you that. It will work with the ALFA APA-M25's even with just a hair of space between them. I use these personally on my drone. PLEASE NOTE the below1. I do not offer support of how to take your remote apart or install these (it is not that hard just go slow, no special tools required beyond something plastic to get your remote apart like a guitar pick or something you can wedge in to snap apart the plastic tabs)2. There is no guarantee that your range will be extended with external antennas (although for me my signal quality was better so i get less interruptions in my city). Please remember DJI drones are LINE OF SIGHT so you need to be able to have a line of sight for best signal.3. This mod is completely reversible and does NOT require any soldering, just look up on youtube and you'll find someone who's done a similar mod, you need to open your controller, remove some screws and a metal plate, then disconnect 2 internal antenna wires (they just pop off, but go SLOW). Then attach these two wires and gently screw down the plastic 3d bracket and you're done.4. The 3d printed plastic peice is not 100% perfect color match to the controller, but its very very close (as close as I could get) I'd say its about 90% close, from a distance no one will notice its not a normal part to the remote. Just dont expect 100% perfect color match and you'll be pleased.
Price: 29.99 USD
Location: Bothell, Washington
End Time: 2024-10-25T07:40:31.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Compatible Brand: DJI
Brand: DJI
Type: Remote Control
Component Type: Aircraft Controllers (Transmitters)
Unit Type: Unit
Color: Gray
Manufacturer: DJI
Model: RM330
Compatible Model: DJI Mini 3 Pro, DJI Mini 3, DJI Mavic 3, DJI Mavic 3 Cine, DJI Mavic 3 Pro, DJI Mavic 3 Classic, DJI Mavic 3 Pro Cine, DJI Air 2S
MPN: CP.RC.00000005.01
Country/Region of Manufacture: China
Unit Quantity: 1
