GSC Power Division 2011-8 Exhaust Valve 32mm For the Subaru EJ20 EJ257 Turbo NEW

Description: Fitment and Product Information: GSC Power Division 2011-8 Exhaust Valve 32mm For the Subaru EJ20 EJ257 TurboBrandname: GSC Power Division Part Number: 2011-8 Product Details: When creating our new valve line we set out to create the best performance, longest lasting valves available to the aftermarket. Using advanced 3D design and simulation software, we have created a stronger and higher flowing valve head design. We flow test prototype valve heads in the specific applications to make sure we have the highest flowing valve head available on the market today. With the materials used, we have less valve distortion at the face than any of the tested designs. Less distortion allows for better sealing under extreme conditions and more consistent performance throughout the life of the valve. GSC Power-Division's new valves are sure to become the industry standard for sport compact performance valves.Specs:Stem Diameter (mm)Overall Length (mm)Head Diameter (mm)6.0104.3732.00Valve FeaturesSwirl polished heads for smoother air flow over the valveBack cut to reduce valve weight for higher RPM, higher boost pressure, and allow for more aggressive cam profiles without increasing valve spring seat pressuresValve stems are micro polished to allow for less oil retention on the stem, which creates less drag on the stem to guide for a smoother motionIntake valves are a modified 21-4n stainless and exhausts are a modified 23-8n stainless material for high heat capacity while maintaining longevityValve tips are either hardened or have a stelite wafer tip fused so that the tip is within 5 Rockwell C of the rocker or valve tappet for extended life and less wearValve tip lengths - we have taken extra time to adjust tip heights on the applications to require less tipping of the valve, to maintain proper tip height for proper valve train geometry, and to cut down on install times when setting valve lashWe have also adjusted the keeper groove to properly balance intake and exhaust spring pressures to reduce the use of valve spring shims and maximize performance from our spring and retainer kitsValves will work with an Original Manufacturer keeper/lock or, when available, our upgraded keeper/lock. It is not mandatory, but it is suggested, that any valve lock not be reused on performance applications due to material grooving The Wundercarparts 90 Day Warranty: Wundercarparts offers a 90 day warranty against manufacturer defects on all items we sell! Additionally, most new items come with a seperate manufacturer warranty. Please message us through eBay for further information on manufacturer warranty, or to start a warranty claim. WARNING: This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Price: 146.02 USD

Location: United States

End Time: 2024-11-13T20:00:18.000Z

Shipping Cost: 0 USD