Energy Staff POSOH Live Sinus Mishin Tesla coil emitter active passive NEW

Description: Short description Active staff ( POSOH ) - has a small generator built into the staff. It can work from the network, battery, or power bank. Designed for outdoor use, in greenhouses, in garden beds, but can also be used at home. It contains one program. For the USA and Canada, a 110v to 220v converter is needed to connect to the network Passive staff ( POSOH ) - connected to an existing Live sinus 5 fifth or Live sinus 6 generator, can also be connected to generators from other manufacturers through an adapter. Used indoors, works on generator settings, you can change the power and mode. Can be used in crop production and animal husbandry. For growing seedlings, increasing yields, accelerating plant growth. Improves the health of animals, birds, horses, dogs. LIVE SINUS ENARGY STAFF ( POSOH ) The energy staff is a new type of emitter, which is a variation of the emitter based on the Tesla bifilar coil The staff is a source of a strong electric field (that what A. Mishin calls "electrostatics"), much stronger than the classic bifilar Tesla coil can give even in the high voltage version. Firstly, the Energy Staff is used for health purposes. You need to do this carefully, carefully listening to your body. and monitoring the reactions of the body, especially in first days of use. You should start working with the staff with short sessions (15-30 minutes). During long sessions, the Energy Staff should be placed away from the human body. Energy Staff LIVE SINUS APPLICATION During the experiments, it was found that, subject to the totality of all factors (sufficient amount of light, heat, nutrients, taking into account the properties of specific plants, etc.), positive effects when an electric field is added Energy staff, in some cases exceeded the average by several times typical indicators (for example, shoot growth rate). The third promising area of application of the Energy Staff: peasant farms and mini-farms, namely poultry and livestock. There are first positive user reviews on the use of the Energy Staff in this direction. The energy staff is a new type of emitter, which is a variation of the emitter based on the Tesla bifilar coil The staff is a source of a strong electric field (that what A. Mishin calls "electrostatics"), much stronger than the classic bifilar Tesla coil can give even in the high voltage version. century (2-3 meters). Short sessions can be carried out at a distance of about half a meter between the body and the emitter. Position the Energy Staff during a session recommended parallel to the spine General recommendations for use The energy sticks are similar to those given for classic bifilar coils. The second scope of the Energy Staff: crop production and gardening. Placing the Energy Staff in close proximity (0.5-1m) to plants has a beneficial effect on them. growth, flowering, fruit ripening and resistance to diseases and pests. The energy staff significantly speeds up and facilitates the process of survival for the plant on new place when planting and transplanting. The effect of the use of the staff is clearly visible on greenhouse plants in late summer - early autumn, when the plants are weakening and needs more support. During the experiments, it was found that, subject to the totality of all factors (sufficient amount of light, heat,nutrients, taking into account the properties of specific plants, etc.),positive effects when an electric field is added Energy staff, in some cases exceeded the average by several times typical indicators (for example, shoot growth rate). The third promising area of application of the Energy Staff: peasant farms and mini-farms, namely poultry and livestock. There are first positive user reviews on the use of the Energy Staff in this direction. DESIGN The energy staff is a prefabricated structure of several parts: • the central part is a block for generating high-voltage sinusoidal voltage (with a frequency of about 300 kHz and an amplitude of up to 500-700V) with an external electrical connector on a short cable; • two twisted field emitters on cylindrical plastic pipes-frames,which are symmetrically located on both sides of the central part;• the basis for installation of a staff vertically; • top cover. Attention! The device is delivered to the customer in a cardboard box disassembled into its component parts for self-assembly on site. is delivered to the customer in a cardboard box disassembled into its component parts for self-assembly on site. OPTIONS: 1. Passive Energy Staff To operate such a staff, an external signal generator with AFC (automatic frequency control) is required, designed to work with bifilar Tesla coils. Using a LIVE SINUS generator in a low voltage version connections, you get full connector compatibility and extensive customization options for convenience and efficiency (such as as a complex dynamic AM + FM signal modulation along the Fibonacci series and etc.). Passive Energy Staff in its central part contains a built-in step-up capacitive torus, wound with a twisted pair of MGTF wire, from which high voltage is removed for emitters. This version of the staff is designed for indoor use. (without the influence of precipitation and other adverse factors external environment). 2. Active Energy Staff It is an Energy Staff that does not require connection to work. to an external generator. In addition to the step-up capacitive torus, a compact generator with a voltage converter is built into the Energy Staff. For work this version of the Energy Staff, it should be connected to any DC source in a wide voltage range (6.5–33V, at a current of up to 0.2A). Can use both a power supply for connecting to a 220V network and a battery. This version of the staff is designed to work both indoors and outdoors. The design of the Energy Staff, with proper use of the latter, protects built-in electronics from moisture. The built-in generator board is equipped with an efficient heat sink, which guarantees reliable operation. products around the clock, even at elevated ambient temperatures. Tesla coils. Using a LIVE SINUS generator in a low voltage version connections, you get full connector compatibility and extensive customization options for convenience and efficiency (such as as a complex dynamic AM + FM signal modulation along the Fibonacci series and etc.). Passive Energy Staff in its central part contains a built-in step-up capacitive torus, wound with a twisted pair of MGTF wire, from which high voltage is removed for emitters. This version of the staff is designed for indoor use. (without the influence of precipitation and other adverse factors external environment). 2. Active Energy Staff It is an Energy Staff that does not require connection to work. to an external generator. In addition to the step-up capacitive torus, a compact generator with a voltage converter is built into the Energy Staff. For work this version of the Energy Staff, it should be connected to any DC source in a wide voltage range (6.5–33V, at a current of up to 0.2A). Can use both a power supply for connecting to a 220V network and a battery. This version of the staff is designed to work both indoors and outdoors. The design of the Energy Staff, with proper use of the latter, protects built-in electronics from moisture. The built-in generator board is equipped with an efficient heat sink, which guarantees reliable operation.products around the clock, even at elevated ambient temperatures. This version of the staff is designed for indoor use. (without the influence of precipitation and other adverse factors external environment). 2. Active Energy Staff It is an Energy Staff that does not require connection to work. to an external generator. In addition to the step-up capacitive torus, a compact generator with a voltage converter is built into the Energy Staff. For work this version of the Energy Staff, it should be connected to any DC source in a wide voltage range (6.5–33V, at a current of up to 0.2A). Can use both a power supply for connecting to a 220V network and a battery. This version of the staff is designed to work both indoors and outdoors. The design of the Energy Staff, with proper use of the latter, protects built-in electronics from moisture. The built-in generator board is equipped with an efficient heat sink, which guarantees reliable operation.products around the clock, even at elevated ambient temperatures. ASSEMBLY, CHECK 1.Connect the connector of the upper emitter of the Energy Staff to the corresponding connector of the central unit and mechanically connect these parts. Connect and attach the bottom emitter in the same way. 2.Insert the four legs of the stand into the cross. Then put the staff on the stand and put on the cover. 3. In the passive version of the Energy Staff (with connection to an external generator): connect the Energy Staff to the generator (for the LIVE SINUS generator this is unmarked cable, i.e. low voltage mode). Active Energy Staff (with built-in generator): connect the Energy Staff to the power source through the appropriate connector. 4. You can check the presence of a field around the emitters with the green indicator of the electric field. The field should be checked both around the lower emitter and the upper one. 4. You can check the presence of a field around the emitters with the green indicator of the electric field. The field should be checked both around the lower emitter and the upper one.

Price: 285 USD

Location: Odessa

End Time: 2023-12-08T11:42:49.000Z

Shipping Cost: 0 USD