Eurotherm TE10A 25A/480V/0V5/PA/CL Phase Angle Thyristor Power Controller

Description: Eurotherm TE10A 25A/480V/0V5/PA/ENG/-/CL/NOFUSE/-//00 Phase Angle Single Phase Thyristor Power Controller Comes with what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from Eurotherm and may vary slightly due to upgrades, options, or revisions this unit may or may not have. These units are guaranteed to work. They are used. The Unit's Tag Reads: Model Number: TE10A 16A/480V/0V5/PA/ENG/-/CL/NOFUSE/-//00 Power Specifications: 16 A @ 45°C, 480 V, 47 - 63 Hz Input: 0-5 VDC Breakdown by Part Number: Product Type: TE10A Nominal Current: 25 A Nominal Voltage: 480 volts Input: 0 - 5 VDC Firing: Phase Angle Language: English Option: Current Limit Power Specifications: Nominal Current at 45°C: 25 A Nominal Line-to-Line Voltage: 480 VAC, +10%, -15± Supply Frequency: 50 and 60 Hz (±2 Hz) Load: Inductive or temperature dependent loads Power Terminal Block: Cage terminals for 1.5 to 16 mm2 cables. Tightening torque 1.2 Nm. Safety Earth: Screw terminal, same cable gauge as power. Tightening torque 2 Nm. Control Performance Specifications: Control Type: The power controlled in the load is proportional to the setpoint Linearity: Better than ±2% of the full range Stability: Automatic compensation for supply variations from ±10% of the nominal voltage. Stability better than ±2% of the full range with constant resistance Firing Modes: Phase Angle Model: Phase Angle firing varies the thyristors firing angle. Current limit is installed as an option. Control Specifications: Input Signal: Analog, DC voltage or current: 0-5 V Voltage Input Impedance: 100 kΩ, current input impedance: 250 Ω Local Control: 10 kΩ external potentiometer, a '5V user' voltage is available Contacts: Contacts for On/Off logic operation Control Terminals: Plug-in connector (0.5 to 1.5 mm2 cables), Tightening torque 0.4 Nm European Directives: Electromagnetic Compatibility: Immunity Test Standards: EN 61000-4-2, EN 61000-4-4, EN 61000-4-5, ENV 50140, ENV 50141, ENV 50204 Emission Test Standard: EN 55011 (with external filter for Phase Angle firing model) Electrical Safety: Complies with the Low Voltage Directive 73/23/EEC amended by the Directive 93/68/EEC (product installed and used in compliance with its user manual) CE Marking: TE10A products carry the CE mark in compliance with the European Low Voltage Directive. Environment Specifications: Temperature: Operating: 0 to 45°C (up to 60°C with derating). Storage: -10 to +70°C Pollution: Overvoltage category 2, Degree of pollution 2 (IEC 664). Electrically conductive pollution must be excluded from the cabinet in which this controller is mounted. THis product is not suitable for use above 2000 m or in corrosive or explosive atmospheres without further protection. Humidity: Relative Humidity, 5 to 95%, non-condensing and non-streaming Protection Degree: IP20 (in accordance with IEC 529; 11.4, table 5), Isolation distances comply with IEC 664 Isolation (1 Minute Test): Between power and earth; 2000 VAC. Between power and control inputs; 3600 VAC Cooling: Natural convection Dimensions: 115 mm H x 92.5 mm D x 70 mm W Weight: 700 g Mounting: Vertical on DIN rail (reference EN50022-35x7.5 or 35x15). Allow at least 10 mm between units. For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a $5.00 minimum for packaging, handling, and order processing. International shipping to be determined by destination. Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.: (1) Are you the end-user of this item? (2) If you are not the ultimate end-user of the item, please state the ultimate end user's name. (3) What is the ultimate country destination? 09/10/12

Price: 199.99 USD

Location: Phoenix, Arizona

End Time: 2024-11-29T23:27:11.000Z

Shipping Cost: N/A USD