KENWOOD KAC-648S 280W Max Power 4/ 3/ 2 Channel Car Amplifier

Description: KENWOOD KAC-648S 280W Max Power 4/ 3/ 2 Channel Car Amplifier Item Description: -Good condition. Very few scuffs/scrapes. -Measures approximately 11.25" x 8.25" x 2.25". -About the Kenwood KAC-648S Kenwood's KAC-648S 4-channel amp features selectable high-pass (150 Hz) and low-pass (80 Hz) crossovers, front and rear. And you'll have multiple hookup options. Drive 2 pairs of stereo speakers, or bridge the 2 rear channels to power your subwoofer, and use the 2 front channels for your main stereo pair. Photos shown are of the exact item(s) you will receive; see photos for condition details. Check out my other Fascinating Finds! I am happy to combine shipping when able. This 4-channel Kenwood is built with MOSFET-switching power supplies for fast response, maximum output, and cooler operating temperatures. Larger-than-usual noise-suppression filters make sure that all you hear is music. Speaker-level inputs allow easy connection to any head unit. Details: *2-, 3-, 4-channel, or Tri-Way output *70 watts x 2 in bridged mode *35 watts x 4 at 2 ohms *requires 10-gauge power and ground leads wiring and hardware not included with amplifier *anti-thump circuit for quiet turn-on speaker short, thermal overload, and DC protection *extra-large toroidal noise filters *speaker-level inputs *gold-plated preamp outputs *80 Hz selectable low-pass crossover, 12 dB/octave *150 Hz selectable high-pass crossover, 12 dB/octave *10-3/4"W x 2-1/4"H x 11-1/2"DFeatures & specs Performance: *RMS Power Output (Watts x Channels)25 x 4 *Peak Power Output (Watts x Channels)50 x 4 *Power at 2 Ohms (Watts x Channels)35 x 4 *Power at 1 Ohm (Watts x Channels)--- *Bridged Power (Watts x Channels)70 x 2 *Minimum Impedance Bridged4 *Minimum Impedance Unbridged2 *Minimum Impedance2 *Best Frequency Response10-45k Hz *THD at Rated RMS Power0.08% *Signal to Noise Ratio100 dB Features: *Amplifier ClassAB *Low-Pass Crossover Frequency80 Hz *Low-Pass Slope (dB/octave)12 dB *High-Pass Crossover Frequency150 Hz *High-Pass Slope (dB/octave)12 dB *Bass BoostNo *Bass Boost FrequencyN/A *Fan CooledNo *Fuse Rating25 x 1 *Speaker Level Inputs--- *Preamp Outputs1 pair Gold RCA *Width (inches)10-3/4 *Height (inches)2-1/4 *Depth (inches)11-1/2 Specifications: *Max Power Output (4 ohms): *4 Channel Operation: 50 Watts x 4 *3 Channel Operation: 50 Watts x 2 + 140 Watts x 1 *2 Channel Operation: 140 Watts x 2 Rated Power Output (4 ohms): *4 Channel Operation: 25W x 4 (20-20kHz, 0.08% THD) *3 Channel Operation: 25W x 2 (1 kHz, 0.08 THD) + 70W x 1(1kHz, 0.8%THD) *2 Channel Operation: 70W x 2 (1 kHz, 0.8% THD) *Rated Power Output (2 ohms): *4 Channel Operation: 35 Watts x 4 (1kHz, 0.8% THD) Features; Protection Circuitry activates: *When a speaker output contacts ground *When the temperature of internal parts exceeds 120 degrees Celsius (248 degrees Fahrenheit) *When a ground cable of the center unit or this amp is not connected to a metal part serving as an electrical ground passing electricity to the battery's negative terminal. Controls on the Unit: *Two Input Sensitivity controls (variable) *Two Operation Switches (stereo/mono) *Two Filter Switches: High pass (Fixed at 150 Hz, 12 dB/Octave, works on speaker outputs), OFF, Low pass (Fixed at 80 Hz, 12dB/Octave) *Input Selector (A/B, A): You can use a source unit with two pairs of RCA outputs, or to use just one pair of RCA inputs which are amplified by all channels. Inputs and Outputs; *Connections on the Unit (All are gold plated): *Battery, Ground, and Remote connectors Speaker Outputs Speaker Level Inputs: *Line In (Preamp) *Line Out (preamp) to connect another amp - this is a full range output.

Price: 69.49 USD

Location: Gary, Indiana

End Time: 2024-11-17T17:30:09.000Z

Shipping Cost: N/A USD