EVAP Smoke Machine w Air Pump Pipe System Pressure Gauge Tester Leakage Detector

Description: Autory Car Smoke Leak Detector, Pipe Leak Locator, Smoke Leakage Diagnostic Analyzer Detector, for Motorcycles Automotive EVAP System Autory Car Smoke Leak Detector is a professional auto pipe leak detect tool. It will help us position cars motorcycles leakage on pipe system quickly and exactly. Such as: Intake System Test, Exhaust Systems Test, Car Sealing Test, Fuel Tank System Test. Advanced Technology It works on the EVAP system. (Provided with another version that specially designed for EVAP system). Equipped with dual flow meters for accurate data display & Independently controlled Air mode and Smoke mode. There is no need to worry about damaging the EVAP system. Sea of Smoke Equipped with a built-in air pump, when connecting the detector with DC12V battery, it can output lots of smoke within 30 seconds after turning on. Over-heat & Anti-frost Protection This smoke detector has an intelligent protector that automatically shuts off the power if the working limit is exceeded, for example over 75℃, to ensure the safety of the operator and the equipment. Product Parameter Input Voltage: DC12V Output Pressure: ≤15PSI (≈1kg) Output Smoke Flow: 1~6L/min Package Size: 360 * 320 * 240mm (14.17 * 12.59 * 9.45 inches) Weight: 4.2 kg 9.9 pounds Wide-ranged Application The pipe fuel leakage detector is designed for detecting the leakage of pipes systems on cars, motorcycles, snowmobiles, off-road vehicles, ATV, light trucks & speedboats, such as fuel pipe, cooling tank, intake system, exhaust system & EVAP system. Accessories Air Pressure Output: Built-In Air Pump Dual Modes: Smoke Mode & Air Mode Test Oil: Mineral Oil or Baby Oil Multi Protections: Oil Outlet, Over-Heat and Over-Load Protection Instruction & Caution HOW TO USE? 1. Fill 10ml baby oil to the detector for the first time. Open the engine cover, and hang the detector in the cover. 2. Disconnect the pipe that needs to be connected with detector. 3. Connect detector with DC12V battery, turn on the power switch, and the detector starts to work. 4. In about 30 seconds, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary. CAUTIONS: 1. When you use this Autory Standard version Car Smoke Leak Detector for the first time, fill with 20ml oil . Please be careful NOT to beyond this range. 2. The testing liquid : both liquid paraffin and baby oil are OK. 3. Fresh oil can be filled with only when the smoke gets thin, and it can't be filled over 20ml each time. 4. Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly. 5. During the process of leak detection, please keep away from smoke-sensitive parts. 6. Do NOT run the detector over 8 minutes continuously. It needs interval rest. 7. The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later. 8. The round part of this detector has temperature, please be careful to avoid burns. 9. If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple. Package Content: 1pc * Autory Car Smoke Leak Detector Main Unit 1pc * Hook (with hand-tighten nuts) 1pc * Rubber Connect Parts 1sets * Hard Rubber Hose Plug (with serial specification) 1sets * Soft Rubber Hose Plug (with serial specification) 1pc * Standard Cone Adapter 1pc * Universal Airbag Adapter 1pc * Power Cord Clamp 1pc * Valve Core Wrench 1pc * Test Oil Refill Bottle(oil not included) 1pc * EVAP Special Connector 1pc * Smoke Hose 1pc * User Manual

Price: 211.95 USD

Location: shenzhen

End Time: 2024-08-04T03:09:29.000Z

Shipping Cost: 0 USD