KA09 Tin-Zinc Solder 1/16" 1 Ft.

Description: KA09 Tin-Zinc Solder 1/16" 1 Ft.Our Tin-Zinc solder is designed specifically for Aluminum-to-Aluminum and Aluminum-to-Copper soldering. We highly recommend it for soldering aluminum voice coils. Also commonly used to spray and seal capacitors, and is especially applicable in high voltage and power switching applications. It has good corrosion resistance and tensile strength. Melting range begins at 390°F (199°C) and lies between soft solder and Silver brazing alloys, thereby avoiding damage to critical electronics and substrate deformation and segregation. Caution! Soldering aluminum requires a compatible aluminum flux. Ultra Gold Flux is designed to work with KA09 solder in low temperature aluminum soldering. Ultra Gold Flux has been designed specifically for soldering Aluminum to Aluminum and Copper. It is used on Aluminum to Aluminum or Aluminum to Copper wire pigtail splices, and for Aluminum to Copper, Brass or plated terminals and hot dip coating of Aluminum cable connectors to provide a low resistance contact surface. Residue is electrically conductive and slightly corrosive. Any flux residue should be removed with warm water or alcohol and a clean rag. Ultra Gold flux will char at temperatures above 550°F. DO NOT OVERHEAT FLUX.Applications:Aluminum wire to Copper buses or contactsCopper wire to Aluminum buses or contactsJoin electrical/electronic wires and Aluminum fittings, heating panels, high voltage components, and sound equipmentSoldering thin Aluminum sheets, tabs, or wires to Aluminum or Copper connectors or wiresWorking on Aluminum with heat sensitive material or components in close proximityUsed extensively in oven soldering and other automated soldering systemsPaired with Ultra gold flux Properties:CompositionSn (Tin):91%Zn (Zinc):9% Technical Data Density:7.27 g/cc (0.263 lb/in³) Hardness, Brinell:21.5 @ Load 4.00 kg (21.5 @ Load 8.82 lb) Tensile Strength, Ultimate:7930 psi (54.7 MPa) Elongation at Break:32.50% Electrical Resistivity:0.0000110 ohm-cm Heat of Fusion:71.2 J/g (30.6 BTU/lb) Specific Heat Capacity:0.239 J/g-°C (0.272 J/g-°C); [0.0571 BTU/lb-°F (0.0650 BTU/lb-°F)] Thermal Conductivity:61.0 W/m-K @Temperature 85.0 °C (423 BTU-in/hr-ft²-°F @Temperature 185 °F) Melting Range:Eutectic @ 199°C (390°F)

Price: 1.1 USD

Location: Salida, California

End Time: 2024-02-10T17:46:12.000Z

Shipping Cost: N/A USD