GRBL 2Axis 32bits Stepper Motor Driver Controller For CNC Router Laser Engraver

Description: ● There are two types of this control board, universal type and 4540 type. Among them, the 4540 type is equipped with a gyroscope, which ● There are two types of this control board, universal type and 4540 type. Among them, the 4540 type is equipped with a gyroscope, which can detect the movement of the machine. ● This control board is a 32-bit MCU control board, which runs faster, the maximum no-load speed reaches 40000mm/min, the algorithm is optimized better, the vibration of the machine is smaller when the machine moves at high speed, and the performance is more stable; ● Using the Type-C USB interface, it is more convenient to use and the data transmission is more stable; ● One-piece integrated drive ● PWM output frequency 10kHz, higher engraving precision and clearer details ● Y-axis dual drive, stronger drive capability; ● Support USB automatic identification, when plugged in USB and connected to the computer, the offline interface is automatically shielded to avoid offline interference with data; ● 5V power output port, and software controllable, easy to expand various functions; ● Support USB flash firmware, firmware upgrade is more convenient; ● XY limit switch interface each ● Self-contained laser anti-burn mode, laser S value >=100, after the laser is turned on, if there is no movement within 5S, an alarm will occur ● Type 4540 - with a gyroscope module that can detect the movement of the machine during the engraving process, preventing someone from moving the machine Packing list: 1*Control board 1*USB tpye-c cable

Price: 24.17 USD

Location: zhengzhou

End Time: 2023-12-17T09:05:16.000Z

Shipping Cost: 0 USD