For Honda CRF1000L Africa Twin Motorcycle Front Fender Kits Mudguard Raiser

Description: FITMENT NOTES: There is a change to the routing of the brake lines mid-2018 which is not compatible with this riser as there is not enough play in the brake lines to cover the rise in height of the fender. If your brake lines are routed and mounted to the fender, as shown in the image, this riser will not be compatible with your bike. Description: Glossy Black Stainless steel hardware included Simple 5 minute installation Keeps mud and debris from collecting Does not require brake line tampering such as bleeding brakes Compatible with ABS and non-ABS models Compatible with Adventure Sports The Fact: The 'Africa Twin' is a motorcycle designed to tackle any terrain, from sand and dirt to thick, slick mud. However, all that mud and debris can quickly become packed between the front wheel and Africa Twin’s low front fender. This High Fender Riser Kit eliminates that issue by giving the Africa Twin’s fender the clearance it needs to truly tackle every type of off-road terrain. Crafted from 304 stainless steel, our simple-to-install fender riser kit lifts the fender 21 mm higher than the stock position. This height difference can prevent serious accidents, such as an endo or highside caused by a stop in rotation of the front wheel. Even more troublesome, a lack of wheel rotation may result in the fender and brake lines being ripped off the bike, causing a loss of front braking power. These prevent movement of the rear edge of the fender and loosening of the hardware. Our design uses countersunk screws in strategic locations to lessen the stress and interference with the stock plastics. Each mounting bracket is a single piece of stainless steel, with no spot welds to break. Fitment: For Honda CRF1000L Africa Twin 2016-2019 For Honda CRF1000L Africa Twin Adventure Sports 2018-2019

Price: 37.51 USD

Location: Guangzhou,Guangdong

End Time: 2024-02-15T02:37:11.000Z

Shipping Cost: 0 USD