Enerpac PUJ1200B Hydraulic Pump 10000psi 1/2Hp with 3-Way Valve 115V 1PH

Description: Used condition good working condition, has some normal wear as shown, please see pictures. Includes a 20 foot hose.Product DescriptionThe Enerpac PUJ-1200B two-speed, three-way valve hydraulic electric pump is for lifting, bolting, or applying pressure at faster speeds and for longer periods of time than a hand pump in construction, manufacturing, and maintenance and repair applications that do not require load holding. It can advance a single-acting or a double-acting cylinder or power a hydraulic tool, and can hold a load. A non-adjustable internal pressure relief valve and an adjustable external pressure relief valve help protect the pump from overload. A thermal switch shuts down the motor when the oil temperature exceeds 150 degrees Fahrenheit (65 degrees Celsius). This two-speed pump is for applications where there is little or no load initially, but where increased force is needed when the load is applied. In the first stage, the pump supplies lower pressure with higher flow until a load is detected. Once a load is detected, the pump switches to the second stage, which supplies higher pressure and lower flow. The pump can start under full load and is intended for intermittent duty-cycle applications, such as punching. The pump's molded body helps protect it from damage due to bumps, abrasions, and contaminants, such as dirt and water. The valves have manual control to advance and retract a tool. It has a built-in handle for carrying the pump between locations. The pump has 3/8" National Pipe Taper (NPT) threaded input and output ports for connecting to a hose or gauge (sold separately). A pendant switch controls the motor and valves, and the switch has a 10-foot cord to allow the operator to control the pump from a distance. The pump has a 5-foot power cord.SpecificationsMaximum operating pressure, first stage 200 pounds per square inch (psi) Maximum operating pressure, second stage 10,000 psi Maximum output flow rate per minute, first stage 200 cubic in. Maximum output flow rate per minute, second stage 20 cubic in. Usable oil capacity 0.5 gallon (115 cubic in.) Motor Rating 0.5 horsepower, universal Motor current 9 amp at 10,000 psi and 12,000 revolutions per minute Motor voltage 115V Maximum operating temperature 150 degrees Fahrenheit (65 degrees Celsius) Output valve type Three-way, two-position Power source 15 amp/120V, 50/60 Hertz, grounded, single-phase Operating noise level 85 to 89 decibels (dBA) Weight 24 lb. Dimensions 14.25 x 9.62 x 9.62 inches (H x W x D)H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from back to front.

Price: 1150 USD

Location: Milan, Michigan

End Time: 2024-12-05T01:40:21.000Z

Shipping Cost: N/A USD