Fit 2020-2023 GMC Sierra 2500HD/3500HD Hooke Road Front Rear Bumper w/ LED Light

Description: Fit 2020-2023 GMC Sierra 2500HD/3500HD Hooke Road Front Rear Bumper w/ LED LightType 1 Front Bumper3-piece modular designDecorated with a hollowed-out honeycomb steel plate2×18W LED square spotlights includedAccommodated with a 22" Straight LED Light Bar(LED Light Bar Not Included)Equipped with a license plate mounting bracketRetains factory tow hooksNot compatible with proximity sensorsHeavy-duty, high tensile 11-gauge(1/8 inch) steel for the bumper main bodyTextured black powder coat finish & Premium E-coating process insideBumper weight: about 90 lbsBolt-on installation w/ clear instructionType 2 Front Bumper3-piece modular design. Aggressive off-road styling w/ a low-profile grille hoop.Feature high strength D-ring mounts. D-rings not included.2×18w LED flush mount spotlights included.Adjustable mounting brackets that accommodate LED straight light bars(Not Included) range from 12" to 23.5"Built-in winch plate that rated up to 12,000 poundsEquipped with a license plate mounting bracketNot compatible with proximity sensorsHeavy-duty, high tensile 11-gauge(1/8 inch) steel for the bumper main body, 7-gauge(3/16 inch) steel for the winch plateTextured black powder coat finish & Premium E-coating process insideBumper weight: about 110 lbsDirect bolt-on installation. No drilling is required.Type 3 Front Bumper3-piece modular designDecorated with a hollowed-out honeycomb steel plate2×18W LED square spotlights IncludedAccommodated with a 22" Straight LED Light Bar(LED Light Bar Not Included)Equipped with a license plate mounting bracketFeatures a solid skid plateRetains factory tow hooksNot compatible with proximity sensorsHeavy-duty, high tensile 11-gauge(1/8 inch) steel for the bumper main bodyTextured black powder coat finish & Premium E-coating process insideBumper weight: about 83 lbsSimple bolt-on installation.Type 1 Rear Bumper3-piece modular design. Provides stylish and functional rear-end protection.Features high strength D-ring mounts. D-rings are not included.Includes a license plate light and 2×18w LED floodlights License plate placing plane and mounting holes includedPre-cutouts for trailer connectorRetains factory receiver hitch Not compatible with factory backup sensorsIntegrated center and side steps for convenient access to truck bedHeavy-duty, high tensile 11-gauge(1/8 inch) steel for the bumper main bodyTextured black powder coat finish & Premium E-coating process insideBumper weight: about 74 lbsSimple bolt-on installation Type 2 Rear Bumper3-piece modular design. Provides excellent rear-end protection.Includes a license plate light and 2×18w LED floodlights License plate placing plane and mounting holes includedPre-cutouts for trailer connectorRetains factory receiver hitch Not compatible with factory backup sensorsIntegrated center and side steps for convenient access to truck bedHeavy-duty, high tensile 11-gauge(1/8 inch) steel for the bumper main bodyTextured black powder coat finish & Premium E-coating process insideBumper weight: about 61 lbsSimple bolt-on installation Fitment:2020-2023 GMC Sierra 2500HD 3500HD Models Common Features Enhances Style and Protection. Make your truck’s look more captivating by adding this Hooke Road Bumper with a Fine Textured Black finish. This bumper exhibits a unique build and gives an aggressive vibe with its all-black coating. Furthermore, the bumper does an excellent job of safeguarding your truck’s components against the damaging effects of various road hazards. High-Strength Construction. For superior toughness and long-lasting durability, this bumper is manufactured using 11-gauge flat steel. This high-strength material gives the bumper an impact-resistant build, allowing it to endure the harshness of the rugged trail. What’s more, it is applied with a fine-textured black finish to increase its protection against weathering, rust, and corrosion. Direct-Fit Installation. The installation process for this bumper is straightforward and doesn't require any drilling or cutting. Basic hand tools are all that's needed. Firstly, remove the factory bumper, and then assemble the components needed to install the new bumper. Next, attach the rear bumper onto the vehicle's frame while keeping the bolts loose. Finally, adjust the bumper's position and tighten all the bolts. The entire installation process can be completed within approximately 2 hours, making it quick and easy.Item Include(Decided on what you purchased, each choice only include one bumper)Front or Rear BumperMounting HardwareInstallation InstructionDELIVERY DETAILSPAYMENTABOUT RETURNABOUT USCONTACT USDELIVERY DETAILSNormally, your package will be handed to USPS/FedEx by 2 workdays, and the following delivery could take 1-10 day(s).Ourwarehouses are in CA/NJ, US. Your package will be shipped from the nearest warehouse which has stock. During the epidemic situation, information of logistics updated as well as deliveries could be delayed caused by lack of man power from logistics company. If the logistics information shows "Shipment information sent to XXX", your package has been handed to the logistics personnel. Please be patient or contact us for further information.PAYMENTWe accept Paypal, Visa, Mastercard, Apple Pay, Google Pay, American Express etc. ABOUT RETURNWe provide 30 days return guarantee for all items that we sold. But please contact us first. We will be happy to exchange or refund. All returned products must be in original condition and packaging. Please take some pictures of the product to us before sending out. Unfortunately, if products have been assembled or modified, we cannot take them as returns. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit. Refund will only be issued upon our receipt of the returned parcel.If the product was damaged on the return shipping way, we can only offer partial refund.ABOUT USWe are the authorized dealer of the "Hooke Road®" brand.The Hooke Road Brand has been certified as a member of SEMA. We have our own factory and design team. We make all kinds of specialty parts and accessories to make vehicles more attractive, more unique, more convenient, faster, safer, more fun and even like-new again. Wish you have a terrific off-road experience with our products.CONTACT USPlease contact us via eBay message. All E-mail will be replied within 24 Hours in working days or 48 hours on weekend.If you are satisfied with your purchase, please leave us 5 Star Ratings and Positive Feedback. It will be highly appreciated! Warm Prompt: If you have any problems with this order/item, such as items not being received on time or packages being damaged, please contact us firstly. We will give you a satisfactory solution.

Price: 399.99 USD

Location: Ontario, California

End Time: 2024-12-21T16:56:19.000Z

Shipping Cost: 0 USD