Flysky Fs-I6X 10CH Radio Transmitter and Receiver Fs-Ia10B 2.4G RC Controller fo

Description: 1）Multi-channel Hopping Frequency --- This system bandwidth ranges from 2.408GHz to 2.475GHz. This is divided in 135 channels. Each transmitter hops between 16 channels (English version) in order to reduce interference from other transmitters.2) Unique ID Recgnition System --- Each transmitter and receiver has it's own unique ID. Once the transmitter and receiver have been paired, they will only communicate with each other, preventing other systems accidentally connecting to or interfering with the systems operation.3) Bidirectional Communication --- Capable of sending and receiving data, each transmitter is capable of receiving data from temperature, altitude and many other types of sensors, servo calibration and i-BUS Support.4)Omni-directional Gain Antenna --- The high efficiency Omni-directional high gain antenna cuts down on interference, while using less power and maintaining a strong reliable connection.5) Low Power Consumption --- The system is built using highly sensitive low power consumption components, maintaining high receiver sensitivity, while consuming as little as one tenth the power of a standard FM system, dramatically extending battery life. Product Description FS-i6X 10-Channel RC Transmitter and FS-iA10B Receiver The FS-I6X and FS-iA10B connect so well that you do not need to make new connections when you receive them. In normal use, there is no need to connect the "bundle cable". If bonding with other FS-iA10B receivers, you can do the following. 1, Connect the included binding cable to the receiver's B/VCC port. 2, Plug the DC 4V-6.5V power supply into other ports, the positive and negative poles cannot be wrongly connected. 3, Keep pressing the "BIND KEY", and then turn on the transmitter to enter the binding mode. 4, The transmitter will display the RX voltage, that means the binding is successful. 5, Remove binding wire, Check the operation of the servos. If something doesn't work as expected, start this process from the beginning. > DTXMX Flysky FS-i6X is a transmitter built for fixed-wing / glider / helicopter models. Can also support RC Quadcopter/Car/Boat, even if these icons are not in the menu. It features the AFHDS2A and AFHDS protocol, support for up to 10 Channels through DIY upgrades, and is compatible with many ST*** RC Simulators via USB. [RC simulator software purchased separately] > Supports 10-channel and auxiliary channel customization 10-Channel Auxiliary switches On Press the 'OK' button for 2 seconds to enter the menu. [System setup-Aux switches], set SwA SwB SwC SwD to On, Ch:10, then press 'CANCH' button for 2 seconds to save. Auxiliary channels customization Press the OK button for 2 seconds to enter the menu, [Functions setup-Aux. channels], Assigning the switches to the channels, Then press the 'CANCH' button for 2 seconds to save. Channel display 10 Channel auxiliary switch On, auxiliary channel customization, after saving the settings. In the Channel display you can see the Servo volume status bar Package Included: 1X FS-i6X Transmitter 1X FS-iA10B Receiver 1X Bind plug 1X Upgrade Cable * Delivered without batteries Description: Item: FS-i6X RC Transmitter Channels: 6-10CH (Default 6ch) Model Type: Fixed-Wing/Glider/Helicopter, Can support RC quadcopter/car/boat even if these icons are not in the menu. RF Range: 2.408-2.475GHz RF Power: <20dBm RF Channel: 135 Bandwidth: 500KHz 2.4GHz System: AFHDS 2A / AFDHS Modulation Type: GFSK Stick Resolution: 4096 Low Voltage Warning: <4.2V DSC port: PS/2 Port PPM Chargeable: No Antenna Length: 26mm (Dual Antenna) Weight: 392g Power: 6V DC,4 * AA battery (NOT included) Display: STNTransflective Display, LCD 128x64 Lattice, VA 73x39mm, LCD with white backlight Size: 174x89x190mm On-line Update: Yes [Upgrade cable purchased separately] Color: Black Certificate: CE0678, FCC ID: N4ZFLYSKYI6X Joystick mode: mode 2 [ left hand throttle, push the left joystick up and down, will not automatically rebound to the center ] FS-iA10B Specifications: Item: FS-iA10B Receiver Channels: 10 2.4GHz System: AFHDS 2A Model Type: Fixed-Wing/Glider/Helicopter/Quadcopter/Car/Boat RF Range: 2.4055-2.475GHz RF Receiver Sensitivity: -105dBm Bandwidth: 500KHz Modulation Type: GFSK Power: 4.2-6.5V DC Antenna Length:26mm (Dual Antenna) Weight: 19.3g Size: 50.6*34.9*14.9mm i-BUS Port: Yes Data Acquisition Port: Yes Color: Black Certificate: CE0678,FCC

Price: 93.99 USD

Location: Pendergrass, Georgia

End Time: 2024-12-12T13:20:01.000Z

Shipping Cost: 0 USD