Description: HiLetgo Battery Capacity Meter Discharge Tester Analyzer 1.5V-12V Battery Capacity Meter Discharge Tester Product Details Brand: HiLetgo Power Source: Battery Powered Style: Electronic Min. Operating Voltage: 1.5 Volts Measurement Type: Voltmeter Manufacturer: HiLetgo® Part Number: 3-01-1300 Item Weight: 1.13 ounces Package Dimensions: 3.82 x 2.28 x 0.75 inches Item model number: 3-01-1300 Is Discontinued By Manufacturer: No Item Package Quantity: 1 Batteries Included?: No Batteries Required?: No Brand: HiLetgo Power Source: Battery Powered Style: Electronic Min. Operating Voltage: 1.5 Volts Measurement Type: Voltmeter Product description: Instructions: 1. The first test should be fully charged battery. 2. Connect the battery to be tested positive to positive input, a negative input to the negative, can not be reversed (with load reversal may damage the circuit)! Load connected to the output of the positive and negative output, to work through the tester micro USB power supply (not available desktop or laptop USB powered), then the battery voltage. 3. Direct start test need only one press of the "OK" button, the tester can automatically develop an appropriate termination voltage of the battery full charge voltage, and will start flashing after the test three times. Need to develop artificial termination voltage only when the battery voltage display state by pressing "+" or "-" buttons to modify the termination voltage display beginning with P, behind the representative voltage resolution 0.1V, set up after pressing the "OK "start testing. 4. After the start of the test the tester will control the load of the electronic switch is turned on, the test data shows that the process will release capacity (Ah), current discharge current (A) and battery voltage (V) between the wheel was. When the battery voltage reaches the set cut-off voltage, load control switches off the tester display data stays in capacity (Ah) and above and the corresponding indicator flashes quickly together, now displays the actual capacity of the battery is discharging capacity, about the press "OK" to terminate flashing allows stable data display, press again "OK" button to return to the power-on state can just replace the battery test the next section ...... Error codes and their meanings: Err1: battery voltage is above 15V Err2: battery voltage is lower than the termination voltage Err3: Battery can not afford to load or discharge current line too much resistance Err4: overcurrent (current exceeds 3.1A)
Price: 11.99 USD
Location: Denver, Colorado
End Time: 2024-11-26T18:21:52.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Product Type: Does not apply
Battery Type: Does not apply
Chemical Composition: Does not apply
Compatible Battery Type: Does not apply
Charger Type: Does not apply
Model: Does not apply
Coin Cell Diameter: Does not apply
Country/Region of Manufacture: Does not apply
California Prop 65 Warning: Does not apply
Unit Quantity: Does not apply
Unit Type: Does not apply
Power Source: Battery Powered
Style: Electronic
Min. Operating Voltage: 1.5 Volts
Measurement Type: Voltmeter
Manufacturer: HiLetgo®
Part Number: 3-01-1300
Item Weight: 1.13 ounces
Package Dimensions: 3.82 x 2.28 x 0.75 inches
Item model number: 3-01-1300
Is Discontinued By Manufacturer: No
Item Package Quantity: 1
Brand: HiLetgo
MPN: Does not apply
