Dodge 6.7L Cummins Diesel 68RFE Overdrive Hub and Clutch Housing Upgrade 2007-17

Description: DODGE RAM 68RFE Overdrive Hub (72570-01) and Clutch Housing Upgrade (No Clutches) FITS 2007-17 6.7L CUMMINS DIESEL PICK-UP TRUCKS 72960-16KBLK Dodge trucks pulling heavy loads or boosted to 400–600HP are at high risk for overdrive burnup due to the stock transmission’s insufficient clutch capacity and fragile OE clutches. Even small amounts of heat and extra torque will push the thin (.034"), single-sided clutches over the edge, distorting the clutch pack. The fact is, any distortion of the clutch pack takes the clearance out of spec and makes overdrive clutch burnup inevitable. Keep hardworking trucks on the road with the Sonnax Smart-Tech® overdrive clutch housing kit 72960-16K. The unique billet aluminum housing holds a physically taller clutch pack and increases OD apply area by 16%. Plus, use of 2X thicker clutches increase clutch pack steel mass by 28% for unrivaled heat dissipation. This groundbreaking new kit is the only top-of-the-line upgrade that eliminates clutch problems without relying on valve body/pump modifications or adding the expense of extra components. Custom housing holds physically larger clutch pack for 20% more clutch capacity16% More OD apply area for firmer, more controlled shifts2X Thicker steels and double-sided clutches increase steel mass by 28% for maximum heat dissipationBolt-on anchor plate eliminates clutch pack flexing and distortion that contribute to heat build-upCombine with Sonnax line pressure booster kit RFE-LB1 for even higher levels of performanceNote:This kit replaces the original Sonnax Smart-Tech overdrive clutch housing kit 72960-06K. The new and improved kit features longer, flange-head plate screws for extra secure fit and optimal clamping force. Contents Overdrive/Reverse Housing Lip Seal Adapter Sleeve UD/OD Reaction Plate Anchor Plate Shims (2) Bolt-On Anchor Plate Screws (12) Chisel72570-01OE Part No. 52119776AAOverdrive clutch hub and shaft failure is common in Chrysler 66RFE and 68RFE transmissions, in both completely stock units and heavy duty/performance applications. The failure always begins with small cracks at the lubrication cross holes that migrate through the rest of the shaft, eventually resulting in catastrophic gear train failure. Sonnax heavy duty overdrive clutch hub and shaft 72570-01 is a critical upgrade to protect any vehicle at any power level. Sonnax cryogenically treats the OE hub and shaft to make the base steel more stable then shot-peens the lubrication cross holes to greatly reduce crack formation and increase load capacity. The result is a highly reliable hub and shaft assembly that’s an easy, direct replacement for all 66RFE and 68RFE units. Clutch hub and shaft is cryogenically treatedShot-peened lubrication cross holesGreater crack resistance than original hub and shaft

Price: 909.33 USD

Location: Columbus, Ohio

End Time: 2024-01-03T19:07:53.000Z

Shipping Cost: N/A USD