HoopTech Gen 2 Dream Frame Cap Frame & T-Bar Gage for Tajima Melco Ricoma

Description: HoopTech Gen 2 Dream Frame Cap Frame & T-Bar Gage for Tajima or Melco or Ricoma. PLEASE CALL US OR MESSAGE US WITH WHAT MACHINE YOU HAVE. IF YOU HAVE ANY QUESTIONS CALL. ****NOTE*** YOU WILL NEED to have already purchased a DRIVER or CAP FRAME FOR THIS TO WORK ON YOUR MACHINE. DO NOT PURCHASE THIS IF YOU ARE NOT 100% CERTAIN YOU HAVE THE PROPER DRIVER ON YOUR MACHINE >>> PLEASE CALL US IF YOU ARE NOT SUREFREE SHIPPING IN LOWER US!The new DREAM FRAME from Hoop Tech is the next generation EMS style cap frame. It was specially designed to sew caps on embroidery machines with larger enclosed sewing heads, like the Brother PR Series and Baby Lock.This cap frame is lighter, has backing holding clips, is easier to frame and with the new bill retaining strap you can sew closer to the bill than ever before.The DREAM FRAME will fit TAJIMA - BROTHER - MELCO - TOYOTA - PRODIGI - GENERATIONS - INBRO - MEISTERGRAM & ZSK machines.New DREAM FRAME features…...Backing clips to hold your stabilizer in place during framing.Internal retaining fingers for proper bill alignment.A spring steel bill retainer that sets and holds the bill angle.View ports to use as alignment guides during framing.Lighter frame design (20% less weight) than the original.ATTENTION BROTHER PR & BABY LOCK OWNERSThe new DREAM FRAME will turn your (6) & (10) needle machine into a REAL cap sewing machine. The new bill holding strap holds down the bill so you can get closer to the needles than ever before, for a much larger sewing field.For PR & Baby Lock owners, the Dream Frame comes with a specially designed override bracket that attaches to your cap frame drive bar with one of the 2 thumb screws, and allows you to sew a larger sewing field and also increases the stitching speed. (Just click here to see how easy it is to set up your machine for the dream frame) T Bar Framing Gage by HoopTech The Patented “T”- BAR Framing GageThe EMS / Hoop Tech T-BAR framing gage is the first step to properly framing up a finished cap. The T-BAR Framing Gage featuring the exclusive T-Bar Tensioning Arm, allowing the embroiderer to stretch the front panels of the cap against the top of the gage so that when the cap is clamped by the cap frame it is held in the ideal position for sewing. The framing gage with its lever arm, gives the cap framer a 10 to 1 mechanical advantage when getting the cap to lay flat before sewing. This saves a great deal of energy when framing up large orders. Only Hoop Tech has the patented Tensioning Arm. The Tensioning Arm gives even the inexperienced cap framer the ability to frame a cap tight.....even low profile un-constructed caps. It’s the esiest way to stretch a cap tight. Once you try it, you’ll be amazed at how easy it can be to frame a cap.Framing Gage with Cap Frame installed, ready for a cap.Cap with backing in place, being fitted onto the Framing Gage.PositPioning the T-Bar Tensioning arm in the back of the Cap.Stretching the cap and closing the clamp top prior to latching.Latching the Cap Frame while holding tension on the front panels.Removing from the Framing Gage and ready for sewingThe T-BAR Framing Gage allows the cap framer to pull the cap panels down flat against the surface of the gage. While the cap and backing are sandwiched the Cap Frame is latched, and the cap and backing are locked into place. This marriage of cap and backing is what allows the Hoop Tech Cap Frame to hold the best registration in the business

Price: 823.99 USD

Location: Meridian, Mississippi

End Time: 2024-08-14T16:55:12.000Z

Shipping Cost: 0 USD