Empire General foam Blow Mold Sleigh Runners replacement pair 3d printed

Description: 3d printed replacement sleigh runners/rails for empire/General foam sleigh. These are 3d printed in gold close to the original and very durable, however they are still plastic and can break. They are thicker than the originals and one inch shorter, but the same length. The design varies slightly from the original to give them durability but also make them printable. Couple of notes: there are a total of eight mounting holes in the top, two of which line up with originals so if the bottom holes are still intact on your sleigh, you can re use them. The holes for the spacers are also placed to line up with the originals. It is absolutely imperative that the spacing rods are used - they add a lot to the structural integrity of the rails.. If you don't have originals you can use a piece of 1/4 inch threaded rod. Unfortunately due to the style of printer these are made on (there is currently only one that can do an object this long) there is a "good side" and a "not so good side" so I recommend telling me if you have your sleigh left facing or right facing, and I will print them so that you have nice sides facing the viewers (or nice sides facing out, whichever you prefer) . Lead time is approximately one week depending on orders. The ones you will get are the color in the second pic, not on the sleigh. The shiny gold was too brittle and broke easily. Please note the one on the sleigh in the pic had the front-most hook fail while printing, yours will look like the other pics with a full hook. Please feel free to reach out with any questions. Designed with the help of Kathy Yoder www.gnk-collectibles.com

Price: 100 USD

Location: Seaford, New York

End Time: 2025-01-05T21:52:04.000Z

Shipping Cost: 25 USD