Description: STEP 6. CURINGTo achieve the best cure results, the ambient condition should be between 75°F to 85°F and the relative humidity is below 80%. The colder the temperature the longer takes to fully cure. Use an infrared lamp to warm the ambient temperature. Infrared lamps also work well for warming large work areas. Post Curing at 150°F for 2 hours will accelerate full curing.Rinse the Surface with warm water and mild detergent before use. CUTTING AND POLISHINGAllow to fully cure for 48 hours before polishing or machining. MAX CLR can be cut, ground or CNC or lathe machined to shape.Polishing improves scratch resistance.The transparency is also restored after machining by wet sanding and then polish with abrasive free wax or polish. Click on the picture to view test video. The video will open in a new window.MAX CLR CUT AND POLISHEDVideo will open in a new windowPOLISHINGClick on the picture to view test video. The video will open in a new window. HOW TO POLISH EPOXY COATINGSVideo will open in a new windowDEGLOSSINGOnce the MAX CLR fully cures, deglossing the surface to create a satin finish can be easily done using an abrasive pad.In this demonstration, a SCOTCHBRITE pad was used to de-gloss the surface.Note the dramatic decrease in gloss after a light polishing with the abrasive pad.Very-fine sandpaper (wet-sanding) also works well. PHYSICAL AND MECHANICAL PROPERTIESViscosityDensityForm and Color800 – 1,200 cPS @ 25°C Mixed1.10 g/ccClear Transparent LiquidMix Ratio100 Parts to 50 Parts A By Weight or by Volume 2:1 (Part A to Part B)Working Time45 Minutes @25°C (77°F 100-gram mass)Peak Exotherm70°C (158°F, 100-gram mass)Handle TimeFull Cure Time5.5 Hours36 Hours minimum @ 25°C (75°F)Hardness72± 5 ShoreTee-Peel Strength5.7 Lbs per inch WidthTensile Shear Strength1,300 psi @ 25°C (77°F) 800 psi @ -80°C (-112°F) 550 psi @ 100°C (212°F)Elongation9.0% @ 25°C (77°F)Compressive Strength2,200 psiHeat Distortion Temp80°C (176°F) IMPACT RESISTANCE OF MAX CLR RESIN SYSTEM MAX CLRMAX CLR IMPACT RESISTANCE TESTVideo will open in a new windowHOT WATER IMMERSION TEST WOOD COATED MUGMAX CLR A/B HOT WATER IMMERSION TESTVideo will open in a new window MAX CLR A/B AVAILABLE KIT SIZES24 OUNCE KIThttps://www.ebay.com/itm/22262396319448 OUNCE KIThttps://www.ebay.com/itm/31194732010196 OUNCE KIThttps://www.ebay.com/itm/22262532906896 OUNCE KIThttps://www.ebay.com/itm/2226253382301.5 GALLON KIThttps://www.ebay.com/itm/222626972426 PLEASE CHECK OUT OTHER AVAILABLERESIN SYSTEMS AT OUR eBay STOREFor our complete listing, please Visit our eBay store! DON'T FORGET OUR EPOXY MIXING KITClick The Link To Add To Order https://www.ebay.com/itm/222623932456EVERYTHING YOU NEED TO MEASURE, MIX, DISPENSE OR APPLY Proportioning the correct amount is equally as important to attain the intended cured properties of the resin system.The container in which the epoxy and curing agent is mixed is an important consideration when mixing an epoxy resin system. The container must withstand the tenacity of the chemical and must be free of contamination.Most epoxy curing agent has a degree of corrosivity, as a general practice, protective gloves should be worn when handling chemicals of the same nature. MIXING KIT CONTENTS 1 Each Digital Scale -Durable, Accurate Up To 2000.0 Grams 4 Each 32-ounce (1 Quart) Clear HDPE Plastic Mix Cups4 Each 16-ounce (1 Pint) Clear HDPE Plastic Mix CupsOne Size Fits All Powder-Free Latex Gloves 2 Each Graduated SyringesWooden Stir SticksAssorted Size Foam Brush IMPORTANT NOTICEYour purchase constitutes the acceptance of this disclaimer. Please review before purchasing this product.The user should thoroughly test any proposed use of this product and independently conclude the satisfactory performance in the application. Likewise, if the manner in which this product is used requires government approval or clearance, the user must obtain said approval.The information contained herein is based on data believed to be accurate at the time of publication. Data and parameters cited have been obtained through published information, PolymerProducts and Polymer Composites Inc. laboratories using materials under controlled conditions. Data of this type should not be used for a specification for fabrication and design. It is the user's responsibility to determine this Composites fitness for use.There is no warranty of merchantability for fitness of use, nor any other express implied warranty. The user's exclusive remedy and the manufacturer's liability are limited to refund of the purchase price or replacement of the product within the agreed warranty period. PolymerProducts and its direct representative will not be liable for incidental or consequential damages of any kind. Determination of the suitability of any kind of information or product for the use contemplated by the user, the manner of that use and whether there is any infringement of patents is the sole liability of the user.
Price: 33.3 USD
Location: Ontario, California
End Time: 2023-09-07T22:21:19.000Z
Shipping Cost: 0.72 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Modified Item: No
Country/Region of Manufacture: United States
Custom Bundle: Yes
California Prop 65 Warning: IMPORTANT USAGE INFORMATION POSTED ON THE DESCRIPTION PAGE ----------------------------------------------------------------------------- ●EPA SARA Title III Section 313 above ‘de minimus’ level: None ● ●US. California Safe Drinking Water & Toxic Enforcement Act (Proposition 65): None ● ●US. California Safe Drinking Water & Toxic Enforcement Act (Proposition 65): This product does not contain any chemicals known to the State of California to cause cancer. ● - ●All components of this product are on the TSCA Inventory or are exempt from TSCA Inventory requirements under 40 CFR 720.30● - ●●●For more information go to https://www.p65warnings.ca.gov/●●●
Bundle Listing: Yes
HIGH GLOSS WOOD COATING SEALING BONDING: FDA Compliant For Direct Food Contact
IMPREGNATING RESIN COMPOSITE FABRICS: Lay Up Resin System For Fiberglass, Carbon Fiber,
CRYSTAL CLEAR COLOR STABLE CASTING RESIN: Pen Blanks, Knife Scales, Dome Coating
FOR KAYAK, CANOE, PADDLE BOARD SURFBOARD: Will Not Harm Polystyrene Or EPS Foam
FOR KNIFE SCALE FABRICATING:: High Impact And Shatter Resistant
Manufacturer Part Number: MAX CLR A/B 24 Ounce Kit
Brand: MAX EPOXY RESIN SYSTEMS
Warranty: 30 DAYS FROM DATE OF SHIPMENT
Bundle Description: Weigh the components accurately for food contact applications. Purchase this digital scale with this kit and the shipping cost of the scale is free. https://www.ebay.com/itm/222630300203
