Description: HC-SR04 Plus Ultrasonic Sensor Module HC-SR04+ for Arduino Ultrasonic Distance Measuring Board 3.3V 3.5V Electronic DIY PCB Product introduction: The HC-SR04+ is a wide voltage operation ultrasonic ranging module. The module's external dimensions and software are fully compatible with the old version of the HC-SR04; it can be seamlessly switched with the old version of the HC-SR04. The minimum operating voltage of the address 3V allows it to be directly connected to a 3.3V powered MCU. Features Detection angle is less than 15 degrees Industrial MCUs Working temperature -20~80 degrees Celsius Detection distance: 5V 2cm~450cm; 3.3V 2cm~400cm Wide Voltage Operation: 3V-5.5V Full Compatibility with HC-SR04 Software and Hardware Dimensions Board connection mode, VCC, trig (control end) Echo (receiver end) Out (empty pin, GND) Note: The TRIP pin is an internal pull-up resistor of 10K. Use the IO port of the microcontroller to pull the TRIP pin low and then give a pulse signal of more than 10us. The Out foot is a switch output pin when the module is used as a theft protection module. The distance measurement module does not use this foot! Note: The module should be plugged in on the circuit board to be powered on to avoid high level of malfunction. If it is generated, re-power can be solved.
Price: 3.71 USD
Location: shenzhen
End Time: 2024-10-12T03:46:14.000Z
Shipping Cost: 2.99 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Expiration Date: N/A
Shield: Unshielded
Output Type: N/A
UPC: Does not apply
MPN: Does not apply
Contact Form: N/A
California Prop 65 Warning: No
Brand: Unbranded
Current Type: N/A
Unit Type: Unit
Termination Type: N/A
Sensor Type: Electromechanical
Compatible Mounting Type: N/A
Country/Region of Manufacture: China
Unit Quantity: 1
