Hellwig 991 EZ-990 Helper Spring Kit for 63-13 Chevrolet G10/1972-2006 GMC G1500

Description: $162.01 EZ-990™ Rear Helper Springs by Hellwig®. Quantity: 2 per Pack. Due to clearance issues on your car the springs are add to the top of the factory spring pack so the factory bump stop is retained. New axle U-bolts are center bolts are provided for the springs. Once installed you can adjust the Hellwig Springs to provide the desired amount of load support. Once you set them no further adjustment is required. The Hellwig Helper Spring is easily installed using common hand tools with no drilling required. Keep in mind, adding helper springs Does Not increase the factory GVWR rating. Crafted from heat-treated ASTM 5160 alloy spring steel for maximum strength and resilience, these feature a spring rate that becomes firmer as pressure increases. Recommended for occasional towing needs such as boats or trailers, these maintain proper rear ride height, prevent original springs from sagging due to sustained load compression, and help reduce bouncing during towing. These add the ability to be adjusted independently when carrying uneven side-to-side loads. Fitted U-bolts and related hardware are included for mounting. Drilling may be required. In stock EZ-990™ Rear Helper Springs by Hellwig®. Quantity: 2 per Pack. Due to clearance issues on your car the springs are add to the top of the factory spring pack so the factory bump stop is retained. New axle U-bolts are center bolts are provided for the springs. Once installed you can adjust the Hellwig Springs to provide the desired amount of load support. Once you set them no further adjustment is required. The Hellwig Helper Spring is easily installed using common hand tools with no drilling required. Keep in mind, adding helper springs Does Not increase the factory GVWR rating. Crafted from heat-treated ASTM 5160 alloy spring steel for maximum strength and resilience, these feature a spring rate that becomes firmer as pressure increases. Recommended for occasional towing needs such as boats or trailers, these maintain proper rear ride height, prevent original springs from sagging due to sustained load compression, and help reduce bouncing during towing. These add the ability to be adjusted independently when carrying uneven side-to-side loads. Fitted U-bolts and related hardware are included for mounting. Drilling may be required. Shop by Category ... Kits Suspension Parts Stabilizers Shock Absorbers Skid Plates Lighting Accessories Kits Suspension Parts Stabilizers Shock Absorbers Skid Plates Lighting Accessories DON'T KNOW WHERE TO START? Contact us using eBay messages We will help you find the right lift kit for your Truck, Jeep or SUV. We install everything we sell!!! Hellwig 991 EZ-990 Helper Spring KitDescriptionHellwig 991 EZ-990 Helper Spring Kit EZ-990™ Rear Helper Springs by Hellwig®. Quantity: 2 per Pack. Due to clearance issues on your car the springs are add to the top of the factory spring pack so the factory bump stop is retained. New axle U-bolts are center bolts are provided for the springs. Once installed you can adjust the Hellwig Springs to provide the desired amount of load support. Once you set them no further adjustment is required. The Hellwig Helper Spring is easily installed using common hand tools with no drilling required. Keep in mind, adding helper springs Does Not increase the factory GVWR rating. Crafted from heat-treated ASTM 5160 alloy spring steel for maximum strength and resilience, these feature a spring rate that becomes firmer as pressure increases. Recommended for occasional towing needs such as boats or trailers, these maintain proper rear ride height, prevent original springs from sagging due to sustained load compression, and help reduce bouncing during towing. These add the ability to be adjusted independently when carrying uneven side-to-side loads. Fitted U-bolts and related hardware are included for mounting. Drilling may be required.Features Set of secondary leaf springs designed to work with OEM leaf springs and support extra loads Offer the ability to be adjusted independently to support uneven side-to-side loads Mounts under factory axle U-bolt plates Recommended for occasional towing needs such as boats or trailers Fitted U-bolts and related hardware are included for mounting Crafted from heat-treated ASTM 5160 alloy spring steel for maximum strength and resilience Prevents leaf spring from sagging due to sustained load compression Reduces leaf spring wrap up, bottoming out, and loss of cornering traction Helps reduce bouncing during towing Drilling may be required for installation Manufactured in the United States ComponentsSee DirectonsFitment Years Drive Make Model 2016-2017 4WD Nissan Titan XD Fitment Notes 70-03 Dodge B100, B150 (Install Kit Required in addition to spring kit for LP-25 and LP-35 only) 70-03 Dodge B200, B300, B400 (Install Kit Required in addition to spring kit for LP-25 and LP-35 only) 70-93 Dodge D100 Pickup Fits Vehicles Only 2WD (For air bags on lifted vehicles using a non-tapered lift block, use P/N 4822 spacer for a 2"" rear lift and P/N 4824 spacer for a 4"" rear lift) 70-93 Dodge W150 Pickup Fits Vehicles Only 4WD (Install Kit Required in addition to spring kit for LP-25 and LP-35 only) (For air bags on lifted vehicles using a non-tapered lift block, use P/N 4822 spacer for a 2"" rear lift and P/N 4824 spacer for a 4"" rear lift) 66-96 Ford Bronco (not Bronco II) (Install Kit Required in addition to spring kit for LP-25 and LP-35 only) 75-14 Ford E150 Van (Install Kit Required in addition to spring kit for LP-25 and LP-35 only) 65-72 Ford F100 Fits Vehicles Only 2WD (For air bags on lifted vehicles using a non-tapered lift block, use P/N 4822 spacer for a 2"" rear lift and P/N 4824 spacer for a 4"" rear lift) 67-72 Ford F100 Fits Vehicles Only 4WD (Install Kit Required in addition to spring kit for LP-25 and LP-35 only) (For air bags on lifted vehicles using a non-tapered lift block, use P/N 4822 spacer for a 2"" rear lift and P/N 4824 spacer for a 4"" rear lift) 73-96 Ford F100, F150 Fits Vehicles 2WD/4WD (Install Kit Required in addition to spring kit for LP-25 and LP-35 only) (For air bags on lifted vehicles using a non-tapered lift block, use P/N 4822 spacer for a 2"" rear lift and P/N 4824 spacer for a 4"" rear lift) 97-03 Ford F150 Fits Vehicles 2WD/4WD (except SuperCrew) (Install Kit Required in addition to spring kit for LP-25 and LP-35 only) 2004 Ford F150 Fits Vehicles 2WD/4WD Heritage Edition (Install Kit Required in addition to spring kit for LP-25 and LP-35 only) 65-72 Ford F250 Fits Vehicles Only 2WD (For air bags on lifted vehicles using a non-tapered lift block, use P/N 4822 spacer for a 2"" rear lift and P/N 4824 spacer for a 4"" rear lift) 63-72 GM C10 Pickup Fits Vehicles Only 2WD w/ Rear Leaf Springs (For air bags on lifted vehicles using a non-tapered lift block, use P/N 4822 spacer for a 2"" rear lift and P/N 4824 spacer for a 4"" rear lift) 67-72 GM K10 Pickup Fits Vehicles Only 4WD (Install Kit Required in addition to spring kit for LP-25 and LP-35 only) (For air bags on lifted vehicles using a non-tapered lift block, use P/N 4822 spacer for a 2"" rear lift and P/N 4824 spacer for a 4"" rear lift) 73-87 GM C10, K10 Pickup Fits Vehicles 2WD/4WD (Install Kit Required in addition to spring kit for LP-25 and LP-35 only) (For air bags on lifted vehicles using a non-tapered lift block, use P/N 4822 spacer for a 2"" rear lift and P/N 4824 spacer for a 4"" rear lift) 63-72 GM C20 Pickup Fits Vehicles Only 2WD w/ Rear Leaf Springs (For air bags on lifted vehicles using a non-tapered lift block, use P/N 4822 spacer for a 2"" rear lift and P/N 4824 spacer for a 4"" rear lift) 67-72 GM K20 Pickup and Suburban Fits Vehicles Only 4WD (Install Kit Required in addition to spring kit for LP-25 and LP-35 only) (For air bags on lifted vehicles using a non-tapered lift block, use P/N 4822 spacer for a 2"" rear lift and P/N 4824 spacer for a 4"" rear lift) 72-06 GM G10-G1500 Van Fits Vehicles w/o Rear A/C (Install Kit Required in addition to spring kit for LP-25 and LP-35 only) 67-72 GM Suburban Fits Vehicles 2WD/4WD (Install Kit Required in addition to spring kit for LP-25 and LP-35 only) 73-87 GM Suburban, Blazer Fits Vehicles 2WD/4WD w/o Rear A/C (Install Kit Required in addition to spring kit for LP-25 and LP-35 only) 88-00 GM Suburban, Blazer, Tahoe, Yukon Fits Vehicles 2WD/4WD w/o Rear A/C (Install Kit Required in addition to spring kit for LP-25 and LP-35 only) Please note: We are a "Ma/Pa" brick & mortar suspension shop currently accepting Paypal, cash in person and all major credit cards by phone. If you have questions or need technical support, upgrades or accessories we can be reached most times through eBay. **SHIPPING TO , AND REQUIRE ADDITIONAL SHIPPING. Get in touch with us using eBay messages for a shipping quote We accept Paypal or connect with us through eBay for alternate payment methods

Price: 162.01 USD

Location: Visalia, California

End Time: 2024-12-15T08:28:59.000Z

Shipping Cost: 0 USD