Description: If you have found this and wonder if these are the keying cables and interface you need for your Hermes Lite 2 to SAFELY key your XPA-125B, this is the right one to buy!IN-STOCK! FAST SHIP! What's included? 1) Keying cable for Hermes Lite 2 (EXTTR jack) to plug into our RBI-1A BUFFERED protective interface 2) RBI-1A Buffered Keying protective interface 3) Cable from output of RBI-1A to Xiegu XPA125B (mini-din), Also works for XPA125PROTECT YOUR Hermes Lite 2 keying circuit, ALWAYS USE THE RBI-1A INTERFACE! Do you need your Hermes Lite 2 to key a different amplifier? Send me a message and I will see if we can make the cable. 73 Dan W7RF (QRZ good) Shielded high copper braid content, stranded copper center amplifier keying cable for the Hermes Lite 2. Use this cable and RBI-1A buffered interface to key (activate) your external power amplifier. The Hermes Lite keying pin provides a closure to ground on transmit which activates our RBI-1AINCLUDES High quality buffered interface between Hermes Lite 2 radio and our RBI-1A will key any amplifier*. Many amplifiers have a voltage or current requirement too high for the delicate keying circuit inside the Hermes Lite 2. Get our cables and buffered interface BEFORE you damage your radio!Our box will draw <5 ma from your radio and will key any amplifier. A very handy accessory. Get one BEFORE you damage your radios amplifier keying output! RCA jacks in and out for keying the interface from your radio and output to your amplifier T/R relay control Needs 9-15 VDC at only 40 ma, has 2.1 x 5.5 mm DC jack, universal plug and 5 feet of wire included, center positive Relay rated up to 240 VAC at 5 AMPS! Genuine relay used for switching (not an easy to damage solid state device) INCLUDES: Hermes Lite 2 keying cable RBI-1A buffered interface Xiegu XPA125B keying cable, 3 feet long These are high quality, high copper braid RCA connector cables See our eBay store listings for our complete line of Amplifier Relay Buffer Interfaces. In other listings we have models with 2 radios and a bypass switch, 2 or more amplifiers or other device (like noise reduction unit keying, mute, etc) When connecting your Radio and Amplifier, there may be switching voltage, polarity, and current incompatibility that can cause damage to your radio or amplifier if connected without a switching interface between them. Even if your internal radio switching looks like it might be usable, it is wise to have an extra degree of isolation between your amplifier and radio with our relay buffer interface. 73, Dan W7RF ( Radiodan ) WE SHIP 5-6 DAYS A WEEK!
Price: 94.95 USD
Location: Fort Collins, Colorado
End Time: 2024-01-31T01:00:26.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Compatible Brand: XPA125B, FX-4CR
Brand: RADIODAN
Type: Amplifier keying cable
MPN: Does Not Apply
Country/Region of Manufacture: United States
To Fit: Hermes Lite 2 to XPA-125B
