F137N: LONG NIPPLE VALVE WITH 12MM-1.75 THREADS WITH LEVER CLIP

Description: F137N: LONG NIPPLE VALVE WITH 12MM-1.75 THREADS WITH LEVER CLIPOur new Fumoto Standard Valves have a larger body with a 60% larger drain, allowing for faster oil changes compared to the smaller body models for the same thread size.The Standard with nipple Valve is often better suited for industrial engines and equipment, it is also perfect for direct hose application.IMPORTANT NOTE: The FN series are NOT RECOMMENDED for engines with low ground clearance.The Fumoto Engine Oil Drain's spring assisted ball valve replaces your standard issue oil drain plug and makes oil changes easier, cleaner, and less time consuming. Benefits of installing Fumoto valve include:One Touch OperationClean and mess free oil changesAvoids contacting hot oilEliminates stripped threads and frozen plugsIdeal for sampling analysisIncorporating Fumoto's most compact ball valve, Fumoto's F series valves are designed to fit cars, light trucks, vans, and select commercial engines. Constructed of forged brass and stainless steel to exacting Japanese specifications, F-series valves are designed to provide a lifetime of dependable and reliable service.InstallationRemove original drain plug and drain oil into appropriate receptacle.Insert Engine Oil Drain Valve and gasket into drain plug port and tighten.Make sure valve is closed and refill crankcase.*A good rule of thumb is to install the valve by hand and then tighten an additional 1/8 - 1/4 turn with a wrench on the body. Do not over tighten.**Some oil pans are designed with a recessed drain hole which may prevent the valve from being installed properly. If the valve cannot be tightened all the way without hitting the oil pan wall, do not install the Drain Valve on your vehicle. Adapters are available for some models.OperationTo open lift control lever and turn counter-clockwise 90 degrees.To close simply turn the lever clockwise 90 degrees until locked in original position.SafetyDrive carefully at all times, and if you run over any foreign object on the road pull over and check the valve for any damage or leak. N-Series valve (with nipple to accept hose) is not recommended for passenger cars with low clearance.NOTE: The FN series are NOT RECOMMENDED for engines with low ground clearance.Lifetime Limited WarrantyWe offer a LIFETIME LIMITED WARRANTY on its product, against faulty workmanship and/or material to the original purchaser (with proof of purchase). For any defective product, FUMOTO will replace the product at no charge. This warranty does not cover any damages due to misuse, abuse, negligence or accident. This warranty is valid only in the United States.Vehicle ChartTo use our size chart, visit us at FUMOTO ONLINE STORE. For California Customers:WARNING Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Price: 36.95 USD

Location: Santa Rosa, California

End Time: 2024-11-12T16:17:55.000Z

Shipping Cost: 5 USD