DSLRKIT 4POE 1SFP 2UpLink Gigabit 7 Ports Passive PoE Switch Injector Ethernet

Description: DSLRKIT MID4P2USG Passive PoE Injector Switch ALL Gigabit Ethernet Support EXTEND mode, max Network Cable length to 250 meters Power supply not included Supports 12~57V DC power supply DC IN port 5.5X2.1mm, inside positive (+) outside negative (-) 7 Ports (4 PoE,2Uplink,1SFP) 10/100/1000Mbps Midspan Mode-B Unsolicited Power(4,5+/7,8-) 52V Power adapter links: 52V1.85A http://www.ebay.com/itm/201863649634 52V2.7A http://www.ebay.com/itm/192137824001 48V Power adapter links: 48V1A https://www.ebay.com/itm/203879278259 48V2A http://www.ebay.com/itm/191880113415 48V3A http://www.ebay.com/itm/201384084416 This item do not include the power adapter, you need to buy an extra power adapter according to your requirement. So it only suitable for PoE professional customers. Please select the correct Power adapter by POE device， 802.3af (802.3at Type 1) PoE device, We suggest DC 48V power adapter. 802.3at Type 2 PoE+(plus) device, We suggest DC52V power adapter. Please refer to the Wikipedia "Power over Ethernet" section, under the "Standard implementation" paragraph. NOTE. When EXTEND mode enable, the Max bandwidth for the Power Link (PoE) port 1-4 network port will be reduced to 10Mbps for each one. Please check your IP CAMERA's bit stream setting. We recommend the value does not over 8Mbps(8192Kbps). (The up-link is not affected, it will always working at 1000Mbps max speed) If your camera is with word “12V/PoE” as this picture shows, then please select 48V(or 52V) Power Adapter, do not select 12V Power Adapter. Because "12V/PoE" means it can offer power supply to camera via 12V DC port or 48V PoE Ethernet port: This is an Passive Power Over Ethernet switches, including 4 unsolicited PoE Ethernet ports 2 Uplink ports and 1.25G SFP ports . DC port apply 12~57V power supply adapter(not included), any one of the 4 POE port can provide output power, each Ethernet port can provide network transmission speeds of up to 10/100/1000Mbps , with Cat5 / 5e / 6 network cable. Please do not connect any "NONE PoE gigabit ethernet device and Uplink device" on "PoE 1X~PoE 4X" port, this will damage your device.. NONE PoE gigabit ethernet device and Uplink device can only access "UpLink 5X~6X" port, Please do not access "PoE 1X~ PoE 4X", this will damage your device. Features: 6 x 10/100/1000Mbps Auto-negotiation Fast Ethernet RJ-45 ports with 4-Ports PoE function(port 1-port 4) 1x 1.25G SFP Port Support EXTEND mode, max Network Cable length to 250 meters. Midspan Mode-B Unsolicited Power(4,5+/7,8-) Per port Maximum current: 0.84A Supports 12~57V DC power supply Each port supports auto MDI/MDIX, so there is no need to use cross-over cables. Full/half duplex transfer mode for each port. Power Input Supports INPUT 12-57V DC power supply Power DC port 5.5 x 2.1mm,inside positive (+) outside negative (-) PoE Power on RJ45 Power +: pin 4 & pin 5 ; Power -: pin 7 & pin 8 DC Output: 12-57V, Per PoE port Max 0.84A, Product Dimensions 200mm W x 95mm D x 30mm H Temperature Operation Temperature:0 ~40℃ (32 ~104℉) Storage Temperature: -40 ~70℃(-40 ~158℉) Humidity Storage Humidity 5%~90% non-condensing, Operating Humidity 10%~90% non-condensing Filtering Address Table: 2K entries per device Packet Filtering Forwarding Rate 10Mbps Ethernet: 14,880/pps 100Mbps Ethernet: 148,800/pps 1000MBase-T Ethernet: 1,488,000/pps. MAC address Learning: Automatic update Transmission Method: Store – and- Forward Item Included: DSLRKIT MID4P2USG ALL Gigabit PoE switch x1 (Power supply not included)

Price: 22.99 USD

Location: Shenzhen

End Time: 2024-01-07T13:34:14.000Z

Shipping Cost: 3.5 USD