Harley Davidson Rocker Arm Cover Gaskets - Panhead Part # RG-17541-48 Silicone

Description: Rocker Arm Cover Gaskets - SILICONE for Harley Davidson Pan Head Motorcycles - Our silicone rubber gaskets are made from aerospace mechanical grade AMS silicone and designed to withstand temperatures up to 400 degrees Fahrenheit. - Therefore, they will not break down and deform or crack up like cork or neoprene. - Our gaskets seal uneven and warped surfaces, and eliminate corrosion. - Gaskets are 100% reusable. Fits: Harley Davidson Pan Head Motorcycles 1948 - 1965; FL, FLH Part #: RG-17541-48 Corresponding part numbers: OEM 17541-48; HD-1-S/2 Set of 2 silicone gaskets Gaskets are 1/8" thick Eliminates spacer Re-usable gaskets These gaskets are also made in black silicone. (See RG-17541-48B) INSTALLATION INSTRUCTIONS: Wash the cover and engine flange with solvent. The surfaces must be DRY—no oil or lube of any type. Remove all traces of oil from the rocker box covers. Install gasket DRY. TORQUE SPECIFICATIONS: Use lock washers or thread lock and TORQUE (one time): 20 to 25 INCH POUNDS ** DO NOT OVERTIGHTEN. ** Over tightening causes the gasket to bulge or squeeze out. ** If the gasket starts to bulge or "pooch" out when torquing - then you are over tightening the gasket. Back off on the torque. If the gasket splits or cracks at the bolt holes then you have over torqued the silicone material and ruined the gasket. You must follow the recommended torque listed on the package. Tighter is not better. It is okay to use Loctite on the bolts.** TO REUSE GASKET: Wash gasket BRIEFLY in hot water and soap. Rinse well and dry thoroughly. Re-install using the above installation instructions. PROUDLY MADE IN THE USA. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ USE CORK? GET REAL! REAL Gaskets that is… REAL Gaskets Tennessee is a manufacturer of silicone rubber gaskets for aircraft, automobile, and motorcycle engines. Our silicone rubber gaskets are made from aerospace mechanical grade AMS silicone, designed to withstand temperatures up to 400 degrees Fahrenheit and to last the life of the engine. Our gaskets seal uneven surfaces, eliminate corrosion and are 100% reusable. We manufacture valve cover gaskets for: Aircraft: Continental, Franklin, Lycoming, Pratt & Whitney and Wright radial piston aircraft engines. Automobiles: Ford, GM, Mopar, Porsche and VW automobile engines. Motorcycles: BMW, Harley-Davidson, Suzuki, BSA, Ducati, Moto Guzzi, Norton, Triumph, Saab and most other motorcycle engines. If you are tired of oil leaks, then a silicone rubber gasket is the only way to go, and REAL Gaskets Tennessee is the only place you can get “The Original” silicone rubber gasket. MADE IN THE USA.

Price: 27 USD

Location: Elizabethton, Tennessee

End Time: 2024-01-22T19:10:14.000Z

Shipping Cost: 11.95 USD